Loading ...
Loading ...
Loading ...
Features
5
Network Interface
A
Ethernet Port: RJ45 jack connects the PDU’s Network Interface to the network
using a standard Ethernet patch cable. LEDs
A1
and
A2
indicate the operating
conditions (shown in the table below).
B
RJ45 Configuration Port: Use this port to provide a direct terminal connection
to a computer with a terminal emulation program. An RJ45 to DB9 cable (part
number 73-1243) is included with the PDU. To request a replacement cable,
visit www.tripplite.com for ordering information.
C
USB Type-A Port: Use this port to connect up to three linked Tripp Lite
EnviroSense2 modules (E2MT, E2MTDO, E2MTDI, E2MTHDI) for a variety of
environmental monitoring and control options. See www.tripplite.com for more
information about these modules.
Note: Do not connect a keyboard or mouse to this port.
D
Reset Button: Accessible through a small hole on the faceplate above the RJ45
Configuration Port. Press once to reset the Network Interface. Press and hold for
15 seconds to reset the Network Interface to factory default settings.
Note: PDU loads will not be affected.
E
Status LED: Shows the Network Interface status (shown in the table below).
Identifier LED Function LED Color Status Description
A1
Ethernet
Link/Activity
Indicator
Green Flashing There is network activity on the port
Off There is no network activity on the
port
A2
Ethernet
Network
Speed
Indicator
Yellow On steady 100 Mbps network speed
Off
10 Mbps speed if
A1
is flashing
Off
No network activity if
A1
is also off
E
Network
Interface
Status
Green On steady Normal operation
Single flash Power up indicator
Green/
Orange
Off No power or card is initializing
Alternating
(~1/sec.)
Software update in progress
Alternating
(~2/sec.)
Restoring factory default
configuration
A
A2 A1
BD
E
C
21-03-427-9336CA.indb 521-03-427-9336CA.indb 5 4/5/2021 3:20:57 PM4/5/2021 3:20:57 PM
Loading ...
Loading ...
Loading ...