Loading ...
Loading ...
Loading ...
Paper is cut when the print has been completed
By default the printer cuts the paper after the drying time has been completed. You can disable the cutter.
See Change the drying time on page 31. You can disable the cutter, see Turn the automatic cutter on and oîž«
on page 31.
Cutter does not cut well
By default, the printer is set to cut the paper automatically after the drying time has been completed.
If the cutter is turned on but not cutting correctly, check that the cutter rail is clean and clear of any obstacles,
and check that there are no pieces of paper in the cutter groove.
Roll is loose on the spindle
The roll may need to be replaced or reloaded.
78 Chapter 11 Troubleshooting paper issues ENWW
Loading ...
Loading ...
Loading ...