Loading ...
Loading ...
Loading ...
Problem Possible cause Solution
Temperature cannot be set. The Extra Freeze function or
Extra Cool function is switch‐
ed on.
Switch off Extra Freeze func‐
tion or Extra Cool function
manually, or wait until the
function deactivates auto‐
matically to set the tempera‐
ture. Refer to "Extra Freeze
function" or "Extra Cool func‐
tion" section.
The temperature in the appli‐
ance is too low/too high.
The temperature is not set
correctly.
Set a higher/lower tempera‐
ture.
The door is not closed cor‐
rectly.
Refer to "Closing the door"
section.
The food products' tempera‐
ture is too high.
Let the food products tem‐
perature decrease to room
temperature before storage.
Many food products are stor‐
ed at the same time.
Store less food products at
the same time.
The door has been opened
often.
Open the door only if neces‐
sary.
The Extra Freeze function is
switched on.
Refer to "Extra Freeze func‐
tion" section.
The Extra Cool function is
switched on.
Refer to "Extra Cool func‐
tion" section.
There is no cold air circula‐
tion in the appliance.
Make sure that there is cold
air circulation in the appli‐
ance. Refer to "Hints and
tips" chapter.
appears on the
display.
The appliance is in the dem‐
onstration mode.
To exit the demonstration
mode, press and hold the
Extra Cool and ECO buttons
for approximately 10 sec‐
onds until you hear 3 short
beeps.
The symbol ap‐
pears and the alarm indica‐
tor is on.
Communication problem. Contact the nearest Author‐
ised Service Centre. The
cooling system will continue
to keep food products cold,
but temperature adjustment
will not be possible.
ENGLISH 25
Loading ...
Loading ...
Loading ...