Loading ...
Loading ...
Loading ...
10
T11 DAB/FM Stereo Tuner
DAB RADIO
Make sure that your local area can receive Digital Audio Broadcast (DAB)
broadcasting signal.
Press the DAB
6
button on the front of the panel, or remote
K
.
DAB channels are categorized into ensembles, which are also known as
multiplexes. Each multiplex provides a number of stations and each service
contains a primary service that can contain secondary services. DAB
technology allows broadcasters to transmit additional data along with the
audio, which can include other audio channels, text and even images and
computer data in the future.
DAB Radio Station Playing
1. Select DAB
6
Button from the front panel and the unit will scan for
available stations. After scanning you will see the following menu.
Station List
> BBC 1
BBC 2
2. Press the ENT
B
button on the remote control to select the station and
start playing the station.
Storing a DAB station in a preset
While a DAB station is playing, push the memory button
8E
, then press
the number of preset assigned from numeric keypad
3D
. Up to 30 preset
DAB radio stations may be stored.
Playing a preset DAB station
When a DAB station is playing, you can switch to a preset station in one
of the following ways.
1. From the numeric keypad
3D
, press the preset number of the desired
station.
2. Press the PRESET +/-
F
buttons on the remote to view preset numbers
and corresponding station. Press the up/down
B
arrow buttons or the
PRESET +/-
F
buttons on the remote control or turn the knob
7
on the
front panel to choose the desired station, then press the ENT
B
button
on the remote control.
DAB Settings Menu
Press the DAB
6
on the front panel or remote
K
to toggle to the DAB
settings Menu. Turn the knob on the front panel or use the up/down arrow
buttons on the remote control to go through each sub-menu.
• Station List: Shows station list.
• Local Scan: Start a limited scan of available stations by pressing the ENT
B
button on the remote control. (Not available in all markets).
• Full Scan: Start a full range scan of available stations by pressing the
ENT
B
button on the remote control.
• Manual Tune: Press the ENT
B
button on the remote control and select
stations manually by turning the knob on the front panel or using the up/
down
B
arrow buttons on the remote control.
• DRC, Dynamic Range Control: Select between “High”, “Low” and “Off”.
Press the ENT
B
button on the remote control and turn the knob on the
front panel or use the up/down
B
arrow buttons on the remote control
to change.
• Station Order: Display station order as either “Alphanumeric“, “Ensemble”
or “Valid”.
• Prune Station: Select between “Yes” or “No”. The Prune setting allows you
to remove stations that are not active or can not be received.
NOTE: Prune will remove unavailable stations from both the Station
List and the DAB Preset List.
• DAB Preset: Displays all 30 of the DAB/DAB+ preset stations and allows
tuning to the selected preset by pressing the ENT
B
button on the remote
control.
Remote Unit Advanced Buttons
SETUP
To enter the setup menu, press the MENU
H
button on the remote control
and you will see the following display:
SETUP
> Dimmer
Version
• Dimmer: Controls the brightness of the front panel display, it can be dimmed
with seven steps. Press the left / right arrow buttons on the remote control
to change the display brightness.
NOTE: This setting is stored permanently even after the unit is powered
off.
To temporarily change the display brightness, press the DIM
C
button on
the remote control.
• Version: Shows the software version loaded in the unit.
• Factory Default: Sets the unit into the original state as when it left the
factory. Presets will be lost.
• Exit: Exits the setup menu.
Loading ...
Loading ...
Loading ...