Loading ...
Loading ...
Loading ...
5
Mounting on a Table
10 cm
10 cm
(4 inches)
10 cm
8 cm
(3.1 inches)
21 cm
(8.2 inches)
• Lift and tilt the TV into its upright position on a table.
- Leave a 21 cm (8.2 inches) (minimum) space from the wall for
proper ventilation.
• Only use the authorized stand and wall mounting bracket made
specifically for LG products.
- Pursuant to Consumer Protection Law, LG Electronics will not be
held responsible for any product malfunction, material damage or
injury caused by using products not authorized by LG Electronics.
20˚
20˚
• If there is a problem with angle adjustment, lift the product slightly
and put it back down.
• Do not apply foreign substances (oils, lubricants, etc.) to the screw
parts when assembling the product. (Doing so may damage the
product.)
• If you install the TV on a stand, you need to take actions to prevent
the product from overturning. Otherwise, the product may fall over,
which may cause injury.
• Do not use any unapproved items to ensure the safety and product
life span.
• Any damage or injuries caused by using unapproved items are not
covered by the manufacturer’s warranty.
• Make sure that the screws are inserted correctly and fastened
securely. (If they are not fastened securely enough, the TV may tilt
forward after being installed.) Do not use too much force and over
tighten the screws; otherwise screw may be damaged and not
tighten correctly.
• Make sure the TV is level.
• It is safe to install the product according to the installation method
to prevent the damage to the product or personal injury even if the
product is pulled forward.
• Allow sufficient space around the product. Otherwise, it may lose its
balance during rotation and fall, causing injury or product damage.
Make sure to use a cabinet or shelf that is an appropriate size for the
product.
• When rotating the TV, make sure there are no objects around it, and
place the product on a flat surface for smooth rotation. Users who are
not professional installation staff can also adjust the angle.
Loading ...