Loading ...
Loading ...
Loading ...
5. Gently place the bathtub in the upside-down position on a tarp or cardboard sheet in order to avoid
contact with any rough surface.
6. This step will be attaching the clawfeet to the bathtub. Please check the previous page to see which
clawfeet model is applicable to your bathtub.
a) Take (1) adjustable foot [#1], place it through
the hole in the clawfoot [#3], and screw (1) nut [#2]
at the bottom of the adjustable foot.
a) Take (1) adjustable foot [#1] and put it through (1)
metal plate [#2], using (1) nut [#3] to tighten the
adjustable foot at the bottom.
b) Take (1) bolt [#4] and (1) washer [#5] and
place them through the metal plate [#8].
c) Take the metal plate and slip it snug with the
clawfoot [#3].
b) Take (1) bolt [#4] and (1) nut with washer [#6]
and screw the nut onto the bolt approximately 1/4
of the length of the bolt.
Repeat Step 1 with the second bolt.
c) Take the bolt & nut & screw them into the clawfoot
as shown in the diagram below. Make sure to tighten
the bolt into the clawfoot using the provided hex key.
1
2
3
3
1
2
3
4
5
8
Applicable models :
N-CFL1775-CH
N-CFL1775-WH
N-CFL1775-BL
N-CFL1775-GLD
N-CFL1912-CH
N-CFL1912-WH
N-CFL1912-BL
N-CFL1912-GLD
Applicable models:
N-CFL11601-CH
N-CFL11601-WH
N-CFL11601-BL
N-CFL11601-GLD
Loading ...
Loading ...
Loading ...