Loading ...
Loading ...
Loading ...
Basic Operation
DSO1000B(V) Series HandHeld Oscilloscope User Manual 33
30
LRR
The time between the first rising edge of source 1 and the last
rising edge of source 2.
31
FFR
The time between the first falling edge of source 1 and the first
rising edge of source 2.
32
FRF
The time between the first rising edge of source 1 and the first
falling edge of source 2.
Off
Do not take any measurement.
Taking Measurements: For a single waveform (or a waveform divided among multiple
waveforms), up to 4 automatic measurements can be displayed at a time. The waveform channel
must stay in an ‘ON’ (displayed) state to facilitate the measurement. The automatic measurement
can not be performed on reference or math waveforms, or in XY or Scan mode.
5.5.3 ACQUIRE
Press “UTILITY” key to enter the Utility menu and turn to the page 4/5 and then Push the
ACQUIRE key to set the acquisition parameter.
Options
Settings
Comments
Type
Real Time
Equ-Time
Acquire waveforms by real-time digital technique.
Rebuild waveforms by equivalent sample technique.
Mode
(Real Time)
Normal
Peak Detect
Average
Acquire and accurately display most waveforms.
Detect glitches and eliminate the possibility of
aliasing.
Reduce random or uncorrelated noise in signal
display. The number of averages is selectable.
Averages
(Real Time)
4
8
16
32
Select the number of averages.
The readouts in big font size on
the menu are just results of the
corresponding measurements.
Loading ...
Loading ...
Loading ...