Loading ...
Loading ...
Loading ...
Hantek 6000BC/Hantek 6000BD/Hantek 6000BE
Digital Oscilloscope
USER’S MANUAL 21
2.1 The User’s Interface
Click the software icon on the desk after you finished the software setting and equipment
connecting. Then a user interface will be showed as follows:
In addition to displaying waveforms, the display area is filled with many details about the
waveform and the oscilloscope control settings.
1. The Main Menu: All settings can be found in the main menu.
2. The Toolbar
3. Displays the trigger information: Displays the edge trigger slope, source and level.
4. The DDS Panel (HANTEK 6000BD)
5. The Horizontal Panel: The user can change Time/Div, format in the panel.
6. The Vertical Panel: The user can turn on/off the CH1/CH2/CH3/CH4. Also the user
can change the CH1/ CH2/CH3/CH4 volt/div, coupling and probe attenuation.
7. The Trigger Panel: In this panel, the user can change the trigger mode, sweep, source
and slope.
8. Displays the system time.
9. Marker shows Edge trigger level
10. Displays the main time base setting.
Loading ...
Loading ...
Loading ...