Loading ...
Loading ...
Loading ...
28
Figure 6-16 Wired zone
Table 6-4 Parameter description
Parameter Description
Area The number cannot be modified.
Type
Select corresponding type according to detector type, including infrared, gas,
smoke, urgency btn, door sensor, stolen, perimeter and doorbell.
NO/NC
Select NO (normally open) or NC (normally closed) according to detector type. It
shall be the same as detector type.
Status
●
Instant
: After armed, if an alarm is triggered,
the device produces siren at once and enters
alarm status.
●
Delay
: After armed, if an alarm is triggered,
the device enters alarm status after a
specified time, during which you can disarm
and cancel the alarm.
●
Bypass
: Alarm will not be triggered in the
area. After disarmed, this area will restore to
normal working status.
●
Remove
: The area is invalid during
arm/disarm.
●
24-Hour
: Alarm will be triggered all the time
in the area regardless of arm or disarm.
A zone in
Remove
status cannot be bypassed.
—
Enter Delay
After entering delay, when armed area triggers an
alarm, entering armed area from non-armed area
within the delay time period will not lead to
linkage alarm. Linkage alarm will be produced if
delay time comes to an end and it is not
disarmed.
Delay is only valid to the
areas of
Delay Alarm
.
Loading ...
Loading ...
Loading ...