Loading ...
Loading ...
Loading ...
50
ALERTS
DISPLAYED MESSAGE POSSIBLE CAUSE WHAT TO DO
Ground too fine.
Adjust mill 1 click
while in operation
The grinding is
too fine and the
coffee is delivered
too slowly or
not at all.
Repeat coffee delivery and turn the
grinding adjustment dial one click
clockwise towards
7 while the coffee
mill is in operation. If after making at
least two coffees, delivery is still too
slow, repeat the correction procedure,
turning the grinding adjustment dial
another click until delivery is correct (see
section ‘Adjusting the coffee mill’). If the
problem persists, make sure the water
tank is fully inserted.
If you’re using a
water softener filter
,
an air bubble may
have been released
inside the circuit,
obstructing delivery.
Deliver some water through the
hot water spout until the flow
becomes regular.
GENERAL ALARM:
REFER TO
USER MANUAL
The inside of
the appliance is
very dirty.
Clean the inside of the appliance
thoroughly, as described in section
‘Care and cleaning’. If the message is
still displayed after cleaning, contact
Customer Care.
!
The appliance
needs descaling and/
or the filter must
be replaced.
The descaling procedure described
in the ‘Descaling’ section, needs to
be performed and/or the filter needs
replacing or removing as described
in section ‘Water filter’.
The tubes inside
the milk container
must be cleaned.
Turn the froth adjustment dial to CLEAN.
The filter must
be replaced.
Replace the filter or remove it as
described in section ‘Water filter’.
The machine must
be descaled.
The descaling procedure described
in section ‘Descaling’ needs to
be performed.
The auto-start
function is enabled.
To disable the function, refer to the
instructions under ‘Auto start’.
Energy saving
is enabled.
To disable energy saving, refer to
instructions under ‘Settings’.
Loading ...
Loading ...
Loading ...