Loading ...
Loading ...
Loading ...
- 5 -
• The laser tool is sealed and calibrated at the plant for specified accuracy.
• It’s recommended to carry out an accuracy check before its first use and periodic
checks during future use especially for precise layouts.
• When not in use please power OFF the tool and place the pendulum lock in
its locked position.
• In Manual Mode, self leveling is OFF. The accuracy of the beam is not ensured to
be level.
• Do not short any battery terminals, charge alkaline batteries, or dispose of
batteries in a fire.
• Do not mix old and new batteries. Instead, replace all of them simultaneously
with new batteries of the same brand and type.
• Keep batteries out of reach of children.
• Remove batteries if the tool will not be used for several months.
• Do not store the laser tool in direct sunlight or expose it to high temperatures.
The housing and some internal parts are made of plastics and may deform at high
temperatures.
• Exterior plastic parts may be cleaned with a damp cloth. Although these parts
are solvent resistant, NEVER use solvents. Use a soft, dry cloth to remove
moisture from the tool before storage.
• Store the tool in its case when not in use. If storing for an extended time, remove
batteries before storage to prevent possible damage.
• Do not dispose of this product with household waste.
• Always dispose of batteries per local code.
• Please recycle in line with local provisions for the collection and disposal of
electrical and electronic waste under the WEEE Directive.
Loading ...
Loading ...