Loading ...
Loading ...
Loading ...
INSTALLING THE UNIT
19
© 2021 SAPPHIRE
SAPPHIRE Solid Door Refrigerator
Operator’s Manual
6. Reinstall the door seal. Be sure the seal is properly seated.
7. Reinstall the door to the unit.
ANTI-TIP SYSTEM
1. On built-in installations, once the appliance is in place and leveled, secure the two anti-tip brackets
underneath the countertop using the two provided screws.
2. If the brackets for the anti-tip system cannot be secured above the appliance and no wood is available,
relocate the brackets for the anti-tip system to the side of the appliance for securing into an adjacent cabinet.
INTEGRATED GRILL/PLINTH
1. An integrated grill/plinth can be fabricated if desired. The thickness of the panel should be between 1/4
in. to 3/8 in. (6 mm to 9 mm) and the height will vary between 3-5/16 in. to 4-5/16 in. (84 mm to 110 mm)
depending on your grill/plinth height.
OTE: N When nishing the grill/plinth, be sure to stain the front, back and all edges to prevent warping.
2. Apply double-sided tape to the surrounding edges of the integrated grill/plinth.
3. Remove the backing paper from the double-sided tape. Carefully align the grill/plinth over the integrated grill/
plinth and press it into position.
1/4 - 3/8 in.
(6-9 mm)
3-5/16 - 4-5/16 in.
(84-110 mm)
Double-Sided Tape
(Back Side)
Loading ...
Loading ...
Loading ...