Loading ...
Loading ...
Loading ...
10
1/22 Rev. F 171375
4. Secure interior latches (Figure 4)
5. Seal cowl to ceiling at gasket seam above diffuser panel using provided silicone (Figure 5)
6. Replace diffuser panel removed in step 1.
Some adjustment may be required by simply bending the ceiling section divider slightly forward or
backward. This will prevent any short cycling of discharge and return air.
The vaporizer is intended to be mounted in the orientation shown below. Note the location of the condensate
drain coming from the evaporator and locate the vaporizer so the condensate water will drain into it. Use the
supplied plastic tubing and copper elbow and extend the drain into the vaporizer. Cut the plastic tubing to the
desired length.
Provide power to the electric vaporizer per local national electrical codes. Avoid locating vaporizer below any
electrical enclosures.
Loading ...
Loading ...
Loading ...