Loading ...
Loading ...
Loading ...
Ensure the speed control is at OFF position before plugging the power cord into the socket.
Fan control switch
The control switch positions are:
• 0 = OFF
• 1 = Low Speed
• 2 = Medium Speed
• 3 = High Speed
Turn speed dial to adjust the desired speed.
Adjust tilt by loosening the locking screw on the connector and column holder and tilt to desired
angle/wind direction by moving the guard left/right and re-fasten it.
To activate oscillation, follow the details below.
Figure 1 and Figure 2 show two screw holes for the nut to go into. Set the nut and rod bar to the
outer screw hole (Figure 1) and this will allow the fan to oscillate.
To stop the oscillation set the rod bar and nut to the centre screw hole (figure 2).
Always turn the unit off before changing the oscillation function.
IMPORTANT! NEVER COVER THIS APPLIANCE!
Figure 1 Figure 2
WARNING: Keep all objects at least 1 metre from the front and sides of
the appliance
Always choose a safe location for the fan, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use. This appliance requires no
installation, it should be used solely as a portable appliance.
Operating your Fan
Loading ...
Loading ...
Loading ...