Loading ...
Loading ...
Loading ...
OPERATING INSTRUCTIONS (cont.)
6. The coffee dispensing amount of small cup and big cup can be adjusted:
a) Hold and press the small cup button for about 3 seconds, and then its corresponding indicator will
start to flash while the indicator of the large cup button turns off.
b) At that time, release the small cup button. Then press the small cup button again, the coffee
maker will start to brew coffee, after a while the coffee will flow out.
c) When you get your desired amount of coffee, press the small cup button again The coffee maker
will stop working and save the selected coffee dispensing amount of small cup.
d) When you press the small cup button again, the coffee maker will dispense the selected coffee
amount.
e) You can follow the above operations to adjust the coffee dispensing amount of the big cup.
NOTES
- The coffee dispensing amount of small cup & big cup can be only adjusted after preheat-
ing is finished.
- Coffee dispensing amount of small cup is ranged between 25ml and 45ml while the coffee
dispensing amount of big cup is ranged between 55ml and 85ml.
- The appliance will enter into the standby mode and both the indicators will be extinguished
if there is no any operation within 4 minutes.
- During brewing process, you can cancel the coffee brewing process by pressing your
selected coffee button once. To restart the brewing process, press the button again.
7. Press the big cup or small cup coffee button according to your demand, and then its
corresponding indicator starts to flash in blue. After a while, coffee will flow out from the coffee
outlet. Once the desired quantity has been reached, the coffee will stop flowing out
automatically and the corresponding indicator of your selected coffee button will light steadily.
8. During brewing process, both the indicators of big cup & small cup coffee buttons will flash quick-
ly if there is lack of water in the water tank. At that time, you must refill the water tank. Before refill-
ing, please firstly press the Power switch to “O” position and then remove the water tank to refill.
After refilling it, replace the water tank and make sure that it is placed in position. And then press
down the Power Switch to “I” position and you can continue to brew coffee.
9. Once you have finished brewing coffee, always expel the capsule. Capsules are automatically
expelled into the capsule collection tray by opening the handle.
CAUTION: Never open the handle during brewing cycles.
NOTE: The appliance will enter into the standby mode and both the indicators will be extin-
guished if there is no any operation within 4 minutes after the appliance finishes brewing
coffee. If you want to brew coffee again, firstly, make sure that the plug is connected well
with the power source and the Power Switch is at “I” position, and then press any button.
The appliance will then continue to brew coffee.
10. If you want to make another cup, insert a new capsule and repeat the previous steps.
11. Empty the capsule collection tray and rinse the unit and tank frequently.
12. Always turn the coffee maker off and disconnect the power supply when not use.
5
IMPORTANT SAFEGUARDS (cont.)
OPERATING INSTRUCTIONS
FIRST USE
Check that all accessories are complete and the unit is not damaged. Add water into water tank,
make sure the handle is closed in place. Place a container on the cup holder grid, insert the plug,
press the power switch to “I” position and the indicators of big cup and small cup coffee buttons start
to flash. Wait until the indicator lights stop-flashing, then press the big cup or small cup coffee
button. The water will start to flow out from the coffee outlet. Once the desired quantity has
been reached, the water will stop flowing out. Discard the water and clean all detachable parts
thoroughly with warm water.
NOTE: While pressing down the big cup or small cup coffee button, the machine may pro-
duce a pumping sound, this is normal. The sound tells you that water is pumped for brew-
ing coffee.
USING YOUR COFFEE MAKER
1. Fill the detachable water tank with drinking water. The water level should not exceed MAX level
marked on the tank.
2. Open the handle by lifting it and insert a coffee capsule. Close the handle by pushing it down
directly.
CAUTION: Use Nespresso®* original line and Barsetto® capsules only for the appliance.
3. Plug the power cord into the outlet. Press the power switch to “I” position and then both the
indicators of big cup and small cup coffee buttons will start to flash, this signals the water is being
heated.
CAUTION: Never open the handle during brewing cycle, the coffee capsule will be expelled
into the capsule collection tray.
4. Position a container on the cup holder grid. Make sure the drip tray is assembled in place.
5. Once the indicators of big cup & small cup coffee buttons light steadily, the coffee maker has
finished preheating. You can start to brew coffee under the default setting. The default coffee
dispensing amount is 35ml (1.23 fl. oz.) for small cup and 70ml (2.47 fl. oz) for large cup.
Notes on the cord plug
This appliance has a polarized plug. To reduce the risk of electric shock, this plug is intended to fit
into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
Use of extension cords
Because of potential safety hazards under certain conditions, we strongly recommend against the use
of an extension cord. However, if you must use an extension cord, it is absolutely necessary that it is
a UL-listed (in the United States) or a CSA-listed (in Canada), 3-wire grounding type appliance exten-
sion cord having a grounding type plug and outlet, and that the electrical rating of the cord is 15
amperes (minimum) and 120 volts.
4
Loading ...
Loading ...
Loading ...