Loading ...
Loading ...
Loading ...
4. Press (C).
This causes the minutes digits to flash.
Minutes
5. Use (B) and (D) to change the timer
minutes setting.
6. Press (C).
This causes the seconds digits to flash.
Seconds
7. Use (B) and (D) to change the seconds
setting.
8. Press (A) to exit the setting screen.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
●
Setting a start time of [0:00 00] will
perform a countdown of 24 hours.
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
Hour, minute, second
2. Use the operations below to perform a
timer operation.
D
D
D
(Time up)
Resume
Pause
(Measurement operation starts.)
Start
●
A beeper will sound for 10 seconds to
let you know when the end of a
countdown is reached.
●
To reset a paused countdown to the
start time, press (A).
3. Press any button to stop the tone.
Other Settings
This section explains other watch settings you
can configure.
Changing the Date Display
Format
You can select either month/day or day/month
as the date display format.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3. Press (C) nine times.
This displays a screen for selecting the
date display format.
4. Use (D) to select a date display format.
M: Month
DD: Day
Day, monthMonth, day
5. Press (A) to exit the setting screen.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Watch Operation Guide 3496
14
Loading ...
Loading ...
Loading ...