Loading ...
Loading ...
Loading ...
heating gear, and the P gear is rapid heating. After 3 minutes, it will return to the 9 gear. Turn to 0 to
stop
heating.
6.Shutdown: In heating mode, long press
heating
and
return
to
shutdown
state.
the power button (long press for two seconds) to exit
7.Child lock: Press and hold the child lock button for 2-3 seconds, and the child lock can be locked or
unlocked with a beep. After the lock is successful, the child lock number will display Lo, and the child
lock can be operated in the power-off or standby heating state. After the lock is successful, do not
operate
any
steps
except
the
child
lock.
Locked
successfully
as
shown
in
fi
gure:
8.Timing:
This
function
is
to
set
the
shutdown
time.
In
heating
mode,
press
the
timing
button
to
enter
the preset timing. The default time is 00 minutes. Button adjusting time (progressive 1 minute, 99
minutes at most), stop operation after adjustment, digital flashing several times into the steady setting
success. Continuously press the timing button to set the time of multiple furnace areas. After the
setting is completed, the small dot flashes at the lower right corner of the display digital number in the
furnace area. The time display in different furnace areas automatically switches to about 5 seconds,
with
the
small
dot
as
a
mark.
As shown in the picture, timing left upper furnace area: 99 minutes
9. Panel high temperature warning: there is still residual temperature on the furnace panel after use,
warning
display
H,
be
careful
of
scalding
hands.
04
Loading ...
Loading ...
Loading ...