Loading ...
Loading ...
Loading ...
● Power Saving
Leaving the watch in a dark location for about
one hour between the hours of 10 p.m. and
5:50 a.m. will cause the second hand to stop,
and the watch to enter Level 1 power saving.
If the watch is left in this condition for six or
seven days, all hands will stop and the watch
will enter Level 2 power saving.
Level 1 :
Basic timekeeping functions are operational.
Level 2 :
Only the day indicator is operational.
Note
●
Note that the watch also may enter the
power saving state if its face is blocked
from light by your sleeve while you are
wearing it.
●
The watch will enter power saving from
the Timekeeping Mode only.
● Recovering from Power Saving
Operation
Press any button, perform a crown operation,
or place the watch in a well-lit area to recover
from power saving.
Connecting with a Phone
To connect the watch with a phone, first install
the CASIO “G-SHOCK Connected” app on the
phone and then use Bluetooth to pair the
watch with the phone.
●
A
Install the app on your phone.
In Google Play or the App Store, search for the
CASIO “G-SHOCK Connected” app and
install it on your phone.
●
B
Configure Bluetooth settings.
Enable the phone’s Bluetooth.
Note
●
For details about setting procedures,
see your phone documentation.
●
C
Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1. Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y
Tap the “G-SHOCK Connected” icon.
3.
X
Hold down (C) for about four seconds
until the second hand points to
e
.
4.
Y
Perform the operation shown on the
screen of the phone to be paired with.
●
When a connection is established
between the watch and phone, the
second hand moves to
e
.
●
If pairing fails for some reason, perform
the procedure again from step 1.
Bluetooth mark
Note
●
The first time you start up G-SHOCK
Connected, a message will appear on
your phone asking if you want to
enable location information
acquisition. Configure settings to allow
background use of location
information.
Adjusting the Time
Setting
Your watch can receive time signals and
connect with a phone to obtain information
that it uses to adjust its date and time setting.
Important!
●
Disable auto time adjustment
whenever you are inside an aircraft or
in any other area where radio wave
reception is prohibited or restricted.
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to
Configure Settings
Connecting with a Phone to
Adjust the Watch’s Time
You can configure watch settings to connect
with a phone at preset times each day and
adjust its time settings in accordance with
information obtained from an online time
server.
● Using This Function
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave your watch in the Timekeeping Mode, it
will perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
12:30
Important!
●
The watch may not be able to perform
auto time adjustment under the
conditions described below.
ー
While the watch is too far away from
its paired phone
ー
While communication is not possible
due to radio interference, etc.
ー
While the phone is updating its
system
ー
While G-SHOCK Connected is not
running on the phone
Operation Guide 5544
5
Loading ...
Loading ...
Loading ...