Loading ...
Loading ...
Loading ...
13
ENGLISH
Register Online
Thank you for your purchase. Register your product nowfor:
• WARRANTY SERVICE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with yourproduct.
• CONFIRMATION OF OWNERSHIP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
ofpurchase.
• FOR YOUR SAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
SafetyAct.
• Register online at www.dewalt.com
Repairs
The charger and battery pack are notserviceable. There are
no serviceable parts inside the charger or batterypack.
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a
DeWALT
factory service center or a
DeWALT
authorized service center. Always use identical
replacementparts.
Accessories
WARNING: Since accessories, other than those offered
by
DeWALT
, have not been tested with this product, use
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only
DeWALT
recommended
accessories should be used with thisproduct.
Recommended accessories for use with your tool are available
at extra cost from your local dealer or authorized service
center. If you need assistance in locating any accessory, please
contact
DeWALT
call 1‑800‑4‑
DeWALT
(1-800-433-9258) or
visit our website: www.dewalt.com.
Storage
• Always completetely empty water from the suction hose,
power cleaner, spray wand, nozzles, and soap bottle.
• Store in a dry, covered location above freezing
temperature. STOREINDOORS.
Three Year Limited Warranty
For warranty terms, go to https://www.dewalt.com/Legal/
Warranty/3‑Year‑Limited‑Warranty.
To request a written copy of the warranty terms, contact:
Customer Service at D
e
WALT Industrial Tool Co., 701East
Joppa Road, Towson, MD 21286or call 1‑800‑4‑
DeWALT
(1-800-433-9258).
4. Unclog any debris from thenozzle.
5. Run water from a faucet or garden hose through
thenozzle.
Soap Bottle (Fig.A)
1. To clean the soap bottle, shut off the power cleaner and
turn off the watersupply.
2. Pull trigger on gun handle to relieve any waterpressure.
3. Decouple the soap bottle
11
from the power cleaner
and unscrew the soap bottlenozzle.
4. To clean the soap bottle
11
, empty any remaining
detergent back into its container. Use water from a
garden hose to thoroughly rinse out the bottle. Empty
the bottle and allow it todry.
5. Reinstall soap bottle nozzle to the soapbottle.
Suction Hose (Fig.M)
1. To clean the suction hose
12
, shut off the
powercleaner.
2. Pull trigger switch to relieve any waterpressure.
3. Decouple the suction hose
12
from the powercleaner.
4. To clean the suction hose, use water from a garden hose
to thoroughly rinse out the suction hose and allow it
todry.
Suction Hose Filter (Fig.M)
• Turn the filter
20
on the end of the suction hose
12
counterclockwise and remove. Remove the strainer from
inside of the filter. Rinse all of the parts with clean water
andreassemble.
Quick Connect Filter (Fig.A, N)
1. Pull back the collar on the quick connect hose
adapter
13
and remove the garden or suction hose from
the quick connect filter
7
.
2. Remove the quick connect filter from the powercleaner.
3. Inside the quick connect filter
7
is a screen filter
21
.
Remove the screen filter and rinse with clean water
andreassemble.
Loading ...
Loading ...
Loading ...