Loading ...
Loading ...
Loading ...
CHOOSINGCYCLES
(SELECTCYCLE/TemperaturePads)
Usethesepadstochoosetherightdrying
cycleforthetypeofloadyouare drying.
Each time you select a cycle, the preset
cycle settings are displayed.
NOTE: A range of heat is automatically
set for the type of fabric selected. See
page 34 for suggested dryer settings for
your load type.
SELECT CYCLE
TEMPERATURE
_MED'F_IGH HEA_ _ HIGH HEAT _
-@
C OTTO N
Use this cycle to get high heat for heavy
fabrics. The estimated drying time is 40
minutes.
NORMAL
Use this cycle to get medium high heat for
sturdy fabrics. The estimated drying time
is 40 minutes.
PERMANENT PRESS
Use this cycle to get medium heat for syn-
thetic fabrics and no-iron finishes, The
estimated drying time is 36 minutes.
KN_T/CASUAL
Use this cycle to get low heat for wash°
able knit fabrics. The estimated drying
time is 36 minutes,
ULTRA DELBCATE
Use this cycle to get extra low heat for
drying heat-sensitive fabrics. The
estimated drying time is 31 minutes.
EXPRESS DRY TM
Use this cycle to get 16 minutes of high
heat followed by a 7 minute Cool Down
period. Use for smaller loads or for loads
needed in a shorter time period.
AIR DRY
Use this cycle to tumble heat sensitive
fabrics without heat. The preset time is
30 minutes (see page 33).
CUSTOM SET
iteJ_,,,mJ,_a=;,%Ni[_ 1["
CUSTOM SET allows you to select the
cycle, options and modifiers you use
most frequently and store them in
memory for future use by pressing
just two pads: CUSTOM SET and
START.
To custom set a cycle:
STEP 1. Select Cycle.
STEP 2. Select the desired Options.
STEP 3. Select the desired Modifiers.
STEP 4. Press and hold CUSTOM SET
until a beep sounds (approximately 3
seconds).
STEP 5. Press START.
The Custom Set cycle is now stored for
future use. To reuse, select CUSTOM
SET and press START.
TOUCN UP
Use this cycle to smooth cleaned, wrin-
kled synthetic and permanent press
clothes that have been packed or stored
(see page 35).
32
Loading ...
Loading ...
Loading ...