Loading ...
ww w.SereneLifeHome.com
Steps to set the code of the cipher lock
1. The initial code is 0000.
2. Switch the lever from Point B to Point A,
after conrm about the initial code.
3. Set your own code
4. Switch the lever from Point A to Point B, after the code is set.
5. Please memorize the code that you set and follow step 2, step 3 and step 4 to set a new code.
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: [email protected]
Let the door and main body in 90 degrees,
install the shaft hole corresponds to the
door axis from top to bottom.
Install the upper and lower drawer on
the related track.
5
6
Password setting diagram:
Pull out the upper drawer, then set the
password in the inner lock.
Note: For safety purpose, this box does not reserve any
position for outer unlock device in its structural design
and is not easy to dismantle after assembly. Please pay
full attention to each steps of code setting, make sure
the 4 digits lock codes set is exactly in parallel line, then
put the code set lever back to "B" position, do not forget
your set codes to avoid any inconvenience.