Loading ...
Loading ...
Loading ...
Operation Guide 3407
E-39
To set the timer start time
●
In the Timer Mode, hold down
1
A
for about two seconds.
[SET Hold] will appear on the display. After that, [SET
Hold] will disappear and the hours digits will fl ash.
Note
If a timer countdown operation is in progress, press
x
D to stop it and then press B to reset the timer to
its start time before performing the above step.
If a timer countdown operation is paused, press
x B
to reset the timer to its start time before performing
the above step.
●
Each press of
2
C
causes the fl ashing to move between the hours and the
minutes digits.
The fl ashing digits are the ones that are selected.
E-38
Timer
The timer start time can be set in one-minute increments up to 24 hours. The
watch will sound a tone or vibrate for about 10 seconds when the end of the timer
countdown is reached.
See “f. Alert method for alarm/timer” (page E-50).
To enter the Timer Mode
●
In the Timekeeping Mode, press
C
four times
to enter the Timer Mode.
See “Using Modes” (page E-14).
Hours Seconds
Current time
Minutes
E-37
Note
Once started, elapsed time measurement continues until you press
x D to stop
it, even if you change to a different mode and even if the stopwatch reaches
the elapsed time measurement limit.
If you change to another mode while a split time is frozen on the display, split
x
time display will be canceled.
E-36
To measure time with the stopwatch
●
The following shows button operations for stopwatch operations.
Elapsed time/cumulative time x
D D D D B
Start Stop (Restart) (Stop) Reset
Split time (paused elapsed time reading) x
D B B D B
Start Split Split time display
cancel
Stop Reset
Pressing B while timing is being performed displays the split time (with [SPLIT]
fl ashing), but elapsed timing continues internally.
E-35
Stopwatch
The stopwatch measures elapsed time in units of 1/100 seconds up to 23 hours,
59 minutes, 59.99 seconds. Elapsed time returns to zero automatically and timing
continues from there when the maximum limit is reached.
To enter the Stopwatch Mode
●
In the Timekeeping Mode, press
C
three
times to enter the Stopwatch Mode.
See “Using Modes” (page E-14).
[STW] will appear on the display for about
one second, and then the stopwatch screen
will appear.
Seconds
Minutes 1/100 second
Hours
Current time
E-34
●
After all the settings are the way you want, press
6
A
to exit the setting
screen.
●
To return to the Timekeeping Mode, press
7
C
four times.
To stop a tone/vibration alert operation
●
Double-tapping the center of the watch display or pressing any one of the
buttons will stop an ongoing tone/vibration alert operation.
To test the alarm
●
In the Alarm Mode, hold down
D
to perform the tone/vibration alert
operations.
E-33
●
To change an alarm time setting, hold down
3
A
for about two seconds until
the hour digits of the current alarm time start to fl ash.
[SET Hold] will appear on the display. After that, [SET
Hold] will disappear and the hour digits will fl ash.
●
Each press of
4
C
causes the fl ashing to move between the hour and the
minutes digits.
The fl ashing digits are the ones that are selected.
●
Use
5
B
and
D
to change the fl ashing setting, and set the hour and minutes
you want.
Holding down either button scrolls the setting at high speed.
x
If you are using 12-hour timekeeping, the PM indicator will appear for times x
between noon and 11:59 p.m.
E-32
The Alarm indicator is displayed while an alarm is turned on, while the Hourly
time signal indicator is displayed while the hourly time signal is turned on.
Alarm on Hourly time signal on
Alarm indicator Hourly time signal indicator
E-31
●
Use
2
B
to select the alarm type or to toggle the hourly time signal between
on and off.
Alarm Types
: Alarm does not sound.
:
Alarm sounds only once at the preset time and does not sound again after
that.
: Alarm sounds at the preset time each day.
Hourly time signal
: Hourly time signal does not sound.
: Hourly time signal sounds every hour on the hour.
E-30
To change an alarm setting
●
In the Alarm Mode, use
1
D
to select the alarm whose setting you want to
change.
Alarm 1
( )
D D
Alarm 2
( )
Alarm 3
( )
Alarm 4
( )
Hourly Time
Signal ( )
Alarm 5
( )
DD
D D
Loading ...
Loading ...
Loading ...