Loading ...
Loading ...
Loading ...
returned to an authorised service agent for repair or replacement in
order to avoid hazard.
• The power cable must not be replaced by the user as this requires the
use of special tools. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
• If the kettle is overfilled, boiling water may overflow.
Materials and accessories coming into contact with food conform to EC
regulation 1935/2004.
Service and Customer Care
• If the cord is damaged it must, for safety reasons, be repaired by
De’Longhi or an authorised De’Longhi service agent.
• Please refer to the enclosed guarantee leaflet for service and assis-
tance details.
Electrical Requirements
The flexible mains lead is supplied connected to a B.S. 1363 fused plug
having a fuse of 13 amp capacity.Should this plug not fit the socket outlets
in your home, it should be cut off and replaced with a suitable plug,
following the procedure outlined below. Note: Such a plug cannot be used
for any other appliance and should therefore be properly disposed of,
(having removed the fuse) and not left where children might find it and
plug it into a supply socket - with the obvious consequent danger. If the
plug is a moulded-on type the fuse cover must be refitted. If the fuse cover
is lost, the plug must not be used until a replacement cover is obtained.
The colour of the correct replacement fuse cover is that of the coloured
insert in the base of the fuse recess or elsewhere on the plug. Always state
this colour when ordering a replacement fuse cover. N.B. We recommend
the use of good quality plugs and wall sockets that can be switched off
when the machine is not in use. important: the wires in the mains lead
fitted to this appliance are coloured in accordance with the following code:
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the
terminal in the plug which is marked with the letter E or by the earth
symbol or coloured green or green and yellow. The wire which is
coloured blue must be connected to the terminal which is marked with
the letter N or coloured black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter L or coloured
red. When wiring the plug, ensure that all strands of wire are securely
retained in each terminal. Do not forget to tighten the mains lead clamp
on the plug. If your electricity supply point has only two pin socket outlets,
or if you are in doubt, consult a qualified electrician. Should the mains lead
ever require replacement, it is essential that this operation be carried out
by a qualified electrician and should only be replaced with a flexible cord
of the same size. Only 13amp replacement fuses which are asta approved
to B.S. 1362 should be fitted. This appliance conforms to the Norms EN
55014 regarding the suppression of radio interference.
Green and Yellow to
Earth
Blue to
Neutral
13 amp Fuse
Brown to
Live
Cord Clamp
Warning
this appliance must be earthed
GREEN AND YELLOW BLUE BROWN
EARTH NEUTRAL LIVE
KBO 3001
4
Loading ...
Loading ...
Loading ...