Loading ...
Loading ...
Loading ...
Changing the program sequence
44
Payment system
Opening the door or canceling the
program after it has started may cause
a loss of credit (depending on how the
tumble dryer was set up*).
* Either during the commissioning
process or subsequently, Technical
Service can reset the payment system
so that programming changes can be
made.
Changing a program once it
has started
You cannot change to another program
once a program has started (this
prevents unintentional alterations). You
will need to cancel the current program
before you can select a new one.
Risk of fire due to incorrect use
and operation.
The laundry can burn and destroy
the tumble dryer and the
surroundings.
Read and observe the “IMPORTANT
SAFETY INSTRUCTIONS”.
Canceling a program
Touch the Start/Stopsensor control.
A message will appear in the display
asking if you wish to cancel the
program.
Touch the Yessensor control.
Reselecting a canceled program
Open and close the door.
Select and start a new program.
Adding laundry
Open the door.
Risk of burns by touching hot
laundry in the drum.
You could burn yourself.
Let the laundry cool down and
remove it carefully.
Add items.
Close the door.
Start the program.
Interruption to the power
supply
If the power supply is interrupted
because the tumble dryer has been
switched off with the button:
Switch the tumble dryer on.
Touch the Start/Stopsensor control.
If the power supply is interrupted by a
power cut:
When power is restored, confirm with
OK.
Touch the Start/Stopsensor control.
Time left
Altering the program sequence can
cause the program duration shown in
the display to be adjusted.
Loading ...
Loading ...
Loading ...