Frigidaire FGSS2335TF3 Official Side-by-side Refrigerator User Manual

TABLE OF CONTENTS

www.frigidaire.com USA 1-800-944-9044 www.frigidaire.ca Canada 1-800-265-8352

All about the

Use & Care

of your Refrigerator

A14788801 (July 2018)

Important Safety Instructions ......................2

Features At A Glance - Baseline Model .........4

Features At A Glance - Gallery/Pro Model .....5

Installation ................................................6

Door Removal Instructions ..........................8

Handle Installation ...................................10

Connecting the Water Supply ....................11

Controls - Frigidaire Gallery ....................... 13

Controls - Frigidaire Professional ...............16

Storage Features ...................................... 19

Automatic Ice & Water Dispenser -

Frigidaire Gallery (some models) ...............20

Automatic Ice & Water Dispenser -

Frigidaire Gallery/Pro (some models) .........23

Changing the Filter - Frigidaire Gallery .......26

Changing the Filter - Frigidaire Pro ............28

Normal Operating Sounds and Sights ......... 29

Care & Cleaning .......................................30

Before You Call ........................................34

Major Appliance Warranty .........................39

WARNING

WARNING indicates a potentially hazardous

situation which, if not avoided, could result

in death or serious injury.

IMPORTANT

IMPORTANT indicates installation, operation

or maintenance information which is impor-

tant but not hazard-related.

DANGER

DANGER indicates an imminently hazardous

situation which, if not avoided, will result in

death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injury.

Doors

 Handles are secure and tight

 Door seals completely to cabinet on all

sides

 Freezer door is level across the top

Leveling

 Refrigerator is level, side-to-side and

tilted ¼” (6mm) front-to-back

 Toe grille is properly attached to

refrigerator

 Cabinet is setting solid on all corners

Electrical Power

 House power turned on

 Refrigerator plugged in

Ice Maker

 House water supply connected to

refrigerator

 No water leaks present at all connections

- recheck in 24 hours

 Ice maker is turned ON

 Ice & water dispenser operates correctly

 Frontltermustbeushwithlter

housing (select models)

Final Checks

 Shipping material removed

 Fresh food and freezer temperatures set

 Crisper humidity controls set

 Registration card sent in

Installation Checklist

Denitions

This is the safety alert symbol. It is

used to alert you to potential personal injury

hazards. Obey all safety messages that follow

this symbol to avoid possible injury or death.

For your Safety

• DO NOT store or use gasoline, or other

ammableliquidsinthevicinityofthisor

any other appliance. Read product labels for

warningsregardingammabilityandother

hazards.

• DO NOT operate the refrigerator in the

presence of explosive fumes.

• Avoid contact with any moving parts of

automatic ice maker.

• Remove all staples from the carton. Staples

can cause severe cuts, and also destroy

nishesiftheycomeincontactwithother

appliances or furniture.

WARNING

Please read all instructions before using this

refrigerator.

Child Safety

Destroy or recycle the carton, plastic bags, and

any exterior wrapping material immediately

after the refrigerator is unpacked. Children

should NEVER use these items to play.

Cartons covered with rugs, bedspreads, plastic

sheets or stretch wrap may become airtight

chambers,andcanquicklycausesuocation.

Proper Disposal of your

Refrigerator or Freezer

Risk of child entrapment

Childentrapmentandsuocationarenot

problems of the past. Junked or abandoned

refrigerators or freezers are still dangerous

– even if they will sit for “just a few days”. If

IMPORTANT SAFETY INSTRUCTIONS

Grounding type wall receptacle

Do not, under any

circumstances,

cut, remove, or

bypass the

grounding prong.

Power cord with

3-prong gounded plug

Electrical information

• The refrigerator must be plugged into

its own dedicated 115 Volt, 60 Hz.,

15 Amp, AC only electrical outlet. The

powercordoftheapplianceisequipped

with a three-prong grounding plug for your

protection against electrical shock hazards.

It must be plugged directly into a properly

grounded three prong receptacle. The

receptacle must be installed in accordance

with local codes and ordinances. Consult

aqualiedelectrician.Avoidconnecting

WARNING

These guidelines must be followed to ensure

that safety mechanisms in this refrigerator

will operate properly.

IMPORTANT

Pressing and holding the On/O button for

three seconds, located on the temperature

control panel (Electronic controls), or turn-

ing the Freezer and Fresh Food controls to

“0” (Mechanical controls) will disable your

refrigerator’s cooling system, but does not

disconnect the power to the light bulb and

otherelectricalcomponents.Toturno

power to your refrigerator you must unplug

the power cord from the electrical outlet.

CAUTION

To avoid personal injury or property

damage, handle tempered glass shelves

carefully. Shelves may break suddenly if

nicked, scratched, or exposed to sudden

temperature change.

refrigerator to a Ground Fault Interrupter

(GFI) circuit. Do not use an extension

cord or adapter plug.

• If the power cord is damaged, it should be

replaced by an authorized service technician

to prevent any risk.

• Never unplug the refrigerator by pulling on

thepowercord.Alwaysgriptheplugrmly,

and pull straight out from the receptacle to

prevent damaging the power cord.

• Unplug the refrigerator before cleaning and before

replacing a light bulb to avoid electrical shock.

• Performancemaybeaectedifthevoltage

varies by 10% or more. Operating the

refrigeratorwithinsucientpowercan

damage the compressor. Such damage is

not covered under your warranty.

• Do not plug the unit into an electrical outlet

controlled by a wall switch or pull cord to prevent

therefrigeratorfrombeingturnedoaccidentally.

you are getting rid of your old refrigerator or

freezer, please follow the instructions below to

help prevent accidents.

Proper Disposal of Refrigerators/Freezers

We strongly encourage responsible appliance

recycling/disposal methods. Check with your utility

company or visit www.energystar.gov/recycle for

more information on recycling your old refrigerator.

Before you throw away your old

refrigerator/freezer:

• Remove doors.

• Leave shelves in

place so children

may not easily

climb inside.

• Have refrigerant

removed by a

qualiedservice

technician.

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT

CFC/HCFC Disposal

Your old refrigerator may have a cooling system

thatusedCFCsorHCFCs(chlorouorocarbons

orhydrochlorouorocarbons).CFCsandHCFCs

are believed to harm stratospheric ozone if

released to the atmosphere. Other refrigerants

may also cause harm to the environment if

released to the atmosphere.

If you are throwing away your old refrigera-

tor, make sure the refrigerant is removed for

properdisposalbyaqualiedtechnician.If

you intentionally release refrigerant, you may

besubjecttonesandimprisonmentunder

provisions of environmental legislation.

IMPORTANT

Features not included with your refrigerator can be purchased at

www.frigidaire.com or by calling 1-800-944-9044.

FEATURES AT A GLANCE - BASELINE MODEL

Features may vary according to model

CAUTION:

Do Not Remove

Magnet Behind

Dairy

Compartment

Dairy

Compartment

Glass Shelf

Door Bin

Crisper Pan

and Cover

Fixed

Door Bin

Toe Grille

Door Bin

Ice

Container

Shelf

Water Filter

(Location varies by model)

Ice Cream Shelf

Ice Maker

Door Bins

Fixed

Door Bin

Slide Out Basket

Door Bin

Glass Shelf

Glass Shelves

LED Lights

FEATURES AT A GLANCE - GALLERY/PRO MODEL

IMPORTANT

Features not included with your refrigerator can be purchased at

www.frigidaire.com or by calling 1-800-944-9044.

Features may vary according to model

Shelves

Tinted

Door Bin

Slim Ice Maker

Pizza Shelf

Air Filter

Water Filter

Tinted Dairy

Compartment

Tinted

Door Bin

Shelves

Tinted Chill

Drawer

Tinted

Door Bin

Can Rack

Tinted Crisper

Pan

Tinted

Door Bin

Toe Grille

Tinted

Door Bin

Large

Glide Out

Basket

Tinted

Door Bin

Large

Basket

Tinted

Door Bin

Tinted

Door Bin

Tinted Deli

Drawer



NOTE

If your refrigerator is placed with the door

hinge side against a wall, you may have to

allow additional space so the door can be

opened wider.

INSTALLATION

CAUTION

Do Not install the refrigerator where the

temperature will drop below 55°F (13°C) or

rise above 110°F (43°C). The compressor

will not be able to maintain proper

temperatures inside the refrigerator.

Do Not block the toe grille on the lower front

ofyourrefrigerator.Sucientaircirculation

is essential for the proper operation of your

refrigerator.

This Use & Care Guide provides general

operating instructions for your model. Use

the refrigerator only as instructed in this

Use & Care Guide. Before starting the

refrigerator, follow these important rst

steps.

Location

• Choose a place that is near a grounded

electrical outlet. Do Not use an extension

cord or an adapter plug.

• If possible, place the refrigerator out of

direct sunlight and away from the range,

dishwasher or other heat sources.

• Therefrigeratormustbeinstalledonaoor

that is level and strong enough to support a

fully loaded refrigerator.

• Consider water supply availability for models

equippedwithanautomaticicemaker.If

you do not hook up water to the refrigerator,

remembertoturntheicemakero.

Installation

Installation clearances

Allow the following clearances for ease

of installation, proper air circulation, and

plumbing and electrical connections:

 Sides&Top ⅜inch

Back 1 inch

Toe Grille Installation and

Removal

To install toe grille

1 Open both doors. Slide left and right

sides of toe grille over lower hinges of

refrigerator.

 2 Whilepushingtoegrillermlyagainst

cabinet, fasten bottom clips of toe grille to

cabinet.

3 Fasten top clips to cabinet.

4 Close the doors. Fasten right and left side

clips into groove of bottom hinge.

To remove toe grille

1 With both doors closed, unfasten right

and left side clips of toe grille from bottom

hinge groove.

 2 Openbothdoors.Pressrmlyontopof

toegrilleuntiltopoftoegrillepopso.

3 Pull toe grille outward toward your body

andooflowerhinges.

Installing Toe Grille

Removing Toe Grille

INSTALLATION



NOTE

The refrigerator doors are designed to shut

by themselves within a 20 degree opening.

Raise

Door Opening

Your refrigerator should be positioned to

allow easy access to a counter or table when

removing food. For best use of drawers and

freezer baskets, the refrigerator should be

in a position where both the refrigerator and

freezer doors can be fully opened.

Guidelines for nal positioning of your

refrigerator:

• All four corners of the cabinet must rest

rmlyontheoor.

• The cabinet should be level at the front and

rear.

• The sides should tilt ¼ inch (6 mm) from

front to back (to ensure that doors close and

seal properly).

• Doors should align with each other and be

level.

All of these conditions can be met by

raising or lowering the adjustable front

rollers.

To level the cabinet using the front

rollers:

1 Open both doors and remove the toe

grille (see “Toe Grille Installation and

Removal” in the “Installation” section).

 2 Closethedoorsanduseaat-blade

screwdriveror⅜inchsocketwrenchto

raise or lower the front rollers.

3 Ensure both doors are bind-free with their

seals touching the cabinet on all four

sides.

Set Screw

(some models)

Hinge

Hinge Flange

Open Door

7/16" Wrench and

3/32" Hex Key (some models)

Door Stop

Flange

 6 Replacethetoegrillebyttingitinto

place (see “Toe Grille Installation and

Removal” in the “Installation” section).

Raise

Door

Raise

Door

Door Door

To level the doors using the adjustable

lower hinge (some models):

1 Before leveling either door, remove set

screw that locks door height into position.

(The door cannot be adjusted without set

screw removed).

2 If the refrigerator door is lower than the

freezer door, raise the refrigerator door by

turning the adjustment screw clockwise

using a

inch wrench. (See illustration.)

3 If the freezer door is lower than the

refrigerator door, raise the freezer door by

turning the adjustment screw clockwise

using a

inch wrench. (See illustration.)

4 After leveling, verify door stop contacts

lower hinge and top of door does

not contact upper hinge through full

movement of door (from fully closed to

fully open).

5 Reinstall set screw, locking the door

height.

DOOR REMOVAL INSTRUCTIONS

To prepare for removing the doors:

1 Make sure the electrical power cord is

unplugged from the wall outlet.

2 Open both doors and remove the toe

grille (as explained in the Installation

Instructions that came with your

appliance).

3 Remove any food from the door shelves.

4 Close the doors.

To remove the refrigerator top hinge

cover:

1 Remove the three screws from each cover

over the top door hinges.

 2 Lifthingecoverstraightupando.

To remove the refrigerator door:

1 Trace lightly around the door’s top hinge

with a pencil. This makes reinstallation

easier.

Rear Cover

Screw

Front Cover

Screws

Top

Hinge

Cover

Hinge

Screws

Top

Hinge

Phillips™

Head

Tools Necessary:

Socket

Wrench Set

Adjustable

Wrench

3/8" Fixed

Wrench

Top

Hinge

Screw

Bottom

Hinge

Screw

Top Hinge

Cover Front

Screw

Top Hinge

Cover Rear

Screw

2 Remove the two screws from the top

hinge.Liftthedooroofthebottom

hinge and set it aside.

To remove the freezer top hinge cover:

1 Remove the two screws from each cover

over the top door hinges.

 2 Lifthingecoverstraightupando.

Front

Cover Screws

Rear Cover

Screw

Top Hinge

Cover

Hinge

Screws

Multi-Wire

Cable

Top

Hinge

To remove the freezer door:

1 Detach the

multi-wire

cable

connector

located

above the

top hinge.

Grasp both

sides of the

connector

rmlyand

pull apart.

2 Trace lightly around the hinge with a

pencil. This makes reinstallation easier.

3 Detach the water tube from the connector

located below the freezer door. The

Door

Hinge

Assembly Screws

Water

Line

Tubing

Non-Adjusting Hinge (some models)

Closer

Hinge

Door

Water

Line

Tubing

Screws

Hinge

Assembly

Adjustable Hinge (some models)

connector releases when you press its

outer sleeve inward.

4 Remove the screws from the top hinge

and pull the multi-wire cable through it.

Liftthedooroofthebottomhinge.

5 Remove the two bottom hinge screws and

hinge if necessary.

DOOR REMOVAL INSTRUCTIONS

Adjustable Hinge (some models)

Door

Hinge

Assembly

Closer

Hinge

Screws

3 Remove the two bottom hinge screws and

hinge if necessary.

CAUTION

Be sure doors are set aside in a secure position

where they cannot fall and cause personal injury.

To reinstall the refrigerator door, reverse the

above steps.

To Disconnect

1. Press outer ring against face of

fitting

2. Pull to

remove tube

Insert tube and push until mark

touches face of fitting

To Connect

6 Lay the door on its side to avoid damage to the

water tube extending from the bottom hinge.

To reinstall the freezer door, reverse the above steps.

HANDLE INSTALLATION

IMPORTANT

To ensure proper installation of

handles, please review these instruc-

tions and illustrations thoroughly prior

to installing the handles.

CAUTION

Wear gloves and safety goggles and

use extreme CAUTION when installing

these handles. The rounded end of the

handles may be sharp (some models).

Ensure Handle Set Screws

are Facing Each Other

with Doors Closed

1 Remove handles from protective

packaging.

2 Position freezer handle end caps

over upper and lower pre-installed

shoulder bolts (A) that are fastened

into door, ensuring the holes for the

set screws are facing towards the

refrigerator door.

 3 Whileholdinghandlermlyagainst

door, fasten furthermost upper and

furthermost lower Allen set screws

(B) with supplied Allen wrench.

4 Firmly tighten the inside Allen set

screws.

5 Repeat steps 2 through 4 to install

refrigerator handle. Ensure the holes

for the set screws are facing towards

the freezer door.



NOTE

All set screws should be tightened

andsub-ush(Allensetscrewshould

be seated just below the surface of

the end cap) of handle end cap. The

end caps should be drawn tight to

freezer and refrigerator doors with

no gaps.

Freezer Upper

End Cap

Refrigerator Upper

End Cap

Frigidaire Gallery

Refrigerator Lower

End Cap

Freezer Lower

End Cap

Freezer Upper

End Cap

Refrigerator Lower

End Cap

Refrigerator Upper

End Cap

Freezer Lower

End Cap

Frigidaire Professional

WARNING

To avoid electric shock, which can cause

death or severe personal injury, disconnect

the refrigerator from electrical power before

connecting a water supply line to the

refrigerator.



NOTE

Check with your local building authority

for recommendations on water lines and

associated materials prior to installing your

new refrigerator. Depending on your local/

state building codes, Frigidaire recom-

mends for homes with existing valves its

Smart Choice

water line kit 5304490728

(with a 6 ft. Stainless Steel Water Line) or

5304493869 (with a 6 ft. Polyline Water

Line) and for homes without an existing

valve, Frigidaire recommends its Smart

Choice

water line kit 5304490717 (with

a 20 ft. copper water line with self-tapping

saddle valve). Please refer to www.frigid-

aire.com/store for more information.

CAUTION

To Avoid Property Damage:

• Copper or Stainless Steel braided tubing

is recommended for the water supply

line. Water supply tubing made of ¼

inch plastic is not recommended to be

used. Plastic tubing greatly increases

the potential for water leaks, and the

manufacturer will not be responsible for

any damage if plastic tubing is used for

the supply line.

• DO NOT install water supply tubing in

areas where temperatures fall below

freezing.

• Chemicals from a malfunctioning softener

can damage the ice maker. If the ice

maker is connected to soft water, ensure

that the softener is maintained and

working properly.

IMPORTANT

Ensure that your water supply line connec-

tions comply with all local plumbing codes.

CONNECTING THE WATER SUPPLY

Before Installing The Water Supply Line,

You Will Need:

• BasicTools:adjustablewrench,at-blade

screwdriver, and Phillips

screwdriver

• Access to a household cold water line with

water pressure between 30 and 100 psi.

• A water supply line made of ¼ inch

(6.4 mm) OD, copper or stainless steel

tubing. To determine the length of tubing

needed, measure the distance from the

ice maker inlet valve at the back of the

refrigerator to your cold water pipe. Then

add approximately 7 feet (2.1 meters),

so the refrigerator can be moved out for

cleaning (as shown).

To Connect Water Supply Line To Ice

Maker Inlet Valve

1 Disconnect refrigerator from electric

power source.

2 Place end of water supply line into sink or

bucket.TurnONwatersupplyandush

supply line until water is clear. Turn OFF

watersupplyatshutovalve.

3 Remove plastic cap from water valve inlet

and discard cap.

4 If you use copper tubing - Slide brass

compression nut, then ferrule (sleeve)

onto water supply line. Push water supply

line into water valve inlet as far as it

will go (¼ inch/6.4 mm). Slide ferrule

(sleeve)intovalveinletandngertighten

compression nut onto valve. Tighten

another half turn with a wrench; DO NOT

over tighten. See Figure 1.

If you use stainless steel or polyline

tubing - The nut and ferrule are

already assembled on the tubing. Slide

compression nut onto valve inlet and

ngertightencompressionnutontovalve.

Tighten another half turn with a wrench;

DO NOT over tighten. See Figure 2.

• Ashutovalvetoconnectthewatersupply

line to your household water system. Do not

useaself-piercingtypeshutovalve.

• Donotre-usecompressionttingoruse

thread seal tape.

• A compression nut and ferrule (sleeve) for

connecting a copper water supply line to the

ice maker inlet valve.

IMPORTANT

After connecting the water supply, refer to

“How to Prime the Water Supply System”

for important information about priming an

empty water supply system.

To ensure that your water dispenser works

properly, the water supply system must be

completelylledwithwaterwhenyourre-

frigeratorisrstconnectedtothehousehold

water supply line.

Figure 2

Figure 1

Plastic Water

Tubing to Ice

Maker Fill

Tube

Steel

Clamp

Brass

Compression

Nut

Ferrule

(Sleeve)

Copper

water line

Water Valve

Bracket

Valve Inlet

Water Valve

Copper water line

from household

water supply

(Include enough tubing in loop to allow

moving refrigerator out for cleaning.)

CONNECTING THE WATER SUPPLY

5 With steel clamp and screw, secure water

supply line (copper tubing only) to rear

panel of refrigerator as shown.

6 Coil excess water supply line (copper

tubing only), about 2½ turns, behind

refrigerator as shown and arrange coils so

they do not vibrate or wear against any

other surface.

 7 TurnONwatersupplyatshutovalveand

tighten any connections that leak.

8 Reconnect refrigerator to electrical power

source.

9 To turn ice maker on, lower wire signal

arm (side mounted) or set the ice maker’s

On/Opowerswitchtothe“I”position

(rear mounted).

Steel

Clamp

Water Line

Water Valve

Bracket

Valve Inlet

Water Valve

Water line

from household water supply

Plastic Water Tubing

to Ice Maker

Fill Tube

(Include enough tubing in loop to allow

moving refrigerator out for cleaning.)

Enlarged view of user interface display menu (varies by model)

User Interface (varies by model)

CONTROLS - FRIGIDAIRE GALLERY

options

(∧ or ∨)

Used to enter and exit the

options menu and make

selections.

exit Toggles the options and run

modes.

control

locked

While in the locked state,

you will not be able to

change any settings on the

display nor dispense ice and

water. The “Control Locked”

indicatorwillashandan

audible warning tone is

played.

light Toggles dispenser light On

andO.

quick

freeze

on o

Activates a faster rate for

freezing food. Deactivates

after 12 hours.

quick ice

on o

Increases the production

of ice. Deactivates after 12

hours.

display

on o

Toggles the temperature

displaysOnandO.

refrigerator

temp

Allows the temperature

set-points to be adjusted.

Control temperatures range

from +33°F / +1°C to +47°F

/ +8°C.

freezer

temp

Allows the temperature

set-points to be adjusted.

Control temperatures range

from -6°F / -21°C to +6°F /

-15°C.

mode

°F °C

Toggles display from

Fahrenheit to Celsius.

power o Press and hold for three

secondstoturnothe

cooling system. It also turns

otheicemakerandall

dispenser functions. The

displaywillread“powero”.

water lter Displays the current status of

thewaterlter(Good,Order,

orReplace).Toresetthelter

status to “Good”, press and

hold the “set” key for three

seconds.

air lter Displays the current status of

theairlter(Good,Order,or

Replace).Toresetthelter

status to “Good”, press and

hold the “set” key for three

seconds.

default

settings

While in the default option,

press and hold the set key

for three seconds to reset all

refrigerator settings to their

factory default settings.

set (+ or -) Selects the current menu

selection option.

water Press the “water” key

to select water. A green

indicator light will be

illuminated above the active

feature.

cube Press the “cube” key to

select cubed ice. A green

indicator light will be

illuminated above the active

feature.

crush Press the “crush” key

to select crushed ice. A

green indicator light will be

illuminated above the active

feature.

Setting cooling temperatures



NOTE

Whenyourstpowerontherefrigerator,the

temperature displays 0°F and 37°F. After a

few seconds, both of the displays will switch

to “HI”. The displays will continue to show

“HI” for 20 minutes. After 20 minutes, the

High Temp alarm will sound and both dis-

plays will show the actual temperature.

1 Plus (+) and Minus (-) indicators are

located on the right side of the control

panel.

2 Press the + or - indicator to adjust the

temperature to the desired setting.

CONTROLS - FRIGIDAIRE GALLERY

Alarms Sabbath Mode

The Sabbath Mode is a feature that disables

portions of the refrigerator and its controls

in accordance with observance of the weekly

Sabbath and religious holidays within the

Orthodox Jewish community.

Sabbath Mode is turned ON and OFF by

pressing and holding both the “∨” and “+” for

veseconds.Thedisplayshows“Sb”whilein

Sabbath mode.

In the Sabbath Mode, the High Temp alarm

is active for health reasons. For example,

if the door is left ajar the High Temp alarm

is activated. The refrigerator will function

normally once the door is closed, without

any violation of the Sabbath/Holidays. The

High Temp alarm is permitted when cabinet

temperature is outside the safe zone for 20

minutes. The alarm silences itself after 10

minutes while the High Temp icon stays lit until

the Sabbath mode is exited.

For further assistance, guidelines for proper

usage and a complete list of models

with the Sabbath feature, please visit

the web at http:\\www.star-k.org.



NOTE

While in Sabbath Mode, neither the lights,

dispenser, nor the control panel will work

until Sabbath Mode is deactivated.

Refrigerator stays in Sabbath Mode after

power failure recovery. It must be deacti-

vated with the buttons on the control panel.



NOTE

Although you have entered the Sabbath

Mode, the ice maker will complete the cycle

it had already initiated. The ice cube com-

partment will remain cold and new ice cubes

can be made with standard trays.

Power

Failure

In the event of a power failure,

the power fail alert will be

illuminated. Press alarm reset to

acknowledge the alarm. Other

modesmaybeturnedountil

the alarm is acknowledged.

When the power fail alert is

acknowledged, the refrigerator

will resume normal operation.

The high temp alarm may

also be illuminated until a safe

operating range temperature

has been reached.

Freezer

Temp

If the freezer temperature

reaches 26°F or greater, the

alarm will sound and the

temperaturewillash.Youcan

disable the alarm by pressing

the set key but the “High Temp”

indicator will illuminate until the

temperature goes below 26°F.

Fresh Food

Temp

If the fresh food temperature

reaches 55°F or greater, the

alarm will sound and the

temperaturewillash.Youcan

disable the alarm by pressing

the set key but the “High Temp”

indicator will illuminate until the

temperature goes below 55°F.

Door Ajar If the freezer or fresh food

doors have been left open for

veminutesormore,analarm

will sound and the door ajar

indicator will illuminate on the

display. Press the set key to

reset any system alarms.

Flapper When “Cube” or “Crush” is

selected,iftheapper(orice

chute door) is being held open

by a jammed ice cube, an alarm

will sound for two minutes.

The alarm will reset after two

minutes or when the ice cube

is removed and the set key is

pressed to reset.

CONTROLS - FRIGIDAIRE GALLERY

User Interface In-Door Controls

(options may vary)

CONTROLS - FRIGIDAIRE PROFESSIONAL

POWER

ON-OFF

Press and hold for three seconds

toturnothecoolingsystem.It

alsoturnsotheicemakerandall

dispenser functions. The display will

read “OFF”.

DEFAULT

SETTINGS

Press and hold for three seconds to

reset all refrigerator settings to their

factory default settings.

ICE MAKER

ON-OFF

Press and hold for 3 seconds to

toggle the ice maker in the freezer

compartment “ON” or “OFF”.

POWERPLUS

FREEZE

Activates a faster rate for freezing

food and increases ice production

in the freezer. Deactivates after 12

hours.

AIR FILTER Displays the current status of the air

lter(GOOD, ORDER, or REPLACE).

Toresetthelterstatusto“GOOD”,

press and hold for three seconds.

WATER FILTER Displays the current status of the

waterlter(GOOD, ORDER, or

REPLACE).Toresetthelterstatus

to “GOOD”, press and hold for three

seconds.

REFRIGERATOR

TEMP

Allows the temperature set-

points to be adjusted. Press the

“-” or “+” indicator to adjust the

temperature to the desired setting.

Control temperatures range from

+33°F / +1°C to +43°F / +6°C.

FREEZER TEMP Allows the temperature set-

points to be adjusted. Press the

“-” or “+” indicator to adjust the

temperature to the desired setting.

Control temperatures range from

-6°F / -21°C to +4°F / -16°C.

Alarms

Power Failure

In the event of a power failure, the “POWER

FAIL” alert will be illuminated. Press “MUTE

ALARM” to acknowledge the alarm. Other

modesmaybeturnedountilthealarmis

acknowledged. While a “POWER FAIL” alert

is displayed on the control panel, the unit will

continue normal operation. The “POWER FAIL”

alert on the control panel will be removed once

the user acknowledges the power fail condition

by pressing “MUTE ALARM” or “DEFAULT

SETTINGS”.

Freezer Temp

If the freezer temperature reaches 26°F

or greater, the alarm will sound and the

temperaturewillashandthedispenser

control will display “HIGH TEMP DETECTED”.

You can disable the alarm by pressing “MUTE

ALARM” but the “HIGH TEMP DETECTED”

indicator will illuminate until the temperature

goes below 26°F.

Fresh Food Temp

If the fresh food temperature reaches 55°F

or greater, the alarm will sound and the

temperaturewillashandthedispenser

control will display “HIGH TEMP DETECTED”.

You can disable the alarm by pressing “MUTE

ALARM” but the “HIGH TEMP DETECTED”

indicator will illuminate until the temperature

goes below 55°F.

Door Ajar

If the freezer or fresh food doors have been

leftopenforveminutesormore,analarm

will sound and the door ajar indicator will

illuminate on the display. Press “MUTE ALARM”

to reset any system alarms.

Flapper

When “CUBES” or “CRUSHED” is selected,

iftheapper(oricechutedoor)isbeing

held open by a jammed ice cube, an alarm

will sound for two minutes and the current

selection will blink on the dispenser control.

The alarm will reset after two minutes or when

the ice cube is removed.

Dispenser Controls

(options may vary)

WATER Press the “WATER” key to

select water.

CUBES Press the “CUBES” key to

select cubed ice.

CRUSHED Press the “CRUSHED” key to

select crushed ice.

light Toggles dispenser light on

ando.

CONTROLS - FRIGIDAIRE PROFESSIONAL

Sabbath Mode

The Sabbath Mode is a feature that disables

portions of the refrigerator and its controls

in accordance with observance of the weekly

Sabbath and religious holidays within the

Orthodox Jewish community.

Sabbath Mode is turned ON and OFF by

simultaneously pressing and holding both

the freezer “-” and the refrigerator “+” for

veseconds.Thedisplayshows“Sb”whilein

Sabbath mode.

In the Sabbath Mode, the “HIGH TEMP” alarm

is active for health reasons. For example, if

the door is left ajar the “HIGH TEMP” alarm

is activated. The refrigerator will function

normally once the door is closed, without

any violation of the Sabbath/Holidays. The

“HIGH TEMP” alarm is permitted when cabinet

temperature is outside the safe zone for 20

minutes. The alarm silences itself after 10

minutes while the “HIGH TEMP” icon stays lit

until the Sabbath mode is exited.

For further assistance, guidelines for proper

usage and a complete list of models

with the Sabbath feature, please visit

the web at

http:\\www.star-k.org.



NOTE

While in Sabbath Mode, neither the lights,

dispenser, nor the control panel will work

until Sabbath Mode is deactivated.

Refrigerator stays in Sabbath Mode after

power failure recovery. It must be deacti-

vated with the buttons on the control panel.



NOTE

Although you have entered the Sabbath

Mode, the ice maker will complete the cycle

it had already initiated. The ice cube com-

partment will remain cold and new ice cubes

can be made with standard trays.

CONTROLS - FRIGIDAIRE PROFESSIONAL

CAUTION

To avoid personal injury or property damage,

handle tempered glass shelves carefully.

Shelves may break suddenly if nicked,

scratched, or exposed to sudden temperature

change. Allow the glass shelves to stabilize

to room temperature before cleaning. Do not

wash in dishwasher.

STORAGE FEATURES

Cantilever Glass Shelf

Cantilever Shelf Adjustment

Refrigerator

shelves are easily

adjusted to suit

individual needs.

Before adjusting

the shelves,

remove all food.

Cantilever shelves

are supported at

the back of the

refrigerator.

To adjust cantilever shelves:

1 Lift front edge up.

2 Pull shelf out.

Replace the shelf by inserting the hooks at rear

of the shelf into the wall bracket. Lower the shelf

into the desired slots and lock into position.

Door storage

Door bins and shelves are provided for

convenient storage of jars, bottles, and cans.

Frequentlyuseditemscanbequicklyselected.

Some models have door bins that can

accommodate gallon-sized plastic drink

containers and economy-sized jars and

containers. Some bins are adjustable for

maximum storage capacity.

The dairy compartment, which is warmer than

the general food storage section, is intended for

short term storage of cheese, spreads, or butter.

Crisper Humidity Control

Higher Humidity Lower Humidity



NOTE

Leafy vegetables keep best when stored

with the humidity control set on Higher

Humidity, or in a drawer without a Humid-

ity Control. This keeps incoming air to a

minimum and maintains maximum moisture

content.

Crisper Drawer

Crispers

Crispers allow you

theexibilitytostore

any manner of items

including fruits,

vegetables, nuts, etc.

Crispers do not feature

humidity controls.

Fresh Drawers with Humidity

Control (some models)

The fresh drawers, located under the bottom

refrigerator shelf, are designed for storing

fruits, vegetables, and other fresh produce.

The fresh drawers feature humidity control

which allows you to adjust the humidity within

the drawer. This can extend the life of fresh

vegetables that keep best in high humidity.

Wash items in clear water and remove excess

water before placing them in the crispers.

Items with strong odors or high moisture

content should be wrapped before storing.

Cool Drawer (some models)

SomemodelsareequippedwithaCoolDrawer

for storage of luncheon meats, spreads,

cheeses, and other deli items. This drawer

does not have a separate temperature control.

Chill Drawer (some models)

SomemodelsareequippedwithaChillDrawer.

Chill Drawer temperatures can be adjusted by

sliding the Chill Drawer Temperature Control

in either direction. Use this pan for short term

storage of bulk meat

items. If meats are to

be kept longer than

one or two days, they

should be frozen. The

ChillDrawerisxed

and cannot be moved

up or down. If fruits

or vegetables are to

be stored in the Chill

Drawer, set the Chill

Drawer Temperature

Control to a warmer

setting to prevent

freezing.

Colder

Warmer

Chill Drawer

with Temperature

Control

AUTOMATIC ICE & WATER DISPENSER -

FRIGIDAIRE GALLERY (SOME MODELS)

Priming the Water Supply

System

Your refrigerator’s water supply system

includes several tubing lines, an advanced

waterlter,andadistributionvalvebankto

ensure ample supply to the ice and water

dispenser at all times. This system needs to

becompletelylledwithwaterwhenrst

connected to an external supply line.

To prime the water supply system:

 1 Beginllingthesystembypressingand

holding a drinking glass against the water

dispenser paddle.

2 Keep the glass in this position until water

comes out of the dispenser. It may take

about 1½ minutes.

3 Continue dispensing water for about four

minutestoushthesystemandplumbing

connections of any impurities (stopping to

empty the glass as necessary).

Ice Maker Operation & Care

The ice maker, ice bin, and dispenser feeding

mechanism are located in the top of the

freezer compartment. After the refrigerator is

installed properly and has cooled for several

hours, the ice maker can produce ice within

24hours.Itcancompletelyllanicebinin

about two days.

Ice Production: What to Expect

How much ice will a side-mounted ice

maker produce in 24 hours?

A side mounted ice maker will produce 4 to

4.5 pounds of ice every 24 hours, depending

on usage conditions. Ice is produced at a rate

of 8 cubes every 75 to 90 minutes.

How much ice can be stored in the bin?

When completely full, the bin in standard

depth units will hold about 9.5 pounds of ice.

The bin in counter depth units will hold about

5.5 pounds of ice.

Using the Ice Maker after Installation

Beforemakingiceforthersttime,besure

to prime the water supply system. Air in new

plumbing lines can result in two or three empty

ice maker cycles. Furthermore, if the system

isnotushed,thersticecubesmaybe

discoloredorhaveanoddavor.



NOTE

The water dispenser has a built-in device

thatshutsothewaterowafterthreemin-

utesofcontinuoususe.Toresetthisshuto

device, simply release the dispenser paddle.

CAUTION

For proper dispenser operation,

recommended water supply pressure

should fall between 30 psi and 100 psi.

Excessivepressuremaycausewaterlterto

malfunction.



NOTE

Dispensed water is not chilled. For colder

water, add ice to cup or container before

dispensing water.

IMPORTANT

Your ice maker is shipped from the factory

with the wire signal arm in the ON position.

To ensure proper function of your ice maker,

hook up water supply immediately or turn

ice maker OFF by lifting the wire signal arm

until it clicks and locks in the UP position.

If the ice maker is not turned o and

the water supply is not connected, the

water valve will make a loud chatter-

ing noise.

Turning the SIDE MOUNTED Ice

Maker On and O

To begin ice production, lower the wire signal

arm to the DOWN or ON position. The ice

makerturnsoautomaticallywhentheice

container becomes full. To stop the ice maker,

raise the wire signal arm until it clicks and

locks in the UP or OFF position.

AUTOMATIC ICE & WATER DISPENSER -

FRIGIDAIRE GALLERY (SOME MODELS)

IMPORTANT

Small ice cubes or ice chips jamming in the

ice maker may be a sign that your water

lterneedschanging.Ifyouhaveaside

mounted ice maker you may also experi-

ence hollow cubes partially frozen cubes

with water inside. When these cubes are

harvested, they break open and spill water

over the other ice cubes in the ice container,

forming a solid mass of ice. As the water

lternearstheendofitsusefullifeandbe-

comes clogged with particles, less water is

delivered to the ice maker during each cycle.

Theicemakercan’tlleverycubeintheice

maker mold, leading to small cubes or chips

that can get caught between the ice ejector

blades and the stripper. Remember, if your

ice maker is jamming with small ice cubes or

it’s been six months or longer since you last

changedyourwaterlterreplacethewater

lterwithanewone.Poorqualityhousehold

watermayrequiretheltertobechanged

morefrequently.

Ice Maker/Dispenser Tips

• Ice cubes stored too long may develop

anoddavor.Emptytheicecontaineras

explained below.

• Occasionally shake the ice container to keep

ice separated.

• If your refrigerator is not connected to a

water supply or the water supply is turned

o,turnOtheicemaker.

• Ifyouneedalargequantityoficeatone

time, it is best to get cubes directly from the

ice container.

• The following sounds are normal when the

ice maker is operating:

- Motor running

- Ice dropping into ice container

- Water valve opening or closing

- Ice loosening from tray

- Running water

• When dispensing ice, you will hear a

snapping or clicking sound when the ice

chute opens and closes.

• To avoid splashing, dispense ice into your

containerbeforeaddingliquids.

• Itisnormalforicetolltothetopofthe

ice bin.

• TurnOtheicemakerwhencleaningthe

freezer and during vacations.

- If you turn O the ice maker for a

long period of time, you should also

turnothewatersupplyvalve.

CAUTION

Chemicals from a malfunctioning water

softener can damage the ice maker. If the

water supply to your refrigerator is softened,

be sure the softener is maintained to work

properly.

OFF

Wire

Signal Arm

Auger

CAUTION

NEVER use an ice pick or similar sharp

instrument to break up the ice. This could

damage the ice storage bin and dispenser

mechanism.

IMPORTANT

When removing or replacing the ice bin,

DO NOT rotate the auger in the ice bin. If

the auger is accidentally rotated, you must

realign the auger by turning it in 90 degree

turns(seebelow)untiltheicebintsinto

place with the drive mechanism. If the

auger is not properly aligned when re-

placing the ice bin, the refrigerator will only

dispense Crushed Ice. The freezer door may

also not close properly causing warm air to

leak into the freezer.

Cleaning the Ice Maker

Clean the ice maker and ice bin at regular

intervals, particularly before you take a

vacation or move.

To clean the ice maker:

1 Turn O the ice maker.

2 Remove the ice bin by lifting up and out.

3 Empty and carefully clean the ice bin with

mild detergent. Rinse with clear water. Do

not use harsh or abrasive cleaners.

4 Allow the ice bin to dry completely before

replacing in the freezer.

5 Remove ice chips and clean the ice bin

shelf and the freezer door chute.

6 Replace the ice bin. Turn On the ice maker

to resume ice production.

Remove and empty the ice storage bin if:

• An extended power failure (one hour or

longer) causes ice cubes in the ice storage

bin to melt and freeze together, jamming the

dispenser mechanism.

• Youdonotusetheicedispenserfrequently.

Ice cubes will freeze together in the bin,

jamming the dispenser mechanism.

Remove the ice storage bin and shake to

loosen the cubes or clean as explained above.

AUTOMATIC ICE & WATER DISPENSER -

FRIGIDAIRE GALLERY (SOME MODELS)

IMPORTANT

Turningotheicemakersimplydisables

ice making. You will still be able to dispense

existing ice, and you will still be able to

dispense water.

AUTOMATIC ICE & WATER DISPENSER -

FRIGIDAIRE GALLERY/PRO (SOME MODELS)



NOTE

The water dispenser has a built-in device

thatshutsothewaterowafterthreemin-

utesofcontinuoususe.Toresetthisshuto

device, simply release the dispenser paddle.



NOTE

The ice maker also has a built-in plastic

signal arm that automatically stops ice pro-

duction when the ice bin is full. This signal

arm should not be used to manually stop

the ice maker.

CAUTION

For proper dispenser operation,

recommended water supply pressure

should fall between 30 psi and 100 psi.

Excessive pressure may cause the system to

malfunction.

Priming the water supply system

Ice maker operation & care

After the refrigerator is installed properly and

has cooled for several hours, the ice maker can

produce ice within 24 hours. The ice maker will

lltheicebinfromtherear.Youmustdispense

some ice to force the ice forward in the bin.

Thiswillallowthebintollcompletely.

Ice Maker and Storage Bin

Capacity

This ice maker should produce 2.5 to 3 pounds

of ice per 24 hours, depending on usage

conditions. Ice is produced at a rate of 10

cubes every 75 to 90 minutes.

How much ice can be stored in

the ice bin?

When completely full, the bin in standard

depth units will hold about 11 pounds of ice

(total weight of ice and bin will be about 15

pounds). The bin in counter depth units will

hold about 8.5 pounds of ice (total weight of

ice and bin will be about 12 pounds).

Turning the ice maker on and o

Ice production is controlled by the ice maker’s

On/Ofeatureonthecontrolpanel.Pressing

andholdingtheOn/Obuttontogglestheice

makerOn/O.



NOTE

Dispensed water is not chilled. For colder

water, add ice to cup or container before

dispensing water.

 1 Beginllingthesystembypressingand

holding a drinking glass against the water

dispenser

paddle.

2 Keep the

glass

in this

position

until water

comes

out of the

dispenser.

It may

take

about 1½

minutes.

3 Continue

dispensing

waterforaboutfourminutestoushthe

system and plumbing connections of any

impurities (stopping to empty the glass as

necessary).

Dispenser

(varies by model)

Ice maker/dispenser tips

• If your refrigerator is not connected to a

water supply or the water supply is turned

o,turnotheicemakerasdescribedin

the previous section.

• The following sounds are normal when

the ice maker is operating:

- Motor running

- Ice dropping into ice bin

- Water valve opening or closing

- Running water

• When dispensing ice, you will hear a

snapping or clicking sound when the ice

chute opens and closes.

• Ifyouneedalargequantityoficeatone

time, it is best to get cubes directly from

the ice bin.

• Ice cubes stored too long may develop an

oddavor.Emptytheicebinasexplained

below.

• When dispensing cubed ice, it is normal

tohaveasmallquantityoflittlepieces

along with the whole cubes.

• To avoid splashing, dispense ice into your

containerbeforeaddingliquids.

• Itisnormalforicetolltothetopofthe

ice bin.

IMPORTANT

Your ice maker is turned on at the factory

so it can work as soon as you install your

refrigerator. If you cannot connect a water

supply,settheicemaker’sOn/Ofeature

toO;otherwise,theicemaker’sllvalve

may make a loud chattering noise when it

attempts to operate without water.

IMPORTANT

On occasion, unusually small ice cubes may

be noticed in the bucket or in dispensed ice.

This could occur in normal operation of the

ice maker. If you start seeing these more

frequently,itmaybeanindicationoflow

waterpressureorthewaterlterneedsto

bereplaced.Asthewaterlternearsthe

end of its useful life and becomes clogged

with particles, less water is delivered to the

ice maker during each cycle. Remember, if

it’s been six months or longer since you last

changedyourwaterlter,replacethewater

lterwithanewone.Poorqualityhousehold

watermayrequiretheltertobechanged

morefrequently.

Using the ice maker after

installation

Beforemakingiceforthersttime,besure

to prime the water supply system. Air in new

plumbing lines can result in two or three empty

ice maker cycles. Furthermore, if the system

isnotushed,thersticecubesmaybe

discoloredorhaveanoddavor.

AUTOMATIC ICE & WATER DISPENSER -

FRIGIDAIRE GALLERY/PRO (SOME MODELS)

CAUTION

If the water supply to your refrigerator is

softened, be sure the softener is properly

maintained. Chemicals from a water softener

can damage the ice maker.

CAUTION

Besuretormlysupporttheunderside

of the ice bin when removing it from the

refrigerator. A standard depth bin that is full

of ice will weigh about 15 pounds total, and

a counter depth bin that is full of ice will

weigh about 12 pounds total.

CAUTION

NEVER use an ice pick or similar sharp

instrument to break up the ice. This

could damage the ice bin and dispenser

mechanism.

To loosen stuck ice, use warm water.

Before replacing the ice bin, make sure it is

completely dry.

IMPORTANT

When removing or replacing the ice bin,

avoid rotating the auger in the ice bin. If

the auger is accidentally rotated, you must

realign the auger by turning it in 45 degree

turns(seebelow)untiltheicebintsinto

place with the drive mechanism. If the

auger is not properly aligned when replacing

the ice bin, the refrigerator will not dispense

ice. The freezer door also may not close

properly causing warm air to leak into the

freezer compartment.

AUTOMATIC ICE & WATER DISPENSER -

FRIGIDAIRE GALLERY/PRO (SOME MODELS)

Cleaning the storage bin

Clean the ice

maker and ice

bin at regular

intervals,

especially prior

to vacation or

moving.

 1 Turno

the ice

maker.

2 Remove

the ice

bin by

lifting up slightly on the front of the bin

and pulling it straight out of the ice maker

housing.

Removing Ice Bin

Adjusting Ice Bin Auger

Auger

3 Empty and carefully clean the ice bin

with mild detergent. Do not use harsh or

abrasive cleaners. Rinse with clear water.

4 Allow the ice bin to dry completely before

replacing in the freezer.

5 Remove ice chips and clean the ice bin

shelf and the freezer door chute.

6 Replace the ice bin. Turn the ice maker on

to resume ice production.

Remove and empty the ice bin if:

• An extended power failure (one hour

or longer) causes ice cubes in the ice

bin to melt and refreeze together after

power is restored, jamming the dispenser

mechanism.

• You do not use the ice dispenser

frequently.Icecubeswillfreezetogether

in the bin, jamming the dispenser

mechanism.

Remove the ice bin and shake to loosen the

cubes or clean as explained above.

CHANGING THE FILTER - FRIGIDAIRE GALLERY

Air Filter (some models)

Theairlterislocatedatthetopofthefresh

foodcompartmentnexttothewaterlter.

Replacing the Air Filter

Ingeneral,youshouldchangetheairlter

everysixmonths(thelterstatuslighton

the control panel prompts you to replace

thelteraftersixmonths)toensureoptimal

lteringofrefrigeratorodors.Youmaywant

to adjust this time period depending on the

types and amounts of food you typically

store in your refrigerator. To replace your

PureSource Ultra

airlter:

 1 Pulltheairlterhousingstraightout.

 2 Removetheoldlteranddiscardit.

 3 Unpackthenewlterandplaceitinside

the housing.

4 Slide the housing back into position.

Air Filter

Locating the Filter

Yourrefrigeratorisequippedwithawater

lteringsystem.Thewaterltersystemlters

all dispensed drinking water, as well as the

water used to produce ice.

Ordering Replacement Filters

Toorderyourreplacementlters,pleasevisit

our online store at www.frigidaire.com/store,

by calling toll-free at 877-808-4195, or by

visiting the dealer where you purchased your

refrigerator. Frigidaire recommends that you

orderextralterswhenyourstinstallyour

refrigerator,andthatyoureplaceyourltersat

least once every six months.

Herearetheproductnumberstorequestwhen

ordering:

PureSource Ultra

Water Filter

Part# ULTRAWF

Water Filter

Thewaterlterislocatedatthetoprightside

of the fresh food compartment.

Replacing the Water Filter

In general, you should change the water

ltereverysixmonthstoensurethe

highestpossiblewaterquality.Water

Filter Status on the user interface prompts

youtoreplacethelterafterastandard

amount of water (200 gallons/757 liters for

PureSource Ultra

)hasowedthroughthe

system.

If your refrigerator has not been used for a

period of time (during moving for example),

changethelterbeforereinstallingthe

refrigerator.

Filter Cartridge

Do not use with water that is microbiologically

unsafeorofunknownqualitywithoutadequate

disinfection before or after the system.

Systemscertiedforcystreductionmaybe

used on disinfected waters that may contain

lterablecysts.

Test & certication results:

• Rated Capacity - 200 gallons/757 liters for

PureSource Ultra

iceandwaterlter

• Ratedserviceow-.50gallonsperminute

• Operating Temp.: Min. 33°F, Max. 100°F

• Maximum Rated Pressure - 100 pounds per

squareinch

• Recommended Minimum Operating

Pressure:30poundspersquareinch

To replace your water lter:

Itisnotnecessarytoturnthewatersupplyo

tochangethelter.Bereadytowipeupany

small amounts of water released during the

lterreplacement.

 1 TurnOtheicemaker.

 2 Removethelterbypushingontheend/

faceofthelter.

 3 Slidetheoldwaterltercartridgestraight

out of the housing and discard it.

 4 Unpackagethenewltercartridge.Using

the alignment guide, slide it gently into

thelterhousinguntilitstopsagainst

the snap-in connector at the back of the

housing.

 5 Pushrmlyuntilthecartridgesnapsinto

place (you should hear a click as the

cartridge engages the snap-in connector).

6 Press a drinking glass against the water

dispenser while checking for any leaks at

thelterhousing.Anyspurtsandsputters

that occur as the system purges air out of

the dispenser system are normal.

More about your Advanced

Water Filter

The PureSource Ultra

ice and

waterltersystemistestedand

certiedtoNSF/ANSIStandards

42, 53 and 401 for the reduction

ofclaimsspeciedonthe

performance data sheet.

 7 Afterllingoneglassofwater,continue

ushingthesystemforaboutfour

minutes.

8 Turn On the ice maker.

9 Press and hold the Water Filter button

on the Ice & Water Dispenser control

panel for three seconds. When the display

changes from “Red” to “Green,” the status

has been reset.

CHANGING THE FILTER - FRIGIDAIRE GALLERY

Locating the Filters

Yourrefrigeratorisequippedwithwater

lteringsystem.Thewaterltersystemlters

all dispensed drinking water, as well as the

waterusedtoproduceice.Thelterislocated

in the top right rear corner of the fresh food

compartment.

Water Filter

Thewaterlterislocatedatthetoprightside

of the fresh food compartment.

Ordering Replacement Filters

Toorderyourreplacementlters,pleasevisit

our online store at www.frigidaire.com/store,

by calling toll-free at 1-800-599-7569, or by

visiting the dealer where you purchased your

refrigerator. Frigidaire recommends that you

orderextralterswhenyourstinstallyour

refrigerator,andthatyoureplaceyourltersat

least once every six months.

Hereistheproductnumbertorequestwhen

ordering:

PureSource Ultra II

Water Filter

Part #EPTWFU01

Replacing the Water Filter

In general, you should change the water

ltereverysixmonthstoensurethehighest

possiblewaterquality.Water Filter Status

on the user interface prompts you to replace

thelterafterastandardamountofwater

(125 gallons/473 liters for PureSource

Ultra II

)

hasowedthroughthesystem.

If your refrigerator has not been used for a period

of time (during moving for example), change the

lterbeforereinstallingtherefrigerator.

Do not use with water that is microbiologically

unsafeorofunknownqualitywithoutadequate

disinfection before or after the system. Systems

certiedforcystreductionmaybeusedon

disinfectedwatersthatmaycontainlterablecysts.

Test & certication results:

• Rated Capacity - 125 gallons/473 liters for

PureSource Ultra II

iceandwaterlter

• Ratedserviceow-.65gallonsperminute

• Operating Temp: Min. 33°F, Max. 100°F

• Maximum Rated Pressure - 100 pounds

persquareinch

• Recommended Minimum Operating

Pressure:30poundspersquareinch

To replace your PureSource Ultra II

water lter:

Itisnotnecessarytoturnthewatersupplyo

tochangethelter.Bereadytowipeupany

small amounts of water released during the

lterreplacement.

 1 TurnOtheicemakerpowerswitch.

 2 Removetheoldlterbyrotatingitcounter-

clockwise (to the left) 90 degrees to release it.

 3 Slidetheoldltercartridgestraightoutof

the housing and discard it.

 4 Unpackagethenewltercartridge.Slideit

intothelterhousingasfarasitwillgowith

the grip end horizontal.

 5 Pushlightlyinwardonthelterwhilerotating

itclockwise(totheright).Thelterwillthen

pull itself inward as it is rotated. Rotate the

lter90degreesuntilitstopsandthegrip

end is vertical. You may be able to feel a very

lightclickasthelterlocksintoplace.

6 Press a drinking glass against the water

dispenser while checking for any leaks at

thelterhousing.Anyspurtsandsputters

that occur as the system purges air out of

the dispenser system are normal.

7 Continue dispensing water for 3-4 minutes

oruntil1.5gallonsofwaterhasowed

through the system. You will likely need to

emptyandrellyourglassseveraltimes.

8 Turn On the ice maker.

9 Press and hold the Water Filter reset

button on the control panel for three

seconds. When the display changes from

Red to Green, the status has been reset.

The PureSource Ultra II

iceandwaterltersystemis

testedandcertiedtoNSF/ANSI

Standards 42, 53 and 401 for the

reductionofclaimsspeciedon

the performance data sheet.

More about your Advanced

Water Filter



NOTE

Whenorderingyourreplacementlter,

pleasereorderthesameltertypethatis

currently in your refrigerator.

Filter Cartridge

CHANGING THE FILTER - FRIGIDAIRE PRO



NOTE

Energyecientfoaminyourrefrigeratoris

not a sound insulator.

Understanding the Sounds you

may Hear

Yournew,high-eciencyrefrigeratormay

introduce unfamiliar sounds. These sounds

normally indicate your refrigerator is operating

correctly.Somesurfacesonoors,walls,and

kitchen cabinets may make these sounds more

noticeable.

Following is a list of major components in your

refrigerator and the sounds they can cause:

A Evaporator Refrigerant through the

evaporator may create a boiling or

gurgling sound.

B Evaporator fan You may hear air being

forced through the refrigerator by the

evaporator fan.

C Defrost heater During defrost cycles,

water dripping onto the defrost heater

may cause a hissing or sizzling sound.

After defrosting, a popping sound may

occur.

D Automatic ice maker When ice has

been produced, you will hear ice cubes

falling into the ice bin.

E Electronic control & automatic

defrost control These parts can produce

a snapping or clicking sound when turning

thecoolingsystemonando.

F Condenser fan You may hear air being

forced through the condenser.

G CompressorModern,high-eciency

compressors run much faster than in the

past. The compressor may have a high-

pitched hum or pulsating sound.

H Water valve Makes a buzzing sound each

timeitopenstolltheicemaker.

I Drain pan (not removable) You may hear

water dripping into the drain pan during

the defrost cycle.

J Condenser May create minimal sounds

from forced air.

K Motorized damper May produce a light

humming during operation.

L Ice chute When dispensing ice, you will

hear a snapping or clicking sound when

the solenoid opens and closes the ice

chute.



NOTE

During automatic defrost cycle, a red glow in

the back wall vents of your freezer compart-

ment is normal.

NORMAL OPERATING SOUNDS AND SIGHTS

IMPORTANT

If you store or move your refrigerator in freezing temperatures, be sure to completely drain

the water supply system. Failure to do so could result in water leaks when the refrigerator is

put back into service. Contact a service representative to perform this operation.

CAUTION

• Pull the refrigerator straight out to move it. Shifting it from side to side may damage

ooring.Becarefulnottomovetherefrigeratorbeyondtheplumbingconnections.

• Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or

damp hands.



NOTE

Ifyousetyourtemperaturecontrolstoturnocooling,powertolightsandotherelectrical

components will continue until you unplug the power cord from the wall outlet.

Protecting your investment

Keeping your refrigerator clean maintains appearance and prevents odor build-up. Wipe up any

spills immediately and clean the freezer and fresh food compartments at least twice a year.

When cleaning, take the following precautions:

• Never use CHLORIDE or cleaners with bleach to clean stainless steel.

• Do not wash any removable parts in a dishwasher.

• Always unplug the electrical power cord from the wall outlet before cleaning.

• Remove adhesive labels by hand. Do not use razor blades or other sharp instruments which

can scratch the appliance surface.

• Do not remove the serial plate.

Donotuseabrasivecleanerssuchaswindowsprays,scouringcleansers,brushes,ammable

uids,cleaningwaxes,concentrateddetergents,bleachesorcleanserscontainingpetroleum

products on plastic parts, interior doors, gaskets or cabinet liners. Do not use paper towels,

metallic scouring pads, or other abrasive cleaning materials or strong alkaline solutions.

CARE & CLEANING

Vacation and moving tips

Occasion Tips

Short

Vacations

• Leave refrigerator operating during vacations of three weeks or less.

• Use all perishable items from refrigerator compartment.

• Turnautomaticicemakeroandemptyicebucket,evenifyouwillonlybe

gone a few days.

Long

Vacations

• Remove all food and ice if you will be gone one month or more.

• Turnthecoolingsystemo(see“Controls”sectionforlocationofOn/O

button) and disconnect power cord.

• Turn water supply valve to closed position.

• Clean interior thoroughly.

• Leave both doors open to prevent odors and mold build-up. Block doors open

if necessary.

Moving • Remove all food and ice.

• If using a handcart, load from the side.

• Adjust rollers all the way up to protect them during sliding or moving.

• Pad cabinet to avoid scratching surface.

CARE & CLEANING

Care and Cleaning Tips

Part Cleaning

Agents

Tips and Precautions

Interior &

Door Liners

• Soap and water

• Baking soda and

water

• Usetwotablespoonsofbakingsodainonequartof

warm water.

• Be sure to wring excess water out of sponge or cloth

before cleaning around controls, light bulb or any

electrical part.

Door Gaskets • Soap and water • Wipe gaskets with a clean soft cloth.

Drawers &

Bins

• Soap and water • Use a soft cloth to clean drawer runners and tracks.

• Do not wash any removable items (bins, drawers, etc.)

in dishwasher.

Glass

Shelves

• Soap and water

• Glass cleaner

• Mildliquidsprays

• Allow glass to warm to room temperature before

immersing in warm water.

Toe Grille • Soap and water

• Mildliquidsprays

• Vacuum

• Remove toe grille (see Installation Instructions).

• Vacuum both sides and wipe with sudsy cloth or

sponge. Rinse and dry.

Exterior &

Handles

• Soap and water

• Non abrasive

glass cleaner

• Do not use commercial household cleaners containing

ammonia, bleach or alcohol to clean handles.

• Use a soft cloth to clean smooth handles.

• Do not use a dry cloth to clean smooth doors.

Exterior &

Handles

(Stainless

Steel Models

Only)

• Soap and water

• Stainless steel

cleaners

• Never use CHLORIDE or cleaners with bleach to clean

stainless steel.

• Clean stainless steel front and handles with non-

abrasive soapy water and a dishcloth. Rinse with clean

water and a soft cloth.

• Use a non-abrasive stainless steel cleaner. These

cleaners can be purchased at most home improvement

or major department stores. Always follow

manufacturer’s instruction. Do not use household

cleaners containing ammonia or bleach. NOTE: Always

clean, wipe and dry with grain to prevent scratching.

• Wash the rest of the cabinet with warm water and

mildliquiddetergent.Rinsewellandwipedrywitha

clean soft cloth.

Replacing

Light Bulbs

• Unplug

refrigerator

• Wear gloves

• Remove light

cover

• Replace old bulb

• Replace light

cover

• Plug in the

refrigerator

• CAUTION: Wear gloves when replacing light bulbs to

avoid getting cut.

• Use same wattage when replacing bulb.

CARE & CLEANING



NOTE

LED lights are in series so if one is bad or

unplugged, several lights may not light up.

Replacing LED Lights

(select models)

The fresh food compartments of your

refrigerator may have LED lights. Always use

Frigidaire parts for replacement.

To replace LED Lights:

1 Unplug your refrigerator’s power cord.

2 Remove lens cover.

3 Remove LED board.

4 Replace LED board and snap in place

assuring the light is facing in toward the

unit (inside fresh food).

5 Replace lens cover.

Ordering Replacement LED Lights

Order new LEDs by calling 877-808-4195,

online at www.frigidaire.com/store, or through

the dealer where you bought the refrigerator.

Hereistheproductnumbertorequestwhen

ordering:

LED Light, Part #242196201

LED Light Board Removal

Lens Removal

Replacing light bulbs

(select models)

Both the freezer and fresh food compartments

of your refrigerator include light bulbs that

will need replacing from time to time. Some

lights have covers that you will need to remove

before replacing the bulbs. Always use bulbs

that are designed for appliance lighting.

To replace light bulbs:

1 Unplug your refrigerator’s power cord.

2 Wear gloves as protection against possible

broken glass.

3 Remove light cover, if necessary.

4 Unscrew and replace old bulb with an

appliance bulb of the same type and

wattage (normally 40 watts).

5 Replace light cover, if necessary.

6 Plug in the refrigerator’s power cord.

CAUTION

Wear gloves when replacing light bulbs to

avoid getting cut.

Crisper Light

Cover

Light Bulbs

Light Socket

Located Behind

Rear of

Crispers

Light Bulb

Light socket

located behind right

rear of ice container

CARE & CLEANING

Water

Filter

Bulbs

BEFORE YOU CALL

Visit our web site at

www.frigidaire.com

1-800-944-9044 (United States)

1-800-265-8352 (Canada)

CONCERN CAUSE SOLUTION

AUTOMATIC ICE MAKER

Ice maker is

not making any

ice.

• Icemakeristurnedo.

• Refrigerator is not

connected to water line

or water valve is not

open.

• The water supply line is

kinked.

• Thewaterlterisnot

seated properly.

• Thewaterltermaybe

clogged with foreign

material.

• Freezer ice maker wire

signal arm is being

held up by an item not

allowing it to go in the on

or down position. (Does

not apply to Frigidaire

Professional)

• Turn on ice maker. Press and hold the “ON-

OFF” button on the display panel for three

seconds until the indicator light turns on.

(Some Models) Move wire signal arm to the

“down” position on the ice maker.

• Connect the unit to the household water

supply and ensure the water valve is open.

• Ensure that the supply line does not kink

when the refrigerator is pushed into place

against the wall.

• For Frigidaire Gallery, remove and re-

installthewaterlter.Besuretopushthe

lterrmlysothatyouhearitlocksolidly

into position.

For Frigidaire Professional, remove

andre-installthewaterlter.Removeby

rotating it counter-clockwise (to the left)

90 degrees to release it. Re-install by

slidingitintothelterhousingasfarasit

will go with the grip end horizontal. Push

lightlyinwardonthelterwhilerotatingit

clockwise(totheright).Thelterwillthen

pull itself inward as it is rotated. Rotate the

lter90degreesuntilitstopsandthegrip

end is vertical. You may be able to feel a

verylightclickasthelterlocksintoplace.

• If water dispenses slowly or not at all, or

ifthelterissixmonthsoldorolder,it

should be replaced.

• Move any item or frozen ice cubes that

may block the signal arm from being in the

on or down position. See Automatic Ice

Maker-Freezer section in manual.

BEFORE YOU CALL

CONCERN CAUSE SOLUTION

AUTOMATIC ICE MAKER (Continued)

Ice maker is

not making

enough ice.

• Ice maker is producing

less ice than you expect.

• Thewaterltermaybe

clogged with foreign

material.

• The water supply line is

kinked.

• Saddle valve on cold

water pipe is clogged

or restricted by foreign

material.

• Heavytrac,opening

or closing of the doors

excessively.

• Freezer control is set too

warm.

• The ice maker produces approximately 2.5

to 3 pounds every 24 hours depending on

usage conditions.

• If water dispenses slower than normal,

orifthelterissixmonthsoldorolder,it

should be replaced.

• Ensure that the supply line does not kink

when the refrigerator is pushed into place

against the wall.

• Turnohouseholdwaterlinevalve.

Remove valve. Ensure that valve is not

a self-piercing saddle valve. Clean valve.

Replace valve if necessary.

• Press Fast Freeze to temporarily increase

ice production rate. (Does not apply to

Frigidaire Professional.)

• Set freezer control to colder setting to

improve performance of the ice maker.

Allow 24 hours for temperature to stabilize.

Ice maker

will not stop

making ice

(select models).

• Ice maker wire signal arm

is being held down by a

package in the freezer

that has fallen against ice

maker. (Does not apply to

Frigidaire Professional.)

• Move any item or frozen ice cubes that

may block the signal arm from being in the

oorupwardposition.SeeAutomaticIce

Maker-Freezer section in manual.

Ice cubes

are freezing

together.

• Ice cubes are not being

usedfrequentlyenough

or interruption of power

for prolonged time.

• Ice cubes are small or

hollow (shells of ice

with water inside). The

hollow cubes break open

in the bin and leak their

water onto existing ice,

which causes it to freeze

together.

• Remove ice container and discard ice. The

ice maker will produce fresh supply. Ice

should be used at least twice weekly to

keep the cubes separated.

• This generally occurs when the ice maker

does not get enough water. This is usually

theresultofacloggedwaterlteror

restricted water supply. Replace the water

lterandiftheconditionstilloccurscheck

for a Saddle Valve, water valve not turned

on all the way or kinked water supply line.

BEFORE YOU CALL

CONCERN CAUSE SOLUTION

DISPENSER (Ice & Water)

Dispenser will

not dispense

ice.

• Dispenser lock out is

engaged. (Does not

apply to Frigidaire

Professional.)

• There is no ice in the bin

to be dispensed.

• The refrigerator doors are

not completely closed.

• Dispenser paddle has

been pressed too long

and the dispenser motor

has overheated.

• Press and hold control lock for three

seconds.

• See the “Ice maker is not making any ice”

section above.

• Be sure the refrigerator doors are

completely closed.

• The motor overload protector will reset in

about three minutes and then ice can be

dispensed.

Ice dispenser is

jammed.

• Ice has melted and

frozen around auger

duetoinfrequentuse,

temperatureuctuations,

and/or power outages.

• Ice cubes are jammed

between ice maker and

back of ice container.

• Remove ice container, thaw, and empty the

contents. Clean container, wipe dry, and

replace in proper position. When new ice is

made, dispenser should operate.

• Remove ice cubes that are jamming the

dispenser.

Dispenser will

not dispense

water.

• Dispenser lock out is

engaged. (Does not apply

to Frigidaire Professional.)

• Waterlternotseated

properly.

• Waterlterisclogged.

• Household water line

valve is not open.

• Press and hold control lock for three

seconds.

• For Frigidaire Gallery, remove and

reinstallthewaterlter.Besuretopush

thelterrmlysothatyouhearitlock

solidly into position.

For Frigidaire Professional, remove and

reinstallthewaterlter.Besuretopress

inward as you rotate it clockwise to lock it

in place.

• For Frigidaire Gallery,replacelter

cartridge. Be sure to remove protective

capsandpushthelterrmlysothatyou

hear it lock solidly into position.

For Frigidaire Professional,replacelter

cartridge. Be sure to press inward as you

rotate it clockwise to lock it in place.

• Open household water line valve. See

CONCERN column AUTOMATIC ICE MAKER.

Water has an

odd taste and/

or odor.

• Water has not been

dispensed for an

extended period of time.

• Unit not properly

connected to cold water

line.

• Draw and discard 10-12 glasses of water to

freshen the supply.

• Connect unit to cold water line that

supplies water to the kitchen faucet.

BEFORE YOU CALL

CONCERN CAUSE SOLUTION

DISPENSER (Ice & Water) (Continued)

Water pressure

is extremely

low.

• Cut-oandcut-on

pressures are too low

(well systems only).

• Reverse osmosis system

is in regenerative phase.

• Havesomeoneturnupthecut-oandcut-

on pressure on the water pump

system (well systems only).

• It is normal for a reverse osmosis system

to be below 20 psi during the regenerative

phase.

Water not cold

enough.

• The water dispensing

system is not designed to

chill water.

• Add ice to cup or container before

dispensing water.

OPENING/CLOSING OF DOORS/DRAWERS

Door(s) will not

close.

• Door was closed too

hard, causing other door

to open slightly.

• Refrigerator is not level.

Itrocksontheoorwhen

moved slightly.

• Refrigerator is touching a

wall or cabinet.

• Close both doors gently.

• Ensureoorislevelandsolid,andcan

adequatelysupporttherefrigerator.

Contact a carpenter to correct a sagging or

slopingoor.

• Ensureoorislevelandsolid,andcan

adequatelysupporttherefrigerator.

Contact a carpenter to correct a sagging or

slopingoor.

Drawers are

dicult to

move.

• Food is touching shelf on

top of drawer.

• Track that drawers slide

on is dirty.

• Remove top layer of items in drawer.

• Ensure drawer is properly installed on

track.

• Clean drawer, rollers, and track. See Care

& Cleaning.

RUNNING OF REFRIGERATOR

Compressor

does not run.

• Freezer control is set to

“OF” or “0”.

• Refrigerator is in defrost

cycle.

• Plug at electrical outlet is

disconnected.

• House fuse blown or

tripped circuit breaker.

• Power outage.

• Set freezer control.

• This is normal for a fully automatic defrost

refrigerator. The defrost cycle occurs

periodically, lasting about 30 minutes.

• Ensure plug is tightly pushed into outlet.

• Check/replace fuse with a 15 amp time-

delay fuse. Reset circuit breaker.

• Check house lights. Call local electric

company.

BEFORE YOU CALL

CONCERN CAUSE SOLUTION

RUNNING OF REFRIGERATOR (Continued)

Refrigerator

runs too much

or too long.

(Single Speed

Compressor)

(Some Models)

• Room or outside weather

is hot.

• Doors are opened too

frequentlyortoolong.

• Fresh Food/freezer door

may be slightly open.

• Freezer control is set too

cold.

• Fresh Food/freezer gasket

is dirty, worn, cracked, or

poorlytted.

• Condenser is dirty.

• It’s normal for the refrigerator to work

longer under these conditions.

• Warm air entering the refrigerator causes it

to run more. Open doors less often.

• Ensure refrigerator is level. Keep food and

contains from blocking door. See PROBLEM

column OPENING/CLOSING OF DOORS/

DRAWERS.

• Set Fresh Food control to warmer

setting until refrigerator temperature

is satisfactory. Allow 24 hours for

temperature to stabilize.

• Clean or change gasket. Leaks in door

seal will cause refrigerator to run longer in

order to maintain desired temperatures.

• Clean condenser. See Care & Cleaning.

Compressor

goes o and on

frequently.

• Thermostat keeps the

refrigerator at a constant

temperature.

• This is normal. Refrigerator goes on and

otokeeptemperatureconstant.(Single

Speed Compressor) (Some Models)

Refrigerator

seems to run

too much

or too long.

(Variable Speed

Compressor)

(Some Models)

• Your variable speed

compressor is designed

to run 100% of the time

except during the defrost

cycle. At times it will run

faster, such as after a

defrost cycle.

• It is normal for the compressor to run

continuously except during defrost mode.

DIGITAL TEMPERATURE DISPLAY

Digital

temperature

displays are

ashing.

• Electronic control system

has detected a

performance problem.

• Call your Frigidaire service representative,

who can interpret any messages or number

codesashingonthedigitaldisplays.

WATER/MOISTURE/FROST INSIDE REFRIGERATOR

Moisture collects

on inside of

refrigerator

walls.

• Weather is hot and

humid.

• Door is slightly open.

• The rate of frost buildup and internal

sweating increases.

• See PROBLEM column OPENING/CLOSING

OF DOORS/DRAWERS.

Water collects

on bottom

side of drawer

cover.

• Vegetables contain and

giveomoisture.

• It is not unusual to have moisture on the

bottom side of the cover.

• Move humidity control (some models) to

lower setting.

Water collects

in bottom of

drawer.

• Washed vegetables and

fruit drain while in the

drawer.

• Dry items before putting them in the

drawer. Water collecting in bottom of

drawer is normal.

WATER/MOISTURE/FROST OUTSIDE REFRIGERATOR

Moisture

collects on

outside of

refrigerator or

between doors.

• Weather is humid.

• Door is slightly open,

causing cold air from

inside refrigerator to meet

warm air from outside.

• This is normal in humid weather. When

humidity is lower, the moisture should

disappear.

• See PROBLEM column OPENING/CLOSING

OF DOORS/DRAWERS.

MAJOR APPLIANCE WARRANTY

Your appliance is covered by a one year limited warranty. For one year from your original date of

purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove

to be defective in materials or workmanship when such appliance is installed, used and maintained in

accordance with the provided instructions.

Exclusions

If You Need Service

This warranty does not cover the following:

1. Products with original serial numbers that have been removed, altered or cannot be readily determined.

2. Product that has been transferred from its original owner to another party or removed outside

the USA or Canada.

3. Rust on the interior or exterior of the unit.

4. Products purchased “as-is” are not covered by this warranty.

5. Food loss due to any refrigerator or freezer failures.

6. Products used in a commercial setting.

7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances

not in ordinary household use or used other than in accordance with the provided instructions.

8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.

9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards,

shelves, etc., which are not a part of the appliance when it is shipped from the factory.

10. Servicecallstorepairorreplaceappliancelightbulbs,airlters,waterlters,other

consumables, or knobs, handles, or other cosmetic parts.

11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry

trip charges, or mileage expense for service calls to remote areas, including the state of Alaska.

12. Damagestothenishofapplianceorhomeincurredduringinstallation,includingbutnot

limitedtooors,cabinets,walls,etc.

13. Damages caused by: services performed by unauthorized service companies; use of parts other

than genuine Electrolux parts or parts obtained from persons other than authorized service

companies;orexternalcausessuchasabuse,misuse,inadequatepowersupply,accidents,

res,oractsofGod.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT

REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES,

INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE

LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE

YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH

AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS

WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO

NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,

OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR

EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by

Electrolux Major Appliances North America, a division of Electrolux Home Products, Inc. In Canada,

your appliance is warranted by Electrolux Canada Corp. Electrolux authorizes no person to change

or add to any obligations under this warranty. Obligations for service and parts under this warranty

mustbeperformedbyElectroluxoranauthorizedservicecompany.Productfeaturesorspecications

as described or illustrated are subject to change without notice.

Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty

periodshouldserviceberequired.Ifserviceisperformed,itisinyourbestinteresttoobtainand

keep all receipts. Service under this warranty must be obtained by contacting Electrolux at the

addresses or phone numbers below.

USA

1.800.944.9044

Frigidaire

10200 David Taylor Drive

Charlotte, NC 28262

Canada

1.800.265.8352

Electrolux Canada Corp.

5855 Terry Fox Way

Mississauga, Ontario, Canada

L5V 3E4

Frigidaire FGSS2335TF3 Official Side-by-side Refrigerator

Product's Documents

User Manual

Specifications

Frigidaire FGSS2335TF3 Questions and Answers