Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
6
STEP 3
1. Using two 3/4 open end wrenches, remove the metal ex hose and the LP gas
hose from the existing valve. Be sure to rotate in opposite directions.
2. Using an 11/16 wrench, remove the LP orice nozzle from the burner tube.
STEP 4
Attach the connector to the quick connector by using wrenches, then using two
3/4 open end wrenches, install the metal ex hose and the natural gas hose to
the existing valve Be sure to rotate in opposite directions.
STEP 5
Slide the clamp over the burner tube and completely cover the air inlet opening
with the clamp. Tighten the clamp completely using the wing screw.
Install Clamp
Air inlet
COVERING THE AIR
INLET OPENING
Burner
Loading ...
Loading ...
Loading ...