Loading ...
Loading ...
Loading ...
HIGH-SPEED STEEL BLADE
U
S
R
W
V
T
U
R
S
W
V
T
FIG. 11A FIG. 11B FIG. 11C
FIG. 11
U
Y
W
X
V
CARBIDE BLADE
FIG. 12A
Z
R
S
AA
W
V
T
Z
S
R
W
AA
V
T
FIG. 12B FIG. 12C
FIG. 12
AA Z
Y
W
X
V
3. To Reinstall Blade (Fig. 10A, 10B)
a. Cautiously remove the adjusted
guide bar/high-speed steel blade
assembly from the gauge plate (X)
and place the heel of the guide bar
(W) into the groove in the drum (T).
b. Set the drum cover (S) over the
adjusted guide bar/high-speed
steel blade assembly and securely
tighten the three star head screws
(R) to the drum.
4. Repeat procedure for the other blade.
NOTE: In order to use high-speed steel
blades with this planer, the sharpening
holder (BB) is required to sharpen high-
speed steel blades and is available at
additional cost from your local D
E
WALT
authorized service center.
REVERSIBLE CARBIDE BLADES
(FIG.12)
1. To Remove Blade from Planer
(Fig.12B)
a. Loosen and remove the three star
head screws (R) with the T25 star
key (EE) provided. Remove the
drum cover (S) from the drum (T).
b. Remove the blade carrier/guide bar
assembly (V, W, Z). Carefully remove
the carbide blade (Z).
2. To Adjust Blade Using Gauge Plate
(provided with tool) (Fig. 12C)
a. Cautiously place the sharp edge of
the carbide blade (Z) on the gauge
W
English
14
Loading ...
Loading ...
Loading ...