Loading ...
Loading ...
Loading ...
Additional Features
Sial*Hess Steel IG_/}'igeralor
The refl'igerator doo*3 may the] dittbrent than
the ones wm are used to. The special door
opening/closing Ieature makes sure the doors
close all the way and are secm'elv sealed.
When opening and closing the door you will
notice a stop position. If the door is opened
past this stop point, the door will remain open
to allow vou to load and unload fl_od more
easily. When the door is only partially open,
it will automatically close.
The resistance wm _eel at the stop position will
be reduced as the door is loaded with fl)od.
Whenthe doorisonlypartiallyopen,
it will automaticallyclose.
Beyondthisstep the doorwill stayopen.
Door
alignment
If dooI5 are tmeven, a(!just the refl'igerator door.
1 Using a 7/16" socket wrench, turn the door
a(!justing screw to the right to raise the doo_;
to the lett to lower it. (A nylon plug, imbedded
in the threads of the pill prevents the pin
froln mrlfing tmless a wrench is used.)
2 After one or two turns of the wrench, open
and close the refrigerator door and check the
alignn_ent at the top of the doors.
Toremovethe base
grille,openthe
doors,removethe
screwat eachend
ofthe basegrille
andthenpullthe
grillestraightout.
7/16" SocketWrench
Raise
15
Loading ...
Loading ...
Loading ...