Ancona AN1277 User Manual

Loading ...

— 15 —

Installation

STEP 10A (wall hoods only)

Mount Range Hood onto Wall

• Hang the range hood on the hooks of the hood mounting bracket.

(See Figure #4)

• Screw the range hood to the wall.

CAUTION - Make certain the range hood is secure before

releasing!

STEP 9A (wall hoods only)

Venting

• Fixthedamperaponthetopventofhood.

• If ventilation system is equipped with an external air duct with a different

diameter, apply a reduction tting. However, for maximum performance

and safety, a 6 in. round ducting is recommended. (See Figure #3)

Fig. #3

Fig. #4

STEP 11A (wall hoods only)

Connect Ductwork

• Attach ductwork to duct. Secure the ductwork with duct tape to make sure joints are secure and air- tight.

• Donotinstalltheducttapetootightlyasthismaypreventthedamperapsfromopeningwhichwilloverworkthemotor

and cause improper functioning of the unit.

• Fasten all connections with sheet metal screws and tape all joints with certied aluminum or foil tape. Use caulking to

seal exterior wall or roof opening around the cap.

STEP 12A (wall hoods only)

Connect to AC

• ConnectACplugintoagroundedACoutlethaving120V,60Hz.Placetheoutletatamaximumdistanceof33-1/2in.

(851 mm) from where the cord exits on the hood.

• SEE IMPORTANT INSTRUCTIONS ON NEXT PAGE.

3-Pronged Plug

Ground Plug

3-Prong Receptacle

• Optional step: For extra support, drill 2 additional holes aligned

to hood’s pre-drilled holes, to mount the hood onto the wall. (See

Figure #2)

Fig. #2

Loading ...

Ancona AN1277 30 Inch White Ducted Standard Hood Under Cabinet Hood