Loading ...
Loading ...
Loading ...
SONANCE
|
PROFESSIONAL SERIES PENDANT
|
INSTALLATION MANUAL 5
PAINTING THE SPEAKER SHELL
Sonance Professional Series Pendant speakers feature a tough
polypropylene enclosure that can be painted. Sonance recommends
using a weather-resistant outdoor paint and a spray gun.
1. If they have already been installed, remove the grilles from
the speakers.
2. To protect the speaker driver units during painting, place the
grilles on a piece of cardboard and trace around their outlines.
Then cut the cardboard just inside of the trace line and fit these
“paint plugs” into the speakers’ baffles. (Be careful not to
damage the driver components while fitting the paint plugs.)
3. Paint the speakers the desired color according to the paint
manufacturer’s instructions. Remove the paint plugs after the
paint has thoroughly dried.
PAINTING THE GRILLES
1. Prime the grille with a metal primer/bonder in a spray can.
Carefully follow the manufacturer’s directions on the can.
2. We recommend using water-based latex paint on the grilles.
Thin the paint with a proper thinning agent to a ratio of 1:1
paint-to-thinner, and strain it through a standard mesh strainer
to remove any lumps.
3. Use a small touch-up gun or cap-spray gun with a #3 tip
for painting.
a. Set the nozzle with a medium to wide fan
b. Set the pressure regulator to 60psi
c. Lightly spray the front of the grille in 3 quick strokes from
approximately 10 inches away.
d. Let the paint set for a minute, then turn the grille 90° and lightly
spray the grille again in 3 quick strokes. Repeat this step until all
four sides of the grille have been evenly painted evenly.
4. While the paint is still wet, inspect the grille and make sure that
excess paint has not collected underneath the grille frame, and
that none of the grille perforations are filled with paint. If any
are, use compressed air to blow the paint out of the perforations.
IMPORTANT: IF YOU FIND ANY GRILLE PERFORATIONS THAT
ARE PLUGGED WITH PAINT AFTER THE PAINT HAS DRIED, USE
A STRAIGHT PIN OR SEWING NEEDLE TO CAREFULLY REMOVE
THE PAINT.
5. Once the paint has thoroughly dried, replace the scrim cloth on
the back of the grille and mount the grille on the speaker.
Gripple Fasteners Carrying Capacity
PS-P43T
KGS
3.01
5.48
8.50
POUNDS
6.64
12.08
18.74
MODEL
PS-P63T
PS-P83T / PS-P83WT
FIGURE 3: GRIPPLE FASTENERS CARRYING CAPACITY
CARRYING CAPACITY
OF GRIPPLE FASTENERS
Sonance Professional Series Pendant speakers are supplied with
Gripple hangers and suspension hardware that exceeds the
required weight requirements. (See figure 3, as well as separate
hanging hardware instruction sheet).
Loading ...
Loading ...
Loading ...