Loading ...
Loading ...
Loading ...
25
Frequently Asked Questions
Q: Why did I suddenly begin getting interference? During sound check, everything was fine – but after the show began, I
started getting interference.
A: Another radio system that wasn’t on during sound check began transmitting on, or near your system’s frequency. If this
happens, ClearScan you system again to find a new, clear frequency.
Q: I’ve hear the term line-or-sight. What does that mean?
A: In a wireless microphone system, line-of-sight means that optimal performance occurs within one room, with no walls or
structural barriers between the transmitter and receiver antennas. Any wall or enclosure the transmitted signal must pass
through will diminish the transmitted signal strength at the receiver. Your receiver antennas should be in the room your
transmitter is operating within and out in the open, unobstructed by walls or enclosures.
Q: Can I move the receiver antennas that came with my R300 system to another location?
A: Only with the appropriate hardware. And only to the appropriate location. The flexible ½-wave dipole antennas which
came with your system only function when connected directly to your receiver’s antenna jacks, or when front-mounted in a
19-inch audio rack with the R300 antenna mounting hardware listed in the system accessories table in this guide. Moving
these antennas anywhere outside of the rack (such as on a stand or mounted to a wall) will not work. If your needs include the
remote mounting of receiver antennas, you must use antennas designed for that application, such as the LPA500 log periodic
antenna.
Loading ...
Loading ...
Loading ...