Loading ...
Loading ...
Loading ...
I 5
StarSense™ is patented technology that allows your telescope to determine its position and
align itself with the night sky automatically. StarSense AutoAlign’s internal camera captures an
image of the sky, and then analyzes it to identify the stars in the image. Based on this information,
StarSense can determine the coordinates of the center of the image. After repeating this
process a few times, the system can create an accurate model of the night sky. Once alignment
is complete, you can select any celestial object in the hand control’s database, and StarSense
will automatically center the object in your eyepiece.
WARNING
• Never look directly at the Sun with the naked eye or with a telescope (unless you have the proper solar
filter). Permanent and irreversible eye damage may result.
• Never use your telescope to project an image of the Sun onto any surface. Internal heat build-up can
damage the telescope and any accessories attached to it.
• Never use an eyepiece solar filter or a Herschel Wedge. Internal heat build-up inside the telescope can
cause these devices to crack or break, allowing unfiltered sunlight to pass through to the eye.
• Do not leave the telescope unsupervised, especially when adults are unfamiliar with your telescope
or children are present.
WHAT’S IN THE BOX
INTRODUCTION
StarSense Hand ControlStarSense Camera
Large Camera Bracket
& Large Bracket Base
(pre-installed on camera in box)
Camera to
Auxiliary
Port Cable
Small Camera Bracket 2 Thumbscrews
for Large Camera
Bracket
4mm Allen
Wrench
Loading ...
Loading ...
Loading ...