RCF E 16 OWNER'S MANUAL

Loading ...

ENGLISH

FRONT PANEL FUNCTIONS

[23] BAL

These controls, characteristic of stereo channels, allow to balance the position of a stereo channel into

the stereo image of the stereo MAIN MIX or BUS OUT.

[24] MONO TRIM

The MONO TRIM control allow to balance the level of MONO OUT with a range of + or - 15dBs.

(See section 36 of rear panel functions).

[25] MONO CHANNELS FADERS SECTION

This section allow to control the level of the 12 mono input channels and their routing to the output.

Each one of the fader has several control buttons:

MUTE: the MUTE button when pressed inhibit the signal to ﬂow to output bus or main mix paths.

1/2, 3/4 and MAIN buttons positioned on the right side of each fader allow to route the signal

respectively to STEREO BUS 1/2 , STEREO BUS 3/4 or MAIN MIX.

The PFL button allow to listen the signal present on the channel through speakers connected to the

CTRL ROOM OUTPUT (see section 40 of the rear panel description) or through headphones connected

to HEADPHONES OUTPUT (see section 15).

[26] STEREO CHANNELS FADERS SECTION

Same function of the MONO CHANNELS FADERS section applied to stereo channels.

[27] FX RET FADER

This fader controls the level of the signal coming from the internal Z.CORE DSP FX. the MUTE button

when pressed inhibit the signal to ﬂow to main mix path. The PFL button when pressed allow to listen

the signal present in FX return channel through speakers connected to the CTRL ROOM OUTPUT (see

section 40 of the rear panel description) or through headphones connected to HEADPHONES OUTPUT

(see section 15).

[28] BUS FADER

The faders BUS 1/2 and BUS 3/4 control the level of these two stereo bus out. BUS 1/2 and BUS 3/4

can be feed with each one of the input channel to create stereo audio groups routed to the physical

output BUS1 to BUS4 (See section 39 on rear panel description). the MUTE button when pressed inhibit

the signal to ﬂow to BUSSES output or main mix paths. The MAIN button positioned close the BUSSES

faders route the BUSSES to the MAIN MIX. The PFL button when pressed allow to listen the signal

present into BUSSES through speakers connected to the CTRL ROOM OUTPUT (see section 40 of the

rear panel description) or through headphones connected to HEADPHONES OUTPUT (see section 15).

[29] MAIN FADER

The MAIN fader controls the level of the MAIN MIX and the MONO signal. (refer to section 36 of the

rear panel description).

Loading ...

RCF E 16 16-CHANNEL MIXING CONSOLE WITH SUPERIOR EFFECTS AND EQs