1
Waffle BAKER
MANUAL INSTRUCTIONS
INTRODUCTION:
This WAFFLE BAKER is a new style of electro-thermal product specially designed
for OUR COMPANY. All electrical components of the product are supplied by
reliable manufacturers, to ensure quality and high level of safety and low energy
consumption. Moreover, the machine has a thermostatic feature which can be
easily operated. Boasting full features and high quality, this machine is the best
product available in the market today that are being used by supermarkets, bars,
western food restaurants, and fast food canteen.
■ High-efficient, energy-saving & useful
■
Easy to clean and operate
■ Luxurious，beautiful & safe
■ Voltage: 220V/110V /50-60Hz
■
Power: 1.2KW
■ Dimension: 450*250*280 mm
FEATURES:
MODEL:HT-2206E
2
READ THIS MANUAL INSTRUCTION CAREFULLY BEFORE USING THE
UNIT. PLEASE KEEP THIS FOR FUTURE REFERENCE.
1. Place the Cone Baker horizontally on a firm workbench. Check if the power plug
is properly connected.
2. Turn the power switch to “O” (OFF), and the temperature controller knob to
“OFF”.
3. Turn the power switch to “I” (ON), the power will supply to the unit.
4. Adjust the temperature controller knob to 250℃. The red lamp will light
indicating the electro-thermal pipes are supplied with power and are starting to
heat.
5. When the temperature reaches to 250℃, the temperature controller will
automatically disconnect the power supply and the yellow indicator lamp will
go out, indicating the electro-thermal pipes stop heating.
6. When the temperature drops a little , the temperature controller will
automatically re-connect to power supply and the red lamp will light, indicating
the electro-thermal are starting to heat again. This process will repeat over and
over again. Maintaining the temperature within the preset range.
7. When the temperature reaches to 250℃, film the baking plate with some seed
fat, put the paste in the baking plate, put down the upper cover, set the time of
the calculagraph. The time range is 0-5 minutes.
8. When the operation is completed, turn the temperature controller knob to
“OFF”, and the power switch to “O”. Disconnect the power supply to ensure
safety.
OPERATING INSTRUCTIONS:
REPAIRS AND MAINTENANCE:
Always unplug the unit and let it completely cool down before cleaning. It shall be
cleaned with a soft and dry piece of cloth, or with neutral detergent when
necessary. Avoid scratching the surface of the unit with sharp metal. The unit shall
not be cleaned with a water jet or be immersed in water for cleaning. If the unit will
not be used for long period of time, it must be cleaned and stored in a place with
good ventilation and without corrosive gas. When temporary storage is needed,
proper rainproof measures shall be taken.
Before operation, check that your mains voltage corresponds to that stated on the
appliance. Place this unit on a dry, level surface. No combustible or explosive
objects can be placed in its vicinity. The operation space must have good
ventilation, with the ambient temperature not higher than 50℃.
