Loading ...
Loading ...
Loading ...
Installation and connection
24
Attaching the mounting plate
2 plugs and 2 T20TORX screws are
supplied for attaching the mounting
plate to the wall.
You will also need a battery-operated
screwdriver or a drill (with a drilling dia-
meter of 6mm).
Depending on how you decide to con-
figure your vacuum cleaner, select a
distance of 45cm or 98cm between
the bottom edge of the mounting plate
and the floor.
Be careful not to damage any cables
laid in the wall.
Attach the mounting plate to the wall.
Attaching the charging cable
to the wall bracket
A cable compartment is located on the
underside of the wall bracket.
Press both release catches on the un-
derside of the wall bracket and re-
move the cable compartment cover.
Plug the supplied charging cable into
the opening from above.
Lay the charging cable in its guide.
Loading ...
Loading ...
Loading ...