SLI4.2 Owner's Manual

Loading ...

WARNINGWARNING

• Before you start your installation, make sure you carefully read and understand all instructions.

Disregarding them might cause accidental harms or damage your devices.

• The vehicle electric system must have 12 VDC voltage with negative to ground. Make sure

 yourcarhasitinordertoavoidanydamagestoyouramplierandtothevehicle.

• Install the device in the vehicle parts where temperature is between 0° C (32° F) and 55° C (131° F).

• Make sure the location you chose for the components does not affect the correct functioning

of the vehicle mechanical and electric devices.

• Do not run the cables or install the device next to electronic gearcases.

• Always wear protective eyewear when using tools that may generate splinters.

• When installation is over, and before plugging the main power supply fuse, check the system

wiring and make sure all connections were done in the right way.

•Safetymustbeattherstplacewhiledriving.Listeningvolumemustnevercovernoisecomingfrom

the outside and from the vehicle, in order for you to be able to promptly face emergency situation.

•AlwaysinsulatetheconnectionbetweentheSLIandtheOEMheadunit/OEMamplierto

avoid damage them.

•AlwaysinsulatetheconnectionbetweentheSLIandthe+12Vpowersupplysystem(battery).

•Alwaysfuse+12VSLIcable(RED)with1Afusetoavoidanydamagetothevehicleelectrical

 systemandoreventofre.

Elettromediawillnotbeliableforthedirectorindirectdamagesduetoawronguseorawrong

connection of the device.

Loading ...

Connection SLI4.2 High To Low Level Conversion Interface For OEM-Integration SLI42