Remington PF7855A Virtually Indestructible Foil Shaver for male 5100 PF7855, Yellow

Use and Care Guide - Page 13

For PF7855A. Also, The document are for others Remington models: PF7855*

PDF File Manual, 14 pages, Read Online | Download pdf file

PF7855A photo
Loading ...
Loading ...
Loading ...
Monthly Cleaning:
1. Perform the daily
cleaning steps 1-4.
2. Place a drop of
liquid soap on
each cutter and
in the hairpocket.
(Diagram M)
3. Brush the soap
around vigorously
with the supplied
cleaning brush.
Be sure to work
the soap into the
corners of the
hairpocket and into
any especially dirty
cutters.
(Diagram N)
4. Add a small amount
of water to the
cutters.
5. Replace the foil
assembly.
(Diagram O)
6. Turn on the shaver
for approximately
30 seconds.
7. While the shaver is running, rinse
the foils under running water.
(Diagram P)
8. Turn off shaver.
9. Remove foil assembly.
10.Rinse the cutters, hairpocket,
and foil assembly thoroughly.
(Diagram Q)
11. Shake off excess water.
12. Replace foil assembly. (Diagram O)
13. Allow shaver to dry before next
use and attach the Stubble comb/
Head guard.
Do not remove or replace head
assembly while shaver is running
as it may cause damage to the
unit’s foils and cutters.
To clean the external surfaces of
the shaver, use a damp cloth. Do
not use strong detergents or other
chemicals.
To dry, wipe the surface of the
shaver with a dry towel. Do not use
a hair dryer or heater to dry the
shaver.
The shaver should not be used until
it has dried.
Lubricate each cutter with
household oil.
This product contains no user
serviceable parts.
The shaver is a
wet/dry appliance.
The shaver may
be cleaned under
warm water.
Trim
Cleaning and Care
NOTE: When cleaning your shaver,
make sure the shaver is turned off
and disconnected from the power
adapter.
For optimal shaver performance,
clean your shaver after each use.
CAUTION!
Shaver can be placed under
running water for cleaning only.
Never submerge the shaver in
water.
1. Slide trimmer release button
up to engage the trimmer.
(Diagram F)
2. Trim long, difficult hairs and
side burns.
(Diagram G)
3. Close trimmer by sliding the
button down. (Diagram H)
Daily Cleaning:
1. Pull off Stubble comb/Head guard, if
using, and rinse attachment.
2. Grasp the front
and back of the
cutter assembly
and pull away from
the shaver body.
(Diagram I)
3. Tap the stubble
from the foils and
cutters.
4. Use the cleaning
brush to sweep
any loose hairs
from the cutters,
hairpocket, and
trimmer. Pay
close attention
to cleaning out
the corners and
crevices inside
the hairpocket.
(Diagrams JK)
5. Rinse head under running water.
6. Gently dry with towel or leave
disassembled to air dry.
7. Replace hair pocket assembly when
dry. (Diagram L)
8. Reattach the Stubble comb/Head
guard to protect the shaving head
until next use.
When your rechargeable shaver reaches
the end of its useful life, the batteries
must be removed from the shaver and
recycled or disposed of properly in
accordance with your state and local
requirements. If this is not required by
law, you may elect to dispose of the
shaver with the batteries.
This device uses one of the following
types of rechargeable batteries: nickel
metal hydride (NiMH), nickel cadmium
(Ni-Cd) or Lithium Ion (Li-Ion) (see
included battery for indication of type).
CAUTION: ALL RECHARGEABLE
BATTERIES MUST BE RECYCLED
OR DISPOSED OF IN ACCORDANCE
WITH APPLICABLE STATE AND LOCAL
REGULATIONS. DO NOT PUT IN FIRE
OR MUTILATE, AS THE BATTERY
MAY BURST OR RELEASE TOXIC
MATERIALS. DO NOT SHORT-CIRCUIT,
AS THIS MAY CAUSE BURNS.
Product Disposal
To Remove the Rechargeable Battery:
1. Remove phillips head screw at the
base of the shaver.
2. Pry the outer sleeve down off the
shaver handle.
3. Pry the back housing cover off the
shaver.
4. Remove screws from inner housing
and open inner housing to expose
the batteries.
5. Snip the battery wires and remove
batteries.
6. Dispose of battery properly.
Spectrum Brands, Inc. is a proud partici-
pant in the EPA-approved Rechargeable
Battery Recycling Call2RecycleTM,
which collects and recycles these bat-
teries at the end of their useful life
when taken out of services in the United
States.
The RBRC® program provides a conve-
nient alternative to placing used batter-
ies into the trash or the municipal waste
stream, which may be illegal in your
area. Please call 1-800-8-BATTERYTM
or visit www.call2recycle.org for infor-
mation on LiFePO4 battery recycling and
disposal bans/restriction in your area.
Spectrum Brands, Inc.'s involvement
in this program is part of our commit-
ment to preserving our environment and
conserving our natural resources.
Maintain your shaver’s peak
performance! Keep your shaver
performing like new!
Because your satisfaction is
important to us, we want to make
it simple for you to keep your new
shaver performing at its peak.
For the best possible shave, it is
necessary to replace the heads and
cutters on your shaver every 12
months.
Remington makes this easy!
Two easy ways to order!
1. Call!
U.S. residents call 800-392-6544
2. Order Online at
RemingtonProducts.com
Warranty
How to Order Shaver Accessories
Please refer to the shaver compari-
son and features chart near the
front of this manual that lists the
correct replacement part number
for your shaver.
It is very important to replace your
head and cutters when necessary to
ensure a close, comfortable shave
without irritation. We recommend they
be replaced every 12 months. Here
are some signs of head and cutter
wear, indicating that replacement
is needed:
Irritation: As the heads get
excessively worn you may
experience some skin irritation.
This would be especially noticeable
when you apply moisturizing lotion.
Pulling: When the cutters wear you
may feel a sense of pulling and a
loss of closeness when you shave.
This is an indication that it is time
to replace your heads and cutters.
100-240 VAC, 50/60 Hz
TYPE: F20A
Questions or comments:
Call 800-736-4648 in the U.S. or visit RemingtonProducts.com
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
REMINGTON is a Registered Trademark of Spectrum Brands, Inc.
© 2019 Spectrum Brands, Inc. 8/19
26158
Made in China.
T22-7001219-A
Contains a
listed adapter
IMPORTANT SAFETY INSTRUCTIONS -
SAVE THESE INSTRUCTIONS
DANGER - TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS
For connection to a power supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet.
Power Adaptor
F
G
H
L
I
J
K
P
N
O
Q
M
Lifetime Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for the life of the product. This warranty does not
include damage to the product resulting from accident or misuse.
If the product should become defective, we will replace it free of charge. Return
your product with your name, address and day time phone number to: Remington
Returns Center, 507 Stokely Dr., P.O. Box 1, Deforest, WI 53532. For more informa-
tion call 800-736-4648 in the US or
800-268-0425 in Canada.
Warranty excludes:
The heads and cutters are not included in lifetime warranty
This warranty does not cover products damaged by the following:
Accident, misuse, abuse or alteration of the product
Servicing by unauthorized persons
Use with unauthorized accessories
Connecting it to incorrect current and voltage
Wrapping cord around appliance causing premature wear & breakage
Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or mainte-
nance of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO THE LIFE OF THE PRODUCT.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
This warranty shall not be valid where it is contrary to U.S. and other appli-
cable laws, or where the warranty would be prohibited under any economic
sanctions, export control laws, embargos, or other restrictive trade mea-
sures enforced by the United States or other applicable jurisdictions. This
includes, without limitation, any warranty claims implicating parties from,
or otherwise located in, Cuba, Iran, North Korea, Syria and the disputed
Crimea region.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington branded product, you
are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30
days from the date of purchase. If you have any questions concerning the money-
back guarantee, please call 800-736-4648 in the US.
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington branded product, you are not
completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington and receive a full refund.** For questions
concerning the money-back guarantee, please call 800-736-4648 in the US.
*Applies to US and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington branded Men’s Shave and Groom
product:
a. The Remington product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
Questions or comments: Call 800-736-4648 in the U.S. or visit
RemingtonProducts.com.
Loading ...