Ryobi RY142022 2000 PSI 1.2 GPM Cold Water Corded Electric Pressure Washer

OPERATOR’S MANUAL - Page 12

For RY142022.

PDF File Manual, 52 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
8 — English
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Electric Pressure Washer
25 ft. High Pressure Hose
Trigger Handle
Spray Wand
Nozzles (15º, Turbo, Soap)
Handle Assembly with Screws
Wheels (2)
Axles (2)
Hitch Pins (2)
Wheel Caps (2)
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is com-
plete. Failure to comply could result in accidental starting
and possible serious personal injury.
INSTALLING THE WHEELS
See Figure 4.
฀฀฀฀฀฀ Locate the axles, hitch pins, wheel caps, and wheels.
฀฀฀฀฀฀ Slide the axle through the hole in the center of the wheel.
฀฀฀฀฀฀ Lift the machine and slide the axle into the wheel mount-
ing hole in the machine base as shown.
฀฀฀฀฀฀ Push the hitch pin into the hole on the end of the axle to
secure the wheel assembly.
NOTE: The hitch pin should be pushed into the axle until
the center of the pin rests on top of the axle.
฀฀฀฀฀฀ Insert the wheel cap onto the wheel.
฀฀฀฀฀฀ Repeat with the second wheel.
RETRACTABLE HANDLE
The pressure washer is equipped with a retractable handle
that can be adjusted for storage and transportation.
SOAP NOZZLE
The blue or black soap nozzle is used to apply detergent at
low pressure only.
SOAP TANK
Remove the cap from the soap tank to add detergent to the
pressure washer.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK-OUT
Pulling the trigger releases a stream of water for high pres-
sure cleaning. The lock-out provides protection against
unauthorized use.
FEATURES
ASSEMBLY
Loading ...
Loading ...
Loading ...