Loading ...
Loading ...
Loading ...
ARP-2210
Remove the rubber sealing plug Continuous drain hose
CLEANING THE AIR FILTER
The lter should be cleaned about every 2 weeks to maintain proper air flow
Important : Do not operate the unit without an air lter, or the evaporator may be contaminated.
1. Press POWER button to turn OFF the unit. Unplug the unit from the electrical power outlet.
2. Remove the lter mesh from the unit.
3. Use a vacuum cleaner or brush to clean the air lter.
4. Turn the lter over and rinse the air lter under running water. Set the air lter aside and allow
thelterto air dry completely beforereinstalling.
Turn OFF and unplug unit. Remove
the two air lters for cleaning
Rinse the air lter under running
water.
STORAGE
If you will not be using the unit for an extended period of time (more than a few weeks) it is best to
clean the unit and dry it out completely. The unit must be kept in upright position when in storage.
1. Unplug the unit and remove exhaust hose and window kit store with the unit.
2. Drain the remaining water from the unit.
3. Clean the lter and let the lter dry completely.
4. Re-install the lter.
5. Preserving the machine in ventilating, dry, non- corrosive gas and safe place indoor.
-12-
Loading ...
Loading ...
Loading ...