Loading ...
Loading ...
Loading ...
INSTALLATION MANUAL
INSTALLATION
10
B
C
3 ] Using the finger cup, remove the grease filters from the hood by pushing down and tilting
filters out .
1
2
3
45
6
7
4 ] Remove and set aside the damper flap (A). Remove the blower cover plate (in grey). Using a
11/32” nutdriver or socket, remove the lock nut retaining the flange of the cover plate (shaded
part on illustration below) to the inner back of hood (see inset). Remove the cover plate
retaining screws (7 screws), then set the blower cover along with its screws and nut aside.
BACK OF HOOD
LOCK NUT
Prepare the Hood
1 ] If present, remove all protective polyfilm from the hood and/or parts.
2 ] Remove 2 screws from top of hood. Remove the 3¼’’ x 10’’ adapter and the 3¼’’ x 14’’ adapter
frame from the back of hood (see illustration below). Keep the screws for further use.
SCREWS
SCREWS
A
Loading ...
Loading ...
Loading ...