2
Your new washer dryer
You have chosen a Bosch washer dryer.
Please take a few minutes to read and
become familiar with the advantages of
your washer dryer.
To meet the high quality demands
required by Bosch, every washer dryer
that leaves our factory is carefully
checked to ensure that it functions
correctly and is in perfect condition.
For more information on our products,
accessories, replacement parts and
services, see our website www.bosch-
home.com/us or contact our after-sales
service centres.
If the operating and installation
instructions describe different models,
any differences will be pointed out at the
relevant points in the text.
Read these operating and installation
instructions before switching on the
washer dryer.
GB standard:
GB4706.1
GB4706.20
GB4706.24
GB/T23118
GB19606
GB4343.1
GB17625.1
GB/T 4288
GB12021.4
Display rules
: Warning!
This combination of symbol and signal
word indicates a possibly dangerous
situation. Not heeding the warning can
cause death or injuries.
Caution!
This signal word indicates a possibly
dangerous situation. Not heeding the
caution can cause property and/or
environmental damage.
Note/tip
Information about the optimum use of
the appliance/any other useful
information.
1. 2. 3. / a) b) c)
The steps are represented by numbers
or letters.
■ / -
Lists are represented by a small box or
a dash.
en
3
Contents
enInstruction Manual and Installation Instructions
8 Intended use. . . . . . . . . . . . . . . . .4
( Safety instructions . . . . . . . . . . .5
Electrical safety. . . . . . . . . . . . . . . . . . 5
Risk of injury . . . . . . . . . . . . . . . . . . . . 5
Safety for children. . . . . . . . . . . . . . . . 5
7 Protection of the environment . .7
Packaging/used appliance . . . . . . . . . 7
Hints and tips . . . . . . . . . . . . . . . . . . . 8
5 Positioning and connecting . . . .9
Included with the appliance . . . . . . . . 9
Safety instructions. . . . . . . . . . . . . . . . 9
Installation surface . . . . . . . . . . . . . . 10
Installing the appliance on a base
or on a wooden joist ceiling . . . . . . . 10
Installation on a platform with drawer 10
Installing the appliance in a kitchenette
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Removing the transport locks . . . . . . 10
Hose and cable lengths . . . . . . . . . . 11
Water inlet. . . . . . . . . . . . . . . . . . . . . 11
Water outlet . . . . . . . . . . . . . . . . . . . 12
Alignment . . . . . . . . . . . . . . . . . . . . . 13
Electrical connection. . . . . . . . . . . . . 13
Before washing/drying for the first time
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Transportation. . . . . . . . . . . . . . . . . . 14
Y The main points in brief . . . . . .15
* Getting to know your appliance16
Washer dryer . . . . . . . . . . . . . . . . . . 16
Control panel . . . . . . . . . . . . . . . . . . 17
Display panel . . . . . . . . . . . . . . . . . . 18
Z Laundry. . . . . . . . . . . . . . . . . . . .20
Preparing laundry for washing . . . . . 20
Preparing laundry for drying . . . . . . . 21
1 Operating the appliance . . . . . .22
Preparing the washer dryer. . . . . . . . 22
Selecting the programme/Switching on
the appliance. . . . . . . . . . . . . . . . . . .22
Adjusting the washing programme . .22
Adjusting the drying programme . . . .23
Loading the laundry. . . . . . . . . . . . . .24
Dosing and adding detergent and care
product . . . . . . . . . . . . . . . . . . . . . . .24
Starting the programme . . . . . . . . . .25
Childproof lock . . . . . . . . . . . . . . . . .25
Reloading the laundry . . . . . . . . . . . .26
Changing the programme . . . . . . . . .26
Interrupting or ending the programme
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
End of the programme . . . . . . . . . . .27
After washing/drying . . . . . . . . . . . . .27
/ Overview of programmes . . . . . 28
Programme on the programme selector
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Drying table . . . . . . . . . . . . . . . . . . . .31
Soaking . . . . . . . . . . . . . . . . . . . . . . .31
0 Changing programme default
settings. . . . . . . . . . . . . . . . . . . . 32
°C Temp.. . . . . . . . . . . . . . . . . . . . . .32
0 rpm . . . . . . . . . . . . . . . . . . . . . . . .32
ñ Finished in. . . . . . . . . . . . . . . . . . .32
5 Dry . . . . . . . . . . . . . . . . . . . . . . . .32
\ Selecting additional functions . 33
G SpeedPerfect . . . . . . . . . . . . . . .33
F EcoPerfect . . . . . . . . . . . . . . . . . .33
l Rinse plus . . . . . . . . . . . . . . . . . .33
MSetting the signal . . . . . . . . . . . . 34
2 Cleaning and maintenance. . . . 35
Appliance housing/control panel. . . .35
Drum . . . . . . . . . . . . . . . . . . . . . . . . .35
Descaling . . . . . . . . . . . . . . . . . . . . .35
Cleaning the detergent dispenser . . .35
Drain pump blocked . . . . . . . . . . . . .36
Drainage hose on the siphon blocked
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Filter in the water inlet hose blocked.37
en Intended use
4
3 Faults and what to do about them
37
Emergency release, e.g. if a power
failure occurs . . . . . . . . . . . . . . . . . . 37
Information on the display panel . . . 38
Faults and what to do about them . . 38
4 After-sales service . . . . . . . . . . 41
J Technical specifications . . . . . 41
[ Consumption values . . . . . . . . 42
8 Intended use
Intended use
■ For use in the household only.
■ The washer dryer is suitable for
washing machine-washable textiles
or hand-washable wool in wash
liquor and for drying these textiles.
■ The appliance is suitable to be
operated with cold drinking water
and commercially available
detergents and care products which
are suitable for use in washer dryer.
■ When dosing all detergents,
cleaning aids, cleaning products
and cleaning agents, always follow
the manufacturer's instructions.
■ The washer dryer may be operated
by children from 8 years of age, by
persons who have limited physical,
sensory or mental abilities and by
persons who have inadequate
experience or knowledge, provided
they are supervised or have been
instructed by a responsible person.
■ Children must not perform any
cleaning or maintenance work
without supervision.
■ Keep pets away from the washer
dryer.
■ Install and operate the washer dryer
in a room which has an outflow.
Read and follow the operating and
installation instructions and all other
information enclosed with the washer
dryer.
Retain documents for subsequent use.
Safety instructions en
5
( Safety instructions
Safety instructi ons
Electrical safety
:Warning
Danger of death!
Danger of death if live parts are
touched.
■ When disconnecting the
mains plug, always pull the
plug itself and not the cable,
otherwise the cable could be
damaged.
■ Never touch or hold the
mains plug with wet hands.
Risk of injury
:Warning
Risk of injury!
■ If the washer dryer is lifted
using projecting parts
(e.g. the washer dryer door),
these components may
break off and cause injuries.
Do not lift the washer dryer
by its projecting parts.
■ If you climb onto the washer
dryer, the worktop may break
and cause injuries.
Do not climb onto the
washer dryer.
■ If you lean/support yourself
on the open door, the
washer dryer may overturn
and cause injuries.
Do not lean on the open
washer dryer door.
■ If you reach into the rotating
drum, you may injure your
hands.
Do not grip the rotating
drum. Wait until the drum
stops rotating.
:Warning
Risk of scalding!
■ When washing at high
temperatures, you may be
scalded if you touch the hot
washing water
(e.g. if draining hot washing
water into a washbasin).
Do not touch the hot
washing water.
■ If a drying programme was
interrupted, the washer dryer
and laundry may be very hot.
Select Intensive Dry 5 or
Gentle Dry ‰ and select
15 min drying time to cool
down the washing and then
remove.
Safety for children
:Warning
Danger of death!
If children play with the washer
dryer, they may get into life-
threatening situations or injure
themselves.
■ Do not leave children
unattended near the washer
dryer.
■ Do not let children play with
the washer dryer.
en Safety instructions
6
:Warning
Danger of death!
Children may lock themselves
in appliances, putting their lives
at risk.
For appliances that have
reached the end of their service
life:
■ Disconnect the mains plug.
■ Cut through the mains cable
and remove it, along with
plug.
■ Destroy the lock on the
washer dryer door.
:Warning
Risk of choking!
Children may become wrapped
in packaging/film or packing
parts if allowed to play with
them, or they may pull them
over their heads and suffocate.
Keep packaging, film and
packaging parts out of the
reach of children.
:Warning
Risk of poisoning!
Detergents and care products
may be poisonous if
consumed.
Keep detergents and care
products out of the reach of
children.
:Warning
Eye / skin irritation!
Detergents and care products
may cause irritation if they
come into contact with the eyes
or skin.
Keep detergents and care
products out of the reach of
children.
:Warning
Risk of injury!
When you wash/dry at high
temperatures, the glass in the
washer dryer door gets hot.
Do not let children touch the
hot washer dryer door.
Protection of the environment en
7
7 Protection of the
environment
Protecti on of the environment
Packaging/used appliance
Dispose of packaging in an environmentally-responsible manner.
Keep children away from the packaging materials and packaging materials are not
toys.
Reprocessing and reuse of packaging material saves raw materials, reducing waste.
All packaging materials used are in line with environmental protection requirements
and reusable.
Name and content of hazardous substances in products
Component
name
Hazardous substance
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VI))
Polybrominated
biphenyls (PBB)
Polybromin-
ated diphenyl
ethers (PBDE)
PCB x Û Û Û Û Û
Display x Û Û Û Û Û
Controller x Û Û Û Û Û
Power cord and
connect wiring
harness
x Û Û Û Û Û
Pumps and
drives
x Û Û Û Û Û
Housing Û Û Û Û Û Û
Door and its
constituent
parts
x Û Û Û Û Û
Drum-system
and its constitu-
ent parts
x Û Û Û Û Û
Water supply
components
(exempted
dryer)
x Û Û Û Û Û
This table was developed according to the provisions of SJ/T 11364.
Û The content of such hazardous substance in all homogeneous materials of such component is below
the limit required by GB/T 26572.
x The content of such hazardous substance in a certain homogeneous materials of such component is
beyond the limit required by GB/T 26572.
en Protection of the environment
8
Note:
All of component parts in the BSH products that fall into the same category are
covered in the table above, the component parts of this product depend on the
actual situation. If you have any questions, please contact us by dialling the
customer service number in the product.
Hints and tips
■
Utilise the maximum amount of
washing for the particular
programme.
Overview of programmes
~ Page 28
■ Wash normally soiled laundry
without prewash.
■ Energy saving mode: The display
panel light goes out after several
minutes, A flashes. To reactivate
the display, select any button.
The energy-saving mode is not
activated if a programme is running.
■ The selectable temperatures apply
to the care labels on the textiles. The
temperatures in the machine may
deviate from this so that you get the
optimum mix of energy-saving and
washing results.
■ If the laundry is then dried in
the appliance, select the maximum
possible spin speed. The less water
the laundry contains, the less time
and energy are required for drying.
Do not dry dripping wet laundry.
Indicative Statement of Environment Protection of Product
Please use and maintain the product according to the instruction of the manual, the product may harm to
environment and human health due to improper utilization or disposal.
According to the law of ‘Statute of Recovery and Disposal of Waste Electrical and Electronic Products’,
Please hand in the products to the disposal enterprises which are qualified when you plan to throw it.
Please refer to the table above for the information about the content of relevant toxic and hazardous sub-
stances.
Positioning and connecting en
9
5 Positioning and
connecting
Positioning and connecting
Included with the appliance
Note:
Check the machine for transport
damage. Never use a damaged
machine. If you have any complaints,
contact the dealer from whom you
purchased the appliance or our
customer services.
In addition, a hose clamp (24 - 40 mm
diameter, available from specialist
dealers) is required to connect the
water drain hose to a siphon.
Useful tools
■ Spirit level for aligning
■ Spanner with:
– WAF13 for loosening the
transport braces, and
– WAF17 for aligning the appliance
feet
Safety instructions
:Warning
Risk of injury!
■ The washer dryer is very heavy.
Be careful when lifting/transporting
the washer dryer.
■ When the washer dryer is lifted by its
protruding parts (e.g. the washer
dryer door), the components may
break off and cause injuries.
Do not lift the washer dryer by
protruding parts.
■ If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washer dryer in areas
exposed to frost or outdoors.
Caution!
Water damage
The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
leaks and water damage, you must
follow the instructions in this section.
Notes
■
In addition to the safety information
listed here, the local water and
electricity supplier may have special
requirements.
■ If in doubt, have the appliance
connected by a specialist.
( Mains cable
0 Bag:
■ Installation and operating
instructions
■ Warranty
■ Cover caps for openings after
the transport braces have
been removed
8 Water drain hose
@ Water supply hose on standard/
Aqua-Secure models
#
en Positioning and connecting
10
Installation surface
Note:
The washer dryer must be stable
so that it does not move around.
■ The installation surface must be firm
and level.
■ Soft floors/floor coverings are not
suitable.
Installing the appliance on
a base or on a wooden joist
ceiling
Caution!
Damage to the appliance
The washer dryer may wander during
the spin cycle and topple or fall off its
base.
Always secure the washer dryer feet
with holding brackets.
Holding brackets: order no.
WMZ 2200, WX 975600, CZ 110600,
Z 7080X0.
Note: If installing on a wooden joist
ceiling:
■ If possible, install the washer dryer in
a corner.
■ Screw water-resistant wooden board
(min. 30 mm thick) to the floor.
Installation on a platform with
drawer
*
Platform order no.: WMZ20540W,
WMZ20540S, WMZ2040G.
Installing the appliance in a
kitchenette
:Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Do not remove the appliance covering
plate.
Notes
■
Recess width of 60 cm required.
■ Only install the washer dryer
underneath a continuous worktop
that is securely connected to
adjacent cabinets.
Removing the transport locks
Caution!
Damage to the appliance
■
The machine is secured for
transportation using transport locks.
If the transport locks are not
removed, the drum, for example,
may become damaged when the
machine is operated.
Before using the appliance for the
first time, make sure that you
completely remove all four transport
locks. Keep the locks in a safe
place.
■ To prevent transport damage from
occurring if the appliance is moved
at a later date, you must refit the
transport locks before transporting
the appliance.
Note: Keep the screws and sleeves in
a safe place.
* Depending on the model
Positioning and connecting en
11
1. Take the hoses out of the holders.
2. Unscrew and remove all four
transportation securing bolts with a
wrench (WAF 13).
Remove the sleeves. Remove the
mains cable from the holders.
3. Insert the covers. Lock the covers
firmly in place by applying pressure
to the snap-in hooks.
Hose and cable lengths
Connection on left side
or
Connection on right side
Note: If the hose holders are used, the
possible hose lengths are reduced!
Available from dealer/customer
service:
■ Longer supply hose (approx.
2.20 m).
Water inlet
:Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Notes
■
Only operate the washer dryer using
cold mains water.
■ Do not connect the machine to the
mixer tap of an unpressurised hot-
water boiler.
■ Do not use a used supply hose. Only
use the supply hose supplied or one
that was purchased from an
authorised specialist retailer.
■ Do not kink or squash the water
supply hose.
■ Do not alter (shorten, cut through)
the water supply hose (otherwise its
strength is no longer guaranteed).
■ Only tighten the screw connections
by hand. If the screw connections
are tightened too much with a tool
(pliers), the thread may become
damaged.
aFP
aFP
aFP
aFP
aFP
aFP
PLQ
FP
PD[
FP
en Positioning and connecting
12
Optimum water pressure in the supply
network
At least 100 kPa (1 bar)
Maximum 1000 kPa (10 bar)
When the tap is open, the water flow
rate is at least 8 l/min.
If the water pressure is higher than this,
a pressure-reducing valve must be
installed.
Connection
Connect the water supply hose to the
tap (26.4 mm = ¾"):
Note: Turn on the tap carefully,
checking the leak tightness of the
connection points. The screw
connection is under mains water
pressure.
Water outlet
:Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of scalding
if you come into contact with hot water
(e.g. when draining hot water into a
washbasin).
Do not reach into the hot water.
Caution!
Water damage
If the drain hose slips out of the
washbasin or the connection point
during draining due to high water
pressure, any escaping water may
cause water damage.
Secure the drain hose so that it cannot
slip out.
Caution!
Damage to the appliance/fabrics
If the end of the drain hose is immersed
in the drained water, water may be
sucked back into the appliance and
may damage the appliance/fabrics.
Make sure that:
■ The plug does not block drainage
from the washbasin.
■ The end of the drain hose is not
immersed in the drained water.
■ The water drains away quickly
enough.
Note: Do not kink the water drain hose
or put strain on it lengthways.
Connection
■
Drainage into a washbasin
■ Drainage into a siphon
The connection point must be
secured using a hose clamp with a
diameter of 24 - 40 mm (available
from specialist dealers).
Positioning and connecting en
13
■ Drainage into a plastic pipe with
rubber bushing or into a drainage
pit
Alignment
1.
Loosen the lock nut in a clockwise
direction with a wrench.
2. Check the alignment of the washer
dryer with a spirit level and, if
required, correct. Adjust the height
by rotating the appliance foot.
Note: All four appliance feet must
be firmly on the floor.
The washer dryer must not wobble!
3. Tighten the lock nut against the
housing.
Grip the foot and do not adjust the
height.
Notes
■
The lock nuts on all four appliance
feet must be screwed tightly against
the housing!
■ Any loud noises, intense vibrations
or “wandering” may be due to
incorrect alignment!
Electrical connection
Electrical safety
:Warning
Risk of electric shock!
Risk of death if live parts are touched.
■ When disconnecting the main plug,
always pull the plug itself and not the
cable, otherwise the cable could be
damaged.
■ Never touch or hold the mains plug
with wet hands.
■ Never pull out the mains plug during
operation.
■ Only connect the washer dryer to an
alternating current using a correctly
installed earthed socket.
■ The mains voltage must be the same
as the voltage specifications on the
washer dryer (appliance rating
plate).
■ The connected load and the required
fuse are also indicated on the
appliance rating plate.
Ensure that:
■ The mains plug and socket match.
■ The cable cross-section is adequate.
■ The earthing system has been
installed correctly.
■ A damaged power cord is only
replaced by an electrician.
A replacement mains cable can be
obtained from customer service.
■ You do not use multiple plugs/
couplings or extension cables.
■ If a residual-current-operated circuit
breaker is used, you use only a type
which features this symbol: z.
Only this symbol guarantees
compliance with the currently valid
regulations.
■ The mains plug is always accessible.
■ The power cord is not kinked,
crushed, altered or severed and has
not come into contact with any heat
sources.
en Positioning and connecting
14
Before washing/drying for the
first time
The washer dryer was inspected
thoroughly before leaving the factory. To
remove any residual test water, run the
Drum Clean programme the first time
without laundry.
Note:
■
The washer dryer must have been
installed and connected properly.
Installation and connection
■ Never switch on a damaged washer
dryer. Inform your customer service.
1. Insert mains plug.
2. Turn the tap on.
3. Switch on the appliance.
4. Close the door. Do not load any
laundry.
5. Select the Drum Clean 40°C
programme.
6. Open the detergent drawer.
7. Pour approx. 1 litre of water into
dispenser II.
8. Add standard detergent to
dispenser II according
to manufacturer’s instructions for
light soiling.
Note: To prevent frothing, use only
half the recommended amount
of detergent. Do not use any
woollens or mild detergents.
9. Close the detergent drawer.
10.Select Start/Reload A.
11.When the programme ends, switch
off the appliance.
Your washer dryer is now ready for
use.
Transportation
Preparatory work
1. Turn off the tap.
2. Release the water pressure in the
supply hose.
Filter in the water inlet hose blocked
~ Page 37
3. Drain any residual washing water.
Drain pump blocked ~ Page 36
4. Disconnect the washer dryer from
the power supply.
5. Remove the hoses.
Installing transportation protection
devices:
1. Remove the covers and keep in a
safe place.
If required, use a screwdriver.
2. Insert all 4 sleeves.
Clamp the mains cable on the
holders. Insert and tighten the bolts.
Before switching on the appliance:
Notes
■
Always remove the transportation
protection devices!
■ To prevent unused detergent from
flowing into the outlet during the next
wash: Pour 1 litre of water into
dispenser II and start the Single
Spin programme.
The main points in brief en
15
Y The main points in
brief
The main points in bri ef
--------
--------
--------
--------
1 @ @ @
Plug into the mains.
Turn the tap on.
Open the washer
dryer door.
Select the washing/
drying programme
Max. load and/or
remaining time in
display panel.
2 @ @
If required, change the programme default
settings and/or select additional functions.
Sort the laundry. Load the laundry.
3 @ @ @
FODFN
Open the detergent
drawer.
Dose detergent
according to the dosing
recommendation.
~ Page 24
Close the washer
dryer door.
Select Start/Reload.
4 @ @ @
End of the
programme.
Set programme
selecter to Off.
Open the door and
remove the laundry.
Turn off the water
tap (for models
without Aqua-Stop),
and disconnect the
mains plug.
en Getting to know your appliance
16
* Getting to know your
appliance
Getting to know your appliance
Washer dryer
67
#
( Detergent drawer
0 Operating/display panel
8 Door with handle
9S Open the door
9T Close the door
@ Service flap
Getting to know your appliance en
17
Control panel
#
( Select a programme. Can be rotated in either
direction. To switch off the washer dryer, set
the programme selector to Off.
0 Select buttons Š Dry, drying programme
starts automatically after washing finished.
8 Display panel for information.~ Page 18
@ Select buttons °C Temp., 0 rpm,
ñ Finished in and Š Dry for changing
default settings.
~ Page 32
Select buttons GSpeedPerfect/ FEcoPerfect
and Ï Rinse plus for additional functions.
~ Page 33
H Start programme. Select the Start/Reload
A button to start, interrupt (e.g. reload
laundry) and cancel the programme.
en Getting to know your appliance
18
Display panel
Displays for the programme
#
+
( Temperature for washing
programme
Ž (cold) – 90°C Temperature in °C
0 Programme information 1:50* Programme duration after programme
selection in h:min (hours:minutes)
1 – 24 h Finish in time in h (h=hour)
8.0 kg* Max. load for selected programmes
0 – 1200 0* Spin speed in revolutions per minute. If spin
speed is selected as 0, all spinning pro-
cesses will be cancelled and the water after
final rinse cycle will be pumped out.
Programme status: End Programme end
0:00 Wrinkle guard process is running
~ Page 27
– – – – End of programme with spin speed setting –
– – –
Further information: E : - -* Fault display
8 Programme progress sym-
bols
N Washing
O Rinsing
0 Draining/Spinning
Š Drying
Q Wrinkle guard
Getting to know your appliance en
19
@ Programme information and
additional function symbols
E lights up On if childproof lock has been activated
~ Page 25
E flashes The childproof lock is actived, and if the pro-
gramme selector has been adjusted or the
buttons have been pressed
Õ lights up When the door is locked
Õ flashes When pressing the Start/Reload button to
start the programme, the door is not closed
properly.
r lights up Water pressure too low. This extends the
programme duration
r flashes The tap has not been turned on or there is
no water pressure
Å On if too much foam detected, additional
rinse cycle added on
ñ On if finish in time was selected
SpeedPerfect G On if the desired additional function is
selected, see details ~ Page 33
EcoPerfect F
Rinse Plus Ï
Dry Š On if drying function is activated.
Start/Reload A On if the appliance is running; flashes if the
appliance is ready or paused.
H Selectable drying mode and
dry time
» Cupboard dry (Auto dry)
· Extra Dry (Auto dry)
15 15 minutes machine cooling
60, 120 60/120 minutes time dry
* Depends on selected model, programmes and additional functions.
en Laundry
20
Z Laundry
Laundry
Preparing laundry for washing
Sorting laundry according to:
Sort your laundry according to the care
instructions and specifications of the
manufacturer on the care labels:
■ Type of fabric/fibre
■ Colour
Note: Laundry can discolour or not
be cleaned correctly. Wash white
and coloured items separately.
Wash new bright fabrics separately
the first time you wash them.
■ Soiling
– light
do not prewash; if necessary
select the ( SpeedPerfect
additional function.
– normal
Select programme with prewash.
If required, pretreat stains.
– heavy
Load less washing. Select
programme with prewash. If
required, pretreat stains.
– Stains: Remove/pretreat stains
while they are fresh. Firstly, dab
with a soap water; do not rub.
Then select the appropriate
programme and wash the items.
Stubborn or dried-in stains can
sometimes only be removed by
washing several times.
– Symbols on the care labels
Note: The numbers in the symbols
indicate the maximum washing
temperature that may be used.
Protecting your laundry and appliance
Caution!
Damage to the appliance/textiles
Foreign objects (e.g. coins, paper clips,
needles, nails) may damage the
washing or components of the
appliance.
The following instructions must be
observed when preparing your laundry:
■ Always follow the manufacturer's
instructions when dosing
all detergents, cleaning aids, care
products and cleaning agents.
■ Do not exceed maximum load.
Overfilling will impair the washing
result.
■ Keep detergents and agents for the
pretreatment of laundry (e.g. stain
remover, prewash sprays, etc.) away
from the surfaces of the appliance.
Using a damp cloth, immediately
remove any fine spray residue and
other residue or droplets.
M Suitable for normal washing
process;
e.g. Cottons programme
N A gentle washing process is
required;
e.g. Easy-Care programme
O An especially gentle washing
process is required; e.g.
Delicates/Silk programme
W Suitable for washing by hand;
e.g. W Wool program
Ž Do not machine wash.
Laundry en
21
■ Empty any pockets. Remove any
foreign objects.
■ Remove metal parts (paper clips,
etc.).
■ Trousers, knitwear and knitted
textiles, e.g. jersey garments, T-shirts
or sweatshirts, should be turned
inside out.
■ Ensure that underwired bras are
appliance-washable.
■ Wash delicates in a net or bag
(tights, underwired bras, etc).
■ Close zips, button up covers.
■ Brush sand out of pockets and
collars.
■ Remove curtain fittings or include in
the net/bag.
Preparing laundry for drying
Note:
To ensure an even drying result,
sort the laundry according to the:
■ Type of fabric
■ Drying programme
■ Care symbols which are indicated on
the care labels.
Only dry laundry which is labelled
“dryer-proof” or which has the following
care symbols:
■ a = Dry at normal temperature
(Intensive Dry 5 )
■ ` = Dry at low temperature
(Gentle Dry ‰ )
The following textiles must not be dried:
■ b = care symbol “Do not dry”
■ Wool or textiles containing wool.
■ Delicates (silk, synthetic curtains).
■ Textiles which contain foam rubber
or similar materials.
■ Textiles which were treated with
flammable liquids, e.g. with stain
remover, petroleum ether, thinners.
Risk of explosion!
■ Textiles which still contain hairspray
or similar substances.
Notes
■
Before drying, hand-washed textiles
must be spun at the appropriate spin
speed.
■ Before drying, spin at the optimum
speed. A spin speed of more than
1000 rpm is recommended for
cotton, more than 800 rpm for easy-
care textiles.
■ Do not iron washing immediately
after drying. It is recommended to
roll the washing up first to distribute
residual moisture evenly.
■ To ensure a good drying
performance, quilts, terry cloths and
other large textiles should be dried
separately. Do not dry more than 5
terry cloths (or 4 kg).
■ Do not exceed the maximum load.
en Operating the appliance
22
1 Operating the
appliance
Operating the appliance
Preparing the washer dryer
The washer dryer was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Drum clean programme.
Before washing/drying for the first time
Note:
■
Never switch on a damaged washer
dryer!
■ Inform your customer service!
1. Insert mains plug.
2. Turn the tap on.
Due to the use of the water
condensation technology for drying,
please keep the connected water
tap open during the drying process,
otherwise proper drying cannot be
guaranteed.
3. Open the door.
Selecting the programme/
Switching on the appliance
Note:
If you have activated the childproof lock,
you must deactivate it before you can
set a programme.
■ Select the required programme with
the programme selector. Can be
rotated in either direction.
The washer dryer is switched on.
The following figures are indicated
continuously on the display panel for
the selected programme:
■ the programme duration,
■ the preset temperature,
■ the maximum load (if the door is
open),
■ ...
Adjusting the washing
programme
You can use the displayed default
settings or adjust the selected
programme optimally to the laundry
items by changing the default settings
or selecting additional functions. The
selectable settings and additional
functions depend on the selected
washing/drying programme.
Overview of programmes~ Page 28
Operating the appliance en
23
Notes
■ Options can be selected, deselected
or changed depending on the
progress of the programme.
■ The buttons are sensitive, they only
need to be touched gently. If the
button °C Temp., 0 rpm,
ñ Finished in is held down, the
setting options are automatically
scrolled through.
Changing default settings for a
washing programme, e. g. washing
temperature:
■ Touch the °C Temp. button to set
desired washing temperature.
Changing the additional functions for
a washing programme, e.g. select G
Speed Perfect:
■ Touch the G Speed Perfect/F
Eco Perfect button until the G
indicator light comes on.
Note:
After changing the programme default
settings and/or additional functions, the
programme duration may change.
Adjusting the drying
programme
Note:
If an individual drying programme or
washing and drying without interruption
is selected, you can change the default
settings for the drying programme if
required.
Overview of programmes~ Page 28
Changing the default settings for
a drying programme:
■ Touch the Š Dry button to set the
desired drying mode or drying time
(only for an individual drying
programme).
Note:
After changing the default settings for
the drying programme, the programme
duration may change.
en Operating the appliance
24
Loading the laundry
:Warning
Danger of death!
Laundry items pretreated with solvent-
based detergents, e.g. stain remover/
petroleum ether, may cause an
explosion if loaded into the washer
dryer.
Thoroughly rinse laundry items by hand
before washing.
Notes
■
Mix large and small items. Laundry
items of different sizes distribute
themselves better during the spin
cycle. Individual laundry items may
cause an unbalanced load.
■ Observe the indicated maximum
load. Overfilling adversely affects
the washing result and promotes
creasing.
1. Unfold presorted laundry items and
place in the drum.
2. Ensure that no laundry items are
trapped between the door and
rubber seal.
3. Close the door.
Note: The indicator light on the Start/
Reload button flashes and the default
settings for the programme appear
continuously on the display panel.
Changes may be made to the default
settings.
Dosing and adding detergent
and care product
Caution!
Damage to the appliance
Detergents and agents for the
pretreatment of laundry (e.g. stain
remover, prewash sprays, etc.) may
damage the surfaces of the washer
dryer.
Keep these agents away from the
surfaces of the washer dryer. Using a
damp cloth, immediately remove any
fine spray residue and other residue/
droplets.
Dosing
Dose the detergents and care products
according to:
■ water hardness (ask your water
supply company),
■ the manufacturer’s specifications on
the packaging,
■ the amount of laundry,
■ soiling.
Filling the dispensers
1. Pull out the detergent drawer.
:Warning
Eye / skin irritation!
If the detergent drawer is opened
while the appliance is running,
detergent/care product may run out.
Carefully open the drawer.
If detergent/care product comes into
contact with eyes or skin, rinse
thoroughly.
If accidentally swallowed, seek
medical advice.
Operating the appliance en
25
2. Pour in detergent and/or cleaning
product.
*depending on the model
Notes
■ Always follow the manufacturer's
instructions when dosing
all detergents, cleaning aids, care
products and cleaning agents.
■ Dilute viscous fabric softener
and fabric conditioner with water.
This will prevent blockages.
■ Be careful when opening the
detergent drawer while the appliance
is running.
■ If an individual drying programme is
selected, please do not add
detergent and/or care product in the
appliance.
Measuring aid* for liquid detergent
*depending on the model
Position the measuring aid for
measuring the correct amount of liquid
detergent:
1. Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2. Slide the measuring aid forwards,
fold it down and click it into place.
3. Reinsert the drawer.
Note: Do not use the measuring aid for
gel detergents and washing powder, or
for programmes with prewash or when
"Finish in" time is selected.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Starting the programme
Touch the Start/Reload button. The
indicator lamp is lit and the programme
starts.
Note: If you want to secure the
programme to prevent it from being
adjusted inadvertently, select the
childproof lock.
The display panel shows the Finished in
time while the programme is running or
the programme duration and the
programme progress symbols when the
washing programme has started.
Display panel~ Page 18
Childproof lock
You can secure the washer dryer to
prevent the set functions from being
changed inadvertently. To do this,
activate the childproof lock when the
programme has started.
Activating/deactivating: Touch and hold
the buttons 0 rpm and ñ Finished in
for approx. 3 seconds. The symbol w
is indicated in the display. If the button
signal is activated, an acoustic signal
sounds.
Dispenser I Detergent for prewash.
Dispenser i Softener, starch. Do not exceed
the maximum load.
Dispenser II Detergent for main wash, water
softener, bleach, stain remover.
Dispenser A* For dosing liquid detergent.
en Operating the appliance
26
■ w lights up: The childproof lock is
activated.
■ w flashes: The childproof lock is
active and the programme selector
has been adjusted. To prevent the
w symbol from flashing, reset the
programme selector to the initial
programme. The symbol lights up
again.
Note:
The childproof lock may remain
activated until the next programme
starts, even after the washer dryer has
been switched off. If this is the case,
deactivate the childproof lock before the
programme starts and, if required, re-
activate after the programme starts.
Reloading the laundry
When the programme has started, the
laundry can be reloaded or taken out as
required.
Touch the Start/Reload button. The
washer dryer checks whether reloading
is possible.
Notes
■
If there is a high water level, high
temperature or if the drum is
rotating, the door remains locked
for safety reasons and reloading is
not possible.
If the following is indicated on the
display panel:
Õ is lit ~ Reloading is not
possible. To continue the
programme, select the Start/Reload
button.
■ Do not open the door until the door
lock symbol Õ goes out.
■ Do not leave door open for
a prolonged period – water could
run out of the laundry.
■ The reloading function cannot be
activated during the drying phase.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1. Select Start/Reload A.
2. Select another programme. If
required, adjust the default settings
and/or select additional functions.
3. Select Start/Reload A. The new
programme starts from
the beginning.
Interrupting or ending the
programme
For programmes at high temperature:
1. Select Start/Reload A.
2. To cool down laundry: Select Single
Rinse.
3. Select Start/Reload A.
For programmes at low temperature:
1. Select Start/Reload A.
2. Select Single Spin.
3. Select Start/Reload A.
For drying programmes:
1. Select Intensive Dry 5 or Gentle
Dry ‰.
2. Touch button 5 Dry and set drying
time to 15 minutes.
3. Select Start/Reload A.
Operating the appliance en
27
End of the programme
End or – – – – (Rinse stop = without
final drain/spin cycle) is indicated in the
display and acoustic signal sounds.
Setting the signal
If – – – – (Rinse stop = without final
drain/spin cycle) was selected, press
Start/Reload button to start the final
drain/spin cycle.
Notes
■ The programme continues by
pumping out the water and spinning
the laundry (the standard spin speed
can be changed beforehand).
■ If only the water is to be pumped out,
approx. 1 minute after the
programme starts, touch the Start/
Reload button before the spin cycle
starts. The programme is interrupted
and the door lock is released. The
laundry can be removed.
■ If Hot flashes in the display before
the drying programme ends, the
temperature in the drum is high. The
programme for cooling the drum
runs until the temperature in the
drum has dropped.
■ Wrinkle guard process starts after
drying process is finished to prevent
laundry getting wrinkle if you do not
take laundry out in time. The process
lasts about 30 minutes. 0:00 will be
displayed in time display and Ó
symbol will be displayed as the
status symbol. You can press any
button or rotate the programme
selector to another position to
terminate this process, then the door
will be released and laundry can be
taken out.
After washing/drying
1.
Open the door and remove the
laundry.
2. Turn the programme selector to Off.
The appliance is switched off.
3. Turn off the tap.
Not required for Aqua-Stop models.
Notes
■
Do not leave any items of laundry in
the drum. In the next wash they may
shrink or discolour another item.
■ Remove any foreign objects from
the drum and the rubber seal – risk
of rust.
■ Leave the detergent drawer and
door open so that residual water can
evaporate.
■ Always remove the laundry.
■ Always wait until the programme
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for the unlocking device.
■ When the display panel has gone
out at the end of the programme,
energy-saving mode is active. To
activate the display again, select any
button.
en Overview of programmes
28
/ Overview of
programmes
Overview of programmes
Programme on the
programme selector
Programme/Type of washing Options/Information
Name of the programme
Brief explanation of the programme and which textiles it is suitable
for.
maximum load for washing/
maximum load for drying
selectable temperature in °C
selectable spin speeds in rpm
possible additional functions for
washing
possible settings for drying
Super15’/30’/45’
Extra short program approx. 15 minutes, suitable for lightly soiled
and small amounts of laundry.
Extra short program approx. 30 minutes, suitable for lightly soiled
textiles made of cotton or linen in short time.
Extra short program approx. 45 minutes, suitable for lightly soiled
textiles made of cotton or linen.
Note:
* Reduced load for G additional function.
3.5( 2.0)* kg/2.0 kg
Ž (cold) – 40 °C
– – – –, 0 – 1200 rpm
G, F
», ·
Hygiene Care
An innovative program, pretreat dry laundry by hot air (up to 70°C)
to for increased hygienic demands, followed by a low temperature
washing cycle. Achieves both hygiene effect and fabric care. Suita-
ble for most non-delicate textile.
4.0 kg/4.0 kg
Ž (cold) – 30 °C
– – – –, 0 – 1200 ***rpm
G, F, Ï
», ·
Cotton
Standard washing program for hard-wearing textiles made of cotton
or linen.
Note:
* Reduced load for G additional functions.
8.0(5.0)* kg/5.0 kg
Ž (cold) – 90 °C
– – – –, 400 – 1200 ***rpm
G, F, Ï
», ·
Mix
Mixed load consisting of textiles made of cotton and synthetics.
4.0 kg/2.5 kg
Ž (cold) – 40 °C
– – – –, 0 – 1200 ***rpm
G, F, Ï
», ·
Overview of programmes en
29
Plush Toy
Suitable for machine-washable or dry-type plush toys or pillow cush-
ions, not for plush toys containing paper parts.
1.5 kg/1.5 kg
Ž (cold) – 40 °C
– – – –, 0 – 1200 rpm
G, F, Ï
»
Outdoor+
Washing followed by water proofing of weatherproof and outdoor
clothing with membrane coating and water-resistant textiles.
1.0 kg/1.0 kg
Ž (cold) – 40 °C
0 – 800 rpm
G, F, Ï
Not possible for softener
»
Down
Machine-washable fabrics that are filled with down.
Notes
■
Wash large items separately.
■ Use special down washing detergent.
1.5 kg/1.0 kg
Ž (cold) – 60 °C
– – – –, 0 – 1200 rpm
G, F, Ï
», ·
Drum Clean
Special program for drum hygiene or fluff removal:
90 °C = antibacterial program, do not use detergent.
40 °C = antibacterial program; special drum cleaning detergent can
be used.
Ž (cold)= rinsing programme for the removal of fluff which has col-
lected in the washer drum during the drying phase.
0.0
Ž (cold), 40°C, 90 °C
1200 rpm
–
–
Single Rinse
Washable textiles, Extra rinse with spin.
-/5.0 kg
–
– – – –, 0 – 1200 ***rpm
Ï
»
Single Spin
Single spinning program with selectable spin speed.
To select the Drain programme, set the spin speed to 0.
-/5.0 kg
–
0 – 1200 ***rpm
–
»
Programme/Type of washing Options/Information
en Overview of programmes
30
Wool
Hand and machine-washable fabrics made of wool or wool blend;
particularly gentle wash programme to prevent shrinkage of laun-
dry, with longer programme breaks (soaking garments in the deter-
gent solution).
Note:
■
Wool is of animal origin, e.g.: Angora, alpaca, llama, sheep.
■ Use a detergent suitable for machine washable wool.
2.0 kg
Ž (cold) – 40 °C
– – – –, 0 – 800 rpm
–
–
Delicate
For delicate, washable textiles, e.g.made of silk, satin, synthetic
fibres or blended fabrics.
Note:
Use a detergent suitable for machine washable delicate fabrics or
silk.
2.0 kg
Ž (cold) – 40 °C
– – – –, 0 – 800 rpm
G, F, Ï
–
Night Wash
Noise reduction without acoustic signal and slow spin speed.
For cotton, synthetic fibres, blended fabric.
4.0 kg/2.5 kg
Ž (cold) - 40°C
– – – –, 0 - 1200 ***rpm
G, F, Ï
», ·
Gentle Dry ‰
Single gentle dry programme for drying garments with lower tem-
perature,
- Touch button 5 Dry to select » Cupboard dry or · Extra dry
Note:
** 15 min drying time is for cooling down the laundry and machine
after drying process.
2.5 kg
–
–
–
», ·, Time dry**
Intensive Dry 5
Single normal dry program for drying garments with higher tempera-
ture.,
- Touch button 5 Dry to select drying model » Cupboard dry or ·
Extra dry
Note:
** 15 min drying time is for cooling down the laundry and machine
after drying process.
5.0 kg
–
–
–
», ·, Time dry**
Note: *** The maximum spin speed is 1400rpm for WDG28...
Programme/Type of washing Options/Information
Overview of programmes en
31
Drying table
Soaking
1.
Pour soaking agent/detergent into
dispenser II according
to the manufacturer’s instructions.
2. Set the programme selector to
Cotton 60°C and select Start/
Reload.
3. After approximately 10 minutes
select Start/Reload to pause the
programme.
4. After the required soaking time,
reselect Start/Reload if the
programme is to be continued or
change the programme.
Note: Load laundry of the same colour.
No additional detergent is required,
the soaking solution is used for
washing.
Estimated drying time (min)
Load type Recom-
mended dry-
ing programme
Drying
load (kg)
Cupboard
dry »
Extra dry ·
Cottons/coloureds (color fast
textiles made of cotton or linen such
as underwear, T-shirts, pullover,
kitchen towels, terry cloths, bed
sheets, table cloths, work clothes,
bath towels)
Intensive dry 0.5 - 2.0 40 - 90 60 - 100
2.0 - 3.5 90 - 160 100 - 190
3.5 - 5.0 160 - 220 190 - 240
Easy-care (textiles made of synthetic
materials or blended fabrics such as
shirts, sportswear)
Gentle Dry 0.5 - 1.5 35 - 75 40 - 120
1.5 - 2.5 75 - 120 120 - 190
Drying pro-
gramme
Drying
load (kg)
Adjustable drying time
(min)
Time Dry ~1.0 60
~2.5 120
± The times are approximate and refer to a normal load, standard spin programme and room temper-
ature.
± The maximum selectable drying time is 120 min. If the laundry weighs more than 2.5 kg, select au-
tomatic drying. This function is recommended to ensure good drying results and save energy. The
15-minute drying programme is used to cool the laundry.
± To get evenly dried result, separate thick layered fabric from lightweight ones. For example, sepa-
rate terry cloth from shirts.
± Extra dry · is recommended for terry cloth and other large or thick layered textiles.
± Wool must not be dried in the washer dryer.
± To receive less wrinkled drying result, load less laundry.
en Changing programme default settings
32
0 Changing programme
default settings
Changing programme default settings
You can change the default settings for
selected programmes. The settings can
be changed even while the selected
programme is running. The effects
depend on the progress of the
programme.
°C Temp.
(: The indicated washing
temperature can be changed. The
maximum selectable washing
temperature varies depending on the
selected programme.
Overview of programmes ~ Page 28
0 rpm
0: The spin speed can be changed
before and during the programme (in
rpm, revolutions per minute) depending
on the progress of the programme.
Setting - - - - (Rinse stop = without final
drain/spin cycle), laundry remains in the
water after the last rinse cycle.
Setting 0 (Without any spin cycle), drain
the rinsing water only, no spin cycle.
The maximum spin speed depends on
the programme and model.
Overview of programmes~ Page 28
ñ Finished in
8:Define the Finish in time (end
of programme).
Note: The respective programme
duration is displayed by selecting
the programme. The programme
duration is automatically adjusted while
the programme is running if the
programme duration needs to be
changed, e.g. due to changes in the
programme default settings.
Before the programme starts, the end of
the programme can be preselected in
hourly increments up to a maximum of
24h.
When the programme has started,
the preselected time is displayed e.g.
8h and counts down until
the programme starts. Then the
programme duration is displayed,
e.g. 2:30.
When the programme has started,
the preselected time can be changed
as follows:
1. Touch the Start/Reload button.
2. Touch the ñ Finished in button
and change the Finish in time.
3. Touch the Start/Reload button.
5 Dry
@: The drying function can be
activated, deactivated and set with this
button. Washing and drying without
interruption is possible in automatic
mode only. If the programme for
individual drying is selected, automatic
drying or timed drying with a required
drying duration is available.
#
Selecting additional functions en
33
Notes
■ Programme selection in Intensive
Dry 5 or Gentle Dry ‰ position to
select an individual drying
programme. Overview of
programmes ~ Page 28
The standard drying mode is ». In
this mode the drying time is
automatically set according to the
amount of laundry to be dried. The
result is cupboard-dry laundry.
Drying mode can be set to · in
order to obtain an extra dry result; or
preselect the drying time which can
be specified by selecting the 5 Dry
button. Cupboard dry (»): For
single-layer fabrics. Garments can
be folded or hung up in a cupboard.
Extra dry (·):For fabrics made of
thick, multilayered items of clothing,
which need to be dried longer.
Garments can be folded or hung up
in a cupboard. Laundry more dry
than Cupboard dry.
■ Programme selection in washing
programmes and if washing and
drying is required without
interruption (for Optional drying
programmes):
1. Touch button 5 Dry and activate the
function » or ·.
2. Do not exceed the maximum loads
for drying.
Overview of programmes
~ Page 28
3. Maximum spin speed for the
washing programme will be selected
automatically to obtain a good
drying result.
\ Selecting additional
functions
Selecti ng additional functions
You can select your desired additional
functions by touching the respective
buttons.
G SpeedPerfect
(: For a shorter wash time with a
comparable washing result to the
standard programme.
Note: Do not exceed maximum load.
Overview of programmes~ Page 28
F EcoPerfect
0: Energy-optimised washing by
reducing the temperature while
achieving a consistent washing result.
l Rinse plus
8:Additional rinse cycle depending
on the programme; longer programme
length for particularly sensitive skin
and/or for areas with very soft water.
en Setting the signal
34
MSetting the signal
Setting the signal
Setting signal volume
1. Activate setting mode for signal volume
Turn to Off 1 step clock-
wise
Press Start/
Reload and
hold and
1 step clock-
wise
Release
2. a) Set volume for information signals
Press the ñ Finished in
and set Volume
or Set to Off, setting
mode for signal
volume is left
2. b) Selecting volume of the button signals
1 step clockwise Press the ñ Finished in
and set Volume
Set to Off, setting
mode for signal
volume is left
Cleaning and maintenance en
35
2 Cleaning and
maintenance
Cleaning and maintenance
:Warning
Risk of electric shock!
Danger of death if live parts are
touched.
Switch off the appliance and disconnect
at the mains plug.
:Warning
Risk of poisoning!
Solvent-based cleaning agents, e.g.
petroleum ether, in the washer dryer
may cause toxic vapours.
Do not use solvent-based cleaning
agents.
Caution!
Damage to the appliance
Solvent-based cleaning agents, e.g.
petroleum ether, may damage the
surfaces and components of the washer
dryer.
Do not use solvent-based cleaning
agents.
Appliance housing/control
panel
■
Remove the detergent residue
immediately.
■ Wipe the housing and the control
panel with a soft, damp cloth.
■ Do not use abrasive cloths, sponges
or detergents (stainless steel
cleaner).
■ Do not clean the appliance with a
water jet.
Drum
Use chlorine-free cleaning agents, do
not use steel wool.
Descaling
Not required if detergent dosed
correctly. However, if this does occur,
follow the instructions of the descaling
agent manufacturer. Suitable descalers
can be purchased on our website or
from customer service.
Cleaning the detergent
dispenser
If it contains detergent or fabric softener
residue:
1. Pull out the detergent drawer.
Depress the insert and remove the
drawer completely.
2. Take out insert: using your finger,
press insert upwards.
3. Clean the detergent dispenser and
insert with water and a brush and
dry.
4. Attach the insert and lock into
position (push the cylinder onto the
guide pin).
5. Insert detergent drawer.
Note: Leave the detergent drawer open
so that residual water can evaporate.
en Cleaning and maintenance
36
Drain pump blocked
:Warning
Risk of scalding!
When you wash at high temperatures,
the water gets very hot. If you come into
contact with the hot water, you may be
scalded.
Allow the water to cool down.
1. Turn off the tap so that no more
water can flow in and has to be
drained via the drain pump.
2. Switch off the appliance. Pull out the
mains plug.
3. Open and remove the service flap.
4. Take the drain hose out of the
retainer.
Remove the sealing cap and pour
the water out into a suitable
container.
Replace the sealing cap and place
the drain hose back in the retainer.
5. Carefully unscrew the pump cover;
residual water may leak out.
Clean the interior, pump-cover
thread and pump housing. The
impeller in the drain pump must be
able to rotate.
Refit the pump cover and screw it on
tightly. The handle must be in a
vertical position.
6. Place the service flap back on, lock
it into place, and close it.
Note: To prevent unused detergent
from flowing into the outlet during the
next wash: Pour 1 litre of water into
dispenser II and start the Single Spin
programme: (if only a drained cycle is
required: set rpm (spin speed) to 0 ).
Drainage hose on the siphon
blocked
1.
Turn the programme selector to Off.
Pull out the mains plug.
2. Loosen hose clip, carefully remove
drainage hose. Residual water may
run out.
3. Clean drainage hose and siphon
spigot.
4. Re-attach the drainage hose and
secure the connection point with the
hose clip.
Faults and what to do about them en
37
Filter in the water inlet hose
blocked
:Warning
Danger of death!
Do not immerse the Aqua-Stop safety
device in water (it contains an electric
valve).
First, reduce the water pressure in the
supply hose:
1. Turn off the tap.
2. Select any programme (except
Single Spin).
3. Select Start/Reload. Allow the
programme to run for approx. 40 s.
4. Turn the programme selector to Off.
Pull out the mains plug.
5. Clean the filter on the tap:
Disconnect the hose from the water
tap.
Clean the filter with a small brush.
6. Clean the filter on the back of the
appliance:
Remove the hose from the rear of
the appliance.
Take out the filter with pliers and
clean it.
7. Connect the hose and check for
leaks.
3 Faults and what to do
about them
Faults and what to do about them
Emergency release, e.g. if a
power failure occurs
e.g. in the event of a power cut
The programme will continue running
when the power supply has been
restored.
However, if the laundry has to be
removed, the washer dryer door can be
opened as follows:
:Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of scalding
if you come into contact with detergent
solution and laundry.
If possible, leave it to cool down.
:Warning
Risk of injury!
You may injure your hands if you reach
into the drum while it is turning.
Do not reach into the drum when it is
turning.
Wait until the drum has stopped turning.
Caution!
Water damage
Any escaping water may cause water
damage.
Do not open the washer dryer door if
water can be seen through the glass.
1. Switch off the appliance. Disconnect
the mains plug.
2. Drain the detergent solution
.
3. Pull the emergency release
downwards with a tool and release.
The washer dryer door can then be
opened.
en Faults and what to do about them
38
Information on the display panel
Faults and what to do about them
Information Cause/Remedy
Õ ■ Flashes fast + signal: The door was opened and the water level is too high.
Close the door, continue the programme with Start/Reload button or select
Single spin programme.
■ Flashes slowly: The door lock temperature is too high to open the door. Wait
approx. 30 seconds until the door lock cools down.
Hot The door cannot be opened after the drying programme due to the high tempera-
ture. The cooling process continues until the display disappears, after which the
door can be opened.
| ■ Flashes (no water supply): Tap turned on? Water inlet filter blocked? Clean
the water inlet filter. ~ Page 37
Water hose kinked or blocked?
■ Lights up (low water pressure): For information only. This will not affect the
programme progress. The programme duration is extended.
E:18 Drain pump blocked; clean the drain pump. Clean the drainage hose
on the siphon.
E:32 Alternating display with End when programme is finished: unbalance problem,
spinning phase is aborted.
E:95 Alternating display with End when programme is finished: no water detected in
drying phase, may get bad drying result.
Other displays Turn the programme selector to Off. The appliance is switched off. Wait 5 s and
switch on again. If the display is indicated again, call customer service.
Faults Cause/Remedy
Water is running out. ■ Correctly attach/replace drainage hose.
■ Tighten screw-fitting on the supply hose.
Water not flowing in.
Detergent not dispensed.
■ Start/Reload not selected?
■ Tap not open?
■ Filter blocked? Clean the filter~ Page 37
■ Supply hose kinked or jammed?
The washer dryer door
cannot be opened.
■ Safety function active.
Note: For safety reasons, the washing machine door remains locked
when the water level or temperature is high (See ~ Cancel the pro-
gramme ~ Page 26) or while the drum is rotating.
■ - - - - (Rinse stop = without final drain/spin) selected?
■ Can be opened with emergency lock release only? ~ Page 37
■ Childproof lock active? Deactivate. ~ Page 25
Programme does not
start.
■ Start/Reload or ñ Finished in selected?
■ Door closed?
■ Childproof lock active? Deactivate. ~ Page 25
Faults and what to do about them en
39
Detergent solution is not
drained.
■ - - - - (Rinse stop = without final drain/spin) selected?
■ Clean the drain pump. ~ Page 36
■ Clean outlet pipe and/or drainage hose.
Water not visible in the
drum.
Not a fault – water below the visible area.
Spin result not satisfac-
tory.
Laundry wet/too damp.
■ Not a fault – unbalance detection system has stopped the spin cycle,
washing unevenly distributed. Distribute small and large items of laundry
in the drum.
■ Too low speed selected?
Spin cycle activated sev-
eral times.
Not a fault – unbalanced load detection system adjusts imbalance.
Residual water in the dis-
penser for care product.
■ Not a fault – effect of the care product not impaired.
■ If required, remove the insert. Clean the detergent drawer and re-insert it.
Compartment M is not
rinsed out completely.
Remove the insert. Clean the detergent drawer and reinsert it.
Odour formation in the
washer dryer.
■ Run the Drum Clean 90°C programme without laundry and detergent.
■ Use appropriate detergent for daily washing.
■ keep the door and detergent dispenser open after using.
Status display o is on.
Foam may come out of
the detergent drawer.
Too much detergent used?
■ Mix 1 tablespoon of fabric softener with ½ litre of water and pour into
dispenser II. (Not for outdoor, sports and down-filled textiles!)
■ Reduce detergent dosage for the next wash cycle.
■ Use commercially available low foam detergent and care products which
are suitable for washer dryers.
Excessive noise, vibra-
tions and “wandering”
during the spin cycle.
■ Appliance aligned? Align the appliance.
■ Appliance feet fixed? Secure appliance feet.
■ Transportation bolts are removed? Removing the transportation
bolts.~ Page 10
Display panel/indicator
lights do not function
while the appliance is run-
ning.
■ Power failure?
■ Fuse tripped? Switch on/replace fuse.
■ If the fault occurs repeatedly, call customer service.
The programme duration
changes during the wash
cycle.
■ Not a fault – unbalanced load detection system adjusts imbalance.
■ Not a fault – foam detection function active. Additional rinse cycle.
Detergent residue on the
laundry.
■ Occasionally phosphate-free detergents contain water-insoluble residue.
■ Select Single Rinse or brush items when the laundry is dry.
Spin noise during the dry-
ing phase.
This is an innovative process known as thermal spinning used to reduce
energy consumption during the drying phase.
Fluff found on the washed
laundry.
Run the Drum Clean Ž (cold) programme without laundry and detergent to
remove fluff which have accumulated inside the drum during the previous dry-
ing cycle.
Faults Cause/Remedy
en Faults and what to do about them
40
Water inlet noise during
the drying phase.
The washer dryer uses water condensation technology, water is constantly
needed to dry the laundry. Therefore the tap must be on all the time, till the end
of drying phase.
Drying duration extended. ■ Run the Drum Clean Ž (cold) programme to remove fluff which has col-
lected in the washer drum during the drying phase.
Drying programme does
not start.
■ Drying programme not selected? Overview of programmes ~ Page 28
■ Door not closed properly?
The drying result is not
satisfactory (laundry is
not dry enough).
■ Excessively high ambient temperature (above 30 °C) or inadequate venti-
lation in the room in which the washer dryer is situated.
■ The laundry has not been spun well enough before drying. Always set the
highest selectable spin speed for the particular washing programme.
■ Washer dryer overloaded: Observe the recommendations for the maxi-
mum load in the programme table and on the load display. Do not overload
the washer dryer, as the maximum load for the drying phase is less than
the maximum load for the wash cycle. Unload the washer dryer after wash-
ing with the maximum load and divide the laundry into two drying cycles.
■ The power supply voltage is too low (below 200 V) – provide a suitable
power supply.
■ The water pressure is low. According to water condensing principle, low
water pressure will cause evaporated steam not condensed totally.
■ The tap is closed during drying. Due to the use of the water condensation
technology for drying, please keep the connected water tap open during
the drying process, otherwise proper drying cannot be guaranteed.
■ Thick multilayered textiles or textiles with thick fillings dry easily on the sur-
face, but not inside. This equalisation process may take longer. For these
types of textiles, select drying mode · (Extra dry), or select additional
time drying via Intensive Dry 5 or Gentle Dry ‰ programmes.
If a fault cannot be rectified (switching the machine on and off) or a repair is required:
■ Set the programme selector to Off and pull out the mains plug.
■ Turn off the tap and call customer service.
Faults Cause/Remedy
After-sales service en
41
4 After-sales service
After- sales service
If you cannot rectify a fault yourself, (),
please contact our after-sales service.
We will always find an appropriate
solution to avoid unnecessary visits by
engineers.
Please provide the after-sales service
with the product number (E-Nr.) and the
production number (FD) of the
appliance.
You can find this information
(depending on the model):
■ On the inside of the loading door
■ On the back of the appliance
Trust the expertise of the
manufacturer. Contact us. By doing so,
you can be sure that the repairs are
carried out by trained service personnel
using genuine spare parts.
Advice and repair order in the event of
faults
J Technical specifications
Technical specificati ons
(1U)'
E-Nr. Product number
FD Production number
CN 400 885 5888
Dimensions a= 598 mm
b= 590 mm
c= 848 mm
Weight 78kg
Mains connection Nominal voltage 220V, 50 Hz
Nominal current 10 A
Nominal power 2050 W
Nominal drying power 1650 W
Water pressure 0.1–1 MPa (1–10 bar)
Environmental conditions for
use
(according to GB/T 23118)
Ambient Temperature:
0°C- 40°C, non-freezing
Relative Humidity:
less than 80% (at 25 °C), non-condensing
F
D
E
en Consumption values
42
[ Consumption values
Consumpti on values
Model: XQG80-WDG244601W
XQG80-WDG244681W
XQG80-WDG244C01W
XQG80-WDG284601W
XQG80-WDG284681W
XQG80-WDG284691W
XQG80-WDG284661W
XQG80-WDG284E91W
XQG80-WDG284E01W
Grade* 1 1
Power consumption
(Kwh/cycle)
0.750 0.750
Water consumption (L/
cycle)
59 59
Washing efficiency 1.03 1.03
Noise value**
Maximum Spin value 47 dB(A) 45 dB(A)
Maximum Wash value 70 dB(A) 72 dB(A)
Maximum Drying value 58 dB(A) 57 dB(A)
Washing + Drying consumption value ***
Power consumption
(Kwh/kg)
0.81 0.81
Water consumption (L/
kg)
17 17
* Energy consumption tested under standard programme Cotton 60°C, selected
additional function of EcoPerfect F, according to GB12021.4.
**Noise value tested according to GB19606.
***Washing + Drying consumption tested under standard programme Cotton 60°C,
and additional function of EcoPerfect F, selected Intensive Dry + » (Cupboard
dry) according to GB/T 23118. In the drying cycle for 5kg, the load includes 0
bedsheet, 11pillowcases and towels.
6
%RVFK+RPH$SSOLDQFHV2IILFLDO:HFKDW
Robert Bosch Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
www.bosch-home.com
*9001302809*
9001302809 (9907)
en
Vielen Dank für den Kauf eines
Bosch-Hausgeräts!
Registrieren Sie jetzt Ihr neues Gerät auf MyBosch und profitieren Sie direkt von:
• Tipps und Tricks von Experten für Ihr Gerät
• Optionen für die Garantieverlängerung
• Preisvorteilen für Zubehör und Ersatzteile
• Digitalen Handbüchern und allen Gerätedaten, die sofort verfügbar sind
• Leichtem Zugang zum Bosch Hausgeräte Service
Kostenloser und unkomplizierter Registrierung – auch auf Smartphones:
www.bosch-home.com/welcome
Benötigen Sie Unterstützung?
Hier finden Sie hilfreiche
Informationen.
Ratschläge von Experten für Ihre Bosch-Hausgeräte, wenn Sie Hilfe bei Problemen oder
eine Reparatur von Bosch-Experten benötigen.
Hier erfahren Sie alles über die vielen Möglichkeiten der Unterstützung durch Bosch:
www.bosch-home.com/service
Kontaktdaten aller Länder finden Sie im beigefügten Serviceverzeichnis.
