Loading ...
Loading ...
Loading ...
444
Using AGM+. [Press & Hold]
AGM+ charge mode is designed for advanced AGM
batteries only. Advanced AGM batteries are a new
battery technology. These batteries accept a higher than
normal charging voltage. AGM+ charge mode is NOT
suitable for traditional AGM batteries. Consult the battery
manufacturer before using this mode.
CAUTION. USE THIS MODE WITH CARE. THIS MODE
IS FOR LEAD-ACID ADVANCED AGM BATTERIES
ONLY. THIS MODE USES A HIGH CHARGING VOLTAGE
AND MAY CAUSE SOME WATER LOSS IN WET
(FLOODED) CELL BATTERIES OR OVERCHARGE IN
SOME BATTERIES.
Using LI-ION. [Press & Hold]
LI-ION charge mode is for lithium-ion batteries only,
including lithium iron phosphate batteries.
CAUTION. THIS MODE IS FOR LITHIUM BATTERIES
ONLY. LITHIUM-ION BATTERIES ARE MADE AND
CONSTRUCTED IN DIFFERENT WAYS AND SOME MAY
OR MAY NOT CONTAIN A BATTERY MANAGEMENT
SYSTEM (BMS). CONSULT THE LITHIUM BATTERY
MANUFACTURER BEFORE CHARGING AND ASK FOR
RECOMMENDED CHARGING RATES AND VOLTAGES.
SOME LITHIUM-ION BATTERIES MAY BE UNSTABLE
AND UNSUITABLE FOR CHARGING.
Using Repair. [Press & Hold]
Repair is an advanced battery recovery mode for
repairing and storing, old, idle, damaged, stratified or
sulfated batteries. Not all batteries can be recovered.
Batteries tend to become damaged if kept at a low
charge and/or never given the opportunity to receive
a full charge. The most common battery problems are
battery sulfation and stratification. Both battery sulfation
and stratification will artificially raise the open circuit
voltage of the battery, causing the battery to appear fully
charged, while providing low capacity. Use Repair in
attempt to reverse these problems. For optimal results,
take the battery through a full charge cycle, bringing the
battery to full charge, before using this mode. Repair can
Mode Explanation
AGM+
LI-ION
REPAIR
For charging advanced AGM batteries,
which requires a higher than normal
charging voltage. When selected, a
blue LED will illuminate.
For charging lithium-ion batteries,
including lithium iron phosphate. When
selected, a blue LED will illuminate.
An advanced battery recovery mode
for repairing and storing, old, idle,
damaged, stratified or sulfated
batteries. When selected, a red LED
will illuminate and flash.
SUPPLY
Converts to a DC power supply. When
selected, a red LED will illuminate.
Press & Hold
Press & Hold
Press & Hold
Press & Hold
31.2V ± 0.3V | 40A ± 1A
46.8V +/- 0.4V | 26A ± 1A
62.4V +/-0.6V | 20A ± 1A
29.2V ± 0.3V | 40A ± 1A
43.8V +/-0.45V | 26A ± 1A
58.4V +/- 0.6V | 20A ± 1A
32V ± 0.3V | 5A ± 1A
48V +/-0.45V | 5A ± 1A
64V +/-0.6V | 5A ± 1A
GX2440
GX3626
GX4820
GX2440
GX3626
GX4820
GX2440
GX3626
GX4820
27.2V ± 0.3V | 20A ± 1A
40.8V +/-0.45V | 13A ± 1A
54.4V +/-0.6V | 10A ± 1A
GX2440
GX3626
GX4820
Advanced Charging Modes
IMPORTANT: Advanced Charge Modes are modes that
require the users full attention when selecting.
Loading ...
Loading ...
Loading ...