Loading ...
A. Turn off water supplies and drain lines.
B. Clean installation site, remove any debris from
the area.
C. Place faucet with Gasket(1)into singe hole deck.
D. Assemble Rubber Washer(4), BRASS for metal
washer(5), and threaded Lock Nut (6) on to
Shank(2) from underside of sink or mounting
surfaces. Hand tighten Lock Nut(6),Use a screw
driver to tighten Screws(7) on lock Nut(6).Work
your way around Lock Nut(6). Tightening the
screws sightly each time until all are snug to
ensure even pressure.
A. Move handle into "OFF" position.
B. Turn on water supplies. Check connections for leaks.
C. Remove hand shower and let both hot and cold water
run for one minute. This will help clean any debris that
might otherwise clog the system. Replace hand shower.
D. Operate handle up and down, in cold and hot positions,
to flush water lines thoroughly.
Three Hole InstallationInstallation size map
Single Hole Installation
Test Faucet Installation
Simply rinse the surface with clear water or
mild liquid detergents
if necessary Dry the
faucet with a clean soft cotton cloth
Do not
use any cleaning agents containing
acids
polish abrasives or harsh cleaners
Maintenance:
Spout body
Sink Deck
Loading ...