Loading ...
Loading ...
Loading ...
User Manual of Network Camera
99
the Parity and Flow Control is None.
Note: The Baud Rate, PTZ Protocol and PTZ Address parameters should be exactly
the same as the PTZ camera parameters.
10.10 Service Settings
Go to Configuration> Advanced Configuration> System > Service to enter the service
settings interface.
Service settings refer to the hardware service the camera supports, and it varies
according to the different cameras.
For the cameras support IR LED, ABF (Auto Back Focus), Auto Defog, or Status LED,
you can go to the hardware service, and select to enable or disable the
corresponding service according to the actual demands.
Loading ...
Loading ...
Loading ...