Loading ...
2 3
intended for household use only.
24.
To reduce the risk of injury, never place cutting
blade or disc on base without first putting bowl
properly in place. Be certain the cover is securely
locked in place before operating appliance.
Never feed food by hand. Always use food
pusher. Do not attempt to defeat the cover
interlock mechanism.
25. Do not operate your appliance in an appliance
garage or under a wall cabinet. When storing
in an appliance garage,
always unplug the unit from the electrical
outlet. Not doing so could create a risk of fire,
especially if the appliance touches the walls
of the garage or the door touches the unit as
it closes.
26. DO NOT blend carbonated beverages in the
blender jar.
27. Do not fill the bowl above the marked
maximum fill line (or rated capacity) to avoid
risk of injury due to damage to the cover or
bowl.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONLY
NOTICE:
This appliance has a polarized plug (one prong
is wider than the other). To reduce the risk of
electric shock, this plug will fit into a polarized
outlet only one way. If the plug does not fit fully
into the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not
modify the plug in any way.
This appliance comes with a resettable thermal
device to prevent damage to the motor in the
case of extreme overload. Should the unit shut off
unexpectedly, unplug it and let it cool for at least
15 minutes before continuing (see “To reset the
unit,” on page 5).
Maximum of 700 watts rated power is based on
blender jar attachment. Other attachments may
draw significantly less power.
UNPACKING
INSTRUCTIONS
1. Place the gift box containing your
Goodful
by
Cuisinart
®
Blender/Food Processor
on a large,
sturdy, flat surface before unpacking.
2. Open top flaps and remove instruction booklet
and other printed materials from top of pulp tray.
3. Set the large panel of the gift box face down
and gently slide the pulp tray containing the
reversible slicing/shredding disc and food
processor accessory out of the gift box.
4. Carefully remove the disc from the pulp tray and
set aside, as it is VERY SHARP. Remove the
adapter stem from pulp tray’s 2 sides, then lift
out the food processor accessory.
5. Slide another pulp tray containing the blender
jar assembly out of the gift box.
6. Remove the jar cover and measuring cup, then
carefully lift motor base and set aside.
7. Gently remove blender jar by grasping the jar
handle.
To assemble the blender, follow Blender Jar
Assembly instructions on page 5 of this instruction
booklet. Replace all packing material in the
box and save the box for repackaging. See the
Features and Benefits section on page 4 of this
booklet for a listing of all parts. Before using for the
first time: Wash all parts according to the Cleaning,
Storage and Maintenance section on page 6 of this
booklet to remove any dust.
TABLE OF CONTENTS
Important Safeguards ....................2
Unpacking Instructions ....................3
Features and Benefits ....................4
Blender Jar Assembly ....................5
Helpful Reminders ........................5
Operation ..............................5
Cleaning, Storage and Maintenance..........6
Dos and Don’ts ..........................6
Food Processor Assembly, Use and Care .....8
Food Processor Operation .................8
Quick Reference Guides .................10
Warranty...............................13
Recipes ...............................15
IMPORTANT
SAFEGUARDS
When using an electrical appliance, especially
when children are present, basic safety
precautions should always be taken, including
the following:
1. READ ALL INSTRUCTIONS BEFORE
USING.
2. To protect against the risk of electric shock,
do not put motor base of appliance in water
or other liquids.
3. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory, or mental capabilities, or
lack of experience and knowledge, unless
they are closely supervised and instructed
concerning use of the appliance by a person
responsible for their safety. Close supervision
is necessary when any appliance is used by or
near children. Children should be supervised
to ensure that they do not play with the
appliance.
4. Turn the application OFF, then unplug from
the outlet when not in use, before assembling
or disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the
outlet. Never pull from the power cord.
5. Avoid contact with moving parts. Keep fingers
out of discharge opening.
6. Do not operate any appliance with a
damaged cord or plug or after the appliance
malfunctions or is dropped or damaged in
any manner. Contact the manufacturer at
their customer service telephone number for
information on examination, repair and/or
mechanical or electrical adjustment.
7. The use of attachments, including canning or
ordinary jars, not recommended or sold by
Cuisinart may cause fire, electric shock or risk
of injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of counter or
table or touch hot surfaces.
10. Keep hands and utensils out of jar/bowl
while blending/processing food to reduce
the risk of severe injury to persons or
damage to blender/food processor itself.
A rubber or plastic spatula may be used, but
must be used only when the blender/food
processor is turned off.
11. When blender is on, do not touch cutting
assembly, interfere with blade movement or
remove blender jar cover. Accidentally turning
the knob may activate the blender.
12. BLADES ARE SHARP. HANDLE
CAREFULLY.
13. To reduce the risk of injury, never place
cutting assembly on base unless the blender
jar is properly attached.
14. Always operate blender with the cover
in place.
15. Never leave your appliance unattended while
it is running.
16. Twist removable blade assembly firmly to
blender jar. Injury can result if moving blades
accidentally become exposed.
17. Regarding your cord set: A longer cord has
been provided so that you will have flexibility
in positioning your Goodful™ by Cuisinart
®
Blender/Food Processor. Exercise care when
using the longer cord to avoid entangling or
tripping over the cord. The longer cord should
be arranged so that it will not drape over the
counter or tabletop, where it can be pulled
on by children or tripped over. Excess cord
should be stored in the cord storage area at
the back of the motor base to avoid injury
caused by the longer cord.
18. Wash the blender jar, blade assembly, cover,
work bowl, chopping/mixing blade, reversible
slicing/shredding disc, and feed tube before
first use.
19. WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK OR FIRE, DO NOT
REMOVE THE BASE PANEL. NO USER-
SERVICEABLE PARTS ARE INSIDE. REPAIR
SHOULD BE DONE ONLY BY AUTHORIZED
PERSONNEL.
20. When blending hot liquids in blender jar,
remove measured pour lid to allow steam
to escape.
21. Never feed food into food processor by hand.
Always use the food pusher.
22. Make sure the blade or disc has come to a
full stop before removing cover.
23. This food processor attachment is to be used
only with the
Goodful
by Cuisinart
®
Blender/
Food Processor
. Do not use with any other
manufacturer’s motor base. This appliance is
Loading ...
Loading ...
Loading ...