Loading ...
Loading ...
Loading ...
4
attach
top of the stairs installation:
x 4
x4
x 4
peel
x 4
peel
x4
1
Remove adhesive
protectors from back
of the wall cups as you
apply them to the wall.
27.25”
FLOOR
CENTER HOLE
IN UPPER
WALL CUPS
Stick wall cups onto wall
starting with the bottom
cups. The bottom cups
should rest on the oor, the
top cups should be plumb
with the bottom cup with
27.25” distance between the
oor and upper wall cups’
screw hole centers.
3
1
st
2
nd
make sure
all wall cups
are facing up
make sure
all wall cups
are facing up
align
bottom
of wall cups
with floor
align
bottom
of wall cups
with floor
!
!
!
Note: The adhesive mounting
pads are included only for
positioning wall cups and must be
used in conjunction with screws.
x 4
x 4
Note: If mounting
into plaster walls,
use wall anchors. Using
a 7/32 drill bit, drill a
pilot hole into the wall
in the center of each
wall cup, then insert
wall anchor directly into
wall. Secure the wall
cups in place using the
provided screws.
2
Once Wall Cup
Installation is
complete,
proceed to
Gate Frame
Installation
setup steps.
The gate
frame's tension
nuts will nest in
mounting cups.
!
Mounting into plaster or dry wall?
If NO, continue to next step.
!
Fixez les cadres
d’extension au cadre
de barrière
en insérant
les tiges des cadres
d’extension dans
les trous prévus
à cette n dans
le cadre de barrière.
Faites glisser
les vis de tension
dans les trous
du bas et
du haut des
deux côtés
de l’assemblage.
G
x 4
!
• Si vous choisissez la conguration de
barrière A, sautez cette étape.
• Si vous choisissez la conguration B,
n’ajoutez qu’une seule extension à l’un
ou l’autre côté du cadre de barrière.
4
5
13
installation:
x 4
IMPORTANT
For use at top of stairs:
At the top of the landing,
position the gate a minimum of 3-6 inches (8-15cm)
away from the top step.
You MUST install wall cups to keep gate in place.
Without wall cups, child can push out and escape.
WARNING
Loading ...
Loading ...
Loading ...