R365PK-1-DE OWNER'S MANUAL

Loading ...

| Getting Started

Napoleon.com | Rogue® Series Grills

Getting Started

WARNING! Do not store a spare gas cylinder below the grill head or side burners.

WARNING! Never use a gas cylinder that is beyond 80% full.

WARNING! Follow all specifications and instructions exactly to prevent fire, explosion, property damage, personal

injury, or death.

WARNING! Disconnect the grill and its individual shutoff valve from the gas supply piping system during any

pressure testing in excess of ½ psi (3.5 kPa).

WARNING! Close the individual shutoff valve to isolate the grill from the gas supply piping system during any

pressure testing equal to or less than ½ Psi (3.5 kPa).

gaS connectionS

Option 1: To a Gas Cylinder

Use a propane cylinder of minimum 6 kg or a butane cylinder of 13 kg

constructed and marked in accordance with national and regional codes. Ensure

that the cylinder can provide enough fuel to operate the appliance. If in doubt,

check with your local gas supplier.

Use a gas pressure regulator and hose supplied by Napoleon; if not included, use

a regulator and hose that meet national and regional codes. The recommended

length of the hose is 0.9m. The hose must never be longer than 1.5m.

Note: The hose should be replaced before the expiry date printed on it.

Only place cylinders within the maximum width and height dimensions inside the

enclosure on the bottom shelf. Cylinders that surpass the maximum dimensions

must be placed outside the enclosure on level ground. Refer to the diagram below

for speciﬁc measurements.

Hook-up and Installation

• Check the cylinder for dents or rust, and have it inspected by your gas

supplier.

• Never use a cylinder with a damaged valve.

• Place the cylinder in its designated area on the bottom shelf.

• Ensure the gas regulator hose has no twists or kinks.

• Remove the cap or plug from the cylinder fuel valve.

• Tighten the regulator to the cylinder valve.

• Ensure the hose does not contact with the drip pan or any high temperature

surfaces of the grill because it will melt and cause a ﬁre.

• Ensure the cylinder is not left exposed to extreme heat or direct sunlight.

• Leak test all joints prior to operating the grill. See “Leak Test”.

310 mm

590 mm

Maximum Cylinder Dimensions

Loading ...

Napoleon R365PK-1-DE GAS GRILL