Form No. SJ-GFR-091-880E-M
ROCKING CHAIR WITH CANOPY AND PILLOW
GFR-091
If you have any questions or comments,
please call the Bliss Hammocks
®
customer service department at:
1-800-695-2626
©2022 Bliss Hammocks
®
is a registered trademark of Snow Joe, LLC | Made in China
READ THIS BEFORE ASSEMBLING & USING THIS PRODUCT. KEEP
INSTRUCTIONS FOR FUTURE REFERENCE.
NOTE:
Chair pictured below may differ in color/style from the one purchased.
WEIGHT CAPACITY: 360 lbs
mCAUTION: Make sure the chair is opened and locked before sitting in the chair.
mCAUTION: Moving parts under armrest while opening the chair. Do
not put hands under armrests whilel in motion. When closing the rocking
chair, keep clear of the space underneath the armrest and between the
armrest and rocking legs to help preven injury. Rocking chair is intended
for sitting and rocking only. Avoid standing playing, jumping, etc on the
rocking chair to prevent injury.
OPENING:
1. Fully open the rocking chair. Carefully push the metal frame of the
back of the rocking chair while pushing down on the armrest until
you cannot push any further (Fig. 1).
2. The locking system is located on the right side of the rocking chair
frame where the seat and the back of the chair meet. The latch
consists of 2 parts; top and bottom. To lock the chair, pull the
bottom latch and under the protruding knob; then pinch the top
and bottom parts together until it is secure. Make sure it is securely
locked before sitting in the chair. To unlock the latch, oull both top
and bottom parts away from each other and protruding knob.
DELUXE ROCKING CHAIR WITH CANOPY
You may need to unlock the locking system latch TO OPEN
MADE IN CHINA
MAX WEIGHT CAPACITY: 360 LBS
CAUTION: MOVING PARTS ON
ROCKING LEGS. BE CAREFUL
TO KEEP THOSE AREAS CLEAR
WHILE THEY ARE IN MOTION.
TO ATTACH PILLOW
Thread bungee cord* through
eyelid of pillow.
Make sure canopy is unsnapped
and brought to front of chair. Bring
pillow around the front.
Make sure the flat part if the
pillow is resting above the snap
holders and flat against the
fabric of the chair. Thread other
end of bungee cord through the
pillow’s eyelid.
The locking system (latch lock) is located on the right side of the rocking chair frame,
where the seat and the back of the chair meet. The latch consists of 2 parts: top and
bottom. To lock the chair, pull the bhottom latch down and under the protruding knob;
then pinch the top and bottom parts together until it is secure. Make sure it is securely
locked before sitting in the chair. To unlock the latch, pull both the top and bottom parts
away from each other and protruding knob.
Fully open the rocking chair: Carefully, push the metal
frame of the back of the rocking chair while pushing
down on the armrest until you cannot push any further.
Canopy is snapped against back of rocking chair.
Unsnap the canopy and rotate it over the chair. Adjust
the canopy to block out sun.
TO CLOSE
Unlock the rocking chair.
Snap the canopy into the snap locks on the
back. Make sure the canopy is flat against the
back.
Fold the rocking chair by pulling the metal
frame of the seat inwards with the metal frame
of the back. It is fully closed when the rocking
legs are flush against the rest of the rocking
chair.
1.
2.
3.
PLEASE NOTE: CHAIR PICTURED BELOW MAY DIFFER IN COLOR/STYLE FROM THE
ONE PURCHASED. THERE IS NO LUNCH TRAY FOR THIS MODEL. A LUNCH TRAY
WILL NOT FIT THE ROCKING CHAIR.
*Note:
knob
MAKE SURE THE CHAIR IS OPENED AND
LOCKED BEFORE SITTING IN THE CHAIR.
3. Canopy is snapped agaisnt the back of rocking chair. Unsnap the
canopy and rotate it over the chair. Adjust as needed. (Fig. 3).
ATTATCHING PILLOW:
1. Thread bungee cord through eyelid of pillow. Make sure canopy
is unsnapped and brought to the front of the chair. Bring pillow
around the front.
DELUXE ROCKING CHAIR WITH CANOPY
You may need to unlock the locking system latch TO OPEN
MADE IN CHINA
MAX WEIGHT CAPACITY: 360 LBS
CAUTION: MOVING PARTS ON
ROCKING LEGS. BE CAREFUL
TO KEEP THOSE AREAS CLEAR
WHILE THEY ARE IN MOTION.
TO ATTACH PILLOW
Thread bungee cord* through
eyelid of pillow.
Make sure canopy is unsnapped
and brought to front of chair. Bring
pillow around the front.
Make sure the flat part if the
pillow is resting above the snap
holders and flat against the
fabric of the chair. Thread other
end of bungee cord through the
pillow’s eyelid.
The locking system (latch lock) is located on the right side of the rocking chair frame,
where the seat and the back of the chair meet. The latch consists of 2 parts: top and
bottom. To lock the chair, pull the bhottom latch down and under the protruding knob;
then pinch the top and bottom parts together until it is secure. Make sure it is securely
locked before sitting in the chair. To unlock the latch, pull both the top and bottom parts
away from each other and protruding knob.
Fully open the rocking chair: Carefully, push the metal
frame of the back of the rocking chair while pushing
down on the armrest until you cannot push any further.
Canopy is snapped against back of rocking chair.
Unsnap the canopy and rotate it over the chair. Adjust
the canopy to block out sun.
TO CLOSE
Unlock the rocking chair.
Snap the canopy into the snap locks on the
back. Make sure the canopy is flat against the
back.
Fold the rocking chair by pulling the metal
frame of the seat inwards with the metal frame
of the back. It is fully closed when the rocking
legs are flush against the rest of the rocking
chair.
1.
2.
3.
PLEASE NOTE: CHAIR PICTURED BELOW MAY DIFFER IN COLOR/STYLE FROM THE
ONE PURCHASED. THERE IS NO LUNCH TRAY FOR THIS MODEL. A LUNCH TRAY
WILL NOT FIT THE ROCKING CHAIR.
*Note:
knob
MAKE SURE THE CHAIR IS OPENED AND
LOCKED BEFORE SITTING IN THE CHAIR.
3. Fold the rocking chair by pulling the metal frame of the seat inwards
with the metal frame of the back. It is fully closed when the rocking
legs are ush against the rest of the rocking chair.
DELUXE ROCKING CHAIR WITH CANOPY
You may need to unlock the locking system latch TO OPEN
MADE IN CHINA
MAX WEIGHT CAPACITY: 360 LBS
CAUTION: MOVING PARTS ON
ROCKING LEGS. BE CAREFUL
TO KEEP THOSE AREAS CLEAR
WHILE THEY ARE IN MOTION.
TO ATTACH PILLOW
Thread bungee cord* through
eyelid of pillow.
Make sure canopy is unsnapped
and brought to front of chair. Bring
pillow around the front.
Make sure the flat part if the
pillow is resting above the snap
holders and flat against the
fabric of the chair. Thread other
end of bungee cord through the
pillow’s eyelid.
The locking system (latch lock) is located on the right side of the rocking chair frame,
where the seat and the back of the chair meet. The latch consists of 2 parts: top and
bottom. To lock the chair, pull the bhottom latch down and under the protruding knob;
then pinch the top and bottom parts together until it is secure. Make sure it is securely
locked before sitting in the chair. To unlock the latch, pull both the top and bottom parts
away from each other and protruding knob.
Fully open the rocking chair: Carefully, push the metal
frame of the back of the rocking chair while pushing
down on the armrest until you cannot push any further.
Canopy is snapped against back of rocking chair.
Unsnap the canopy and rotate it over the chair. Adjust
the canopy to block out sun.
TO CLOSE
Unlock the rocking chair.
Snap the canopy into the snap locks on the
back. Make sure the canopy is flat against the
back.
Fold the rocking chair by pulling the metal
frame of the seat inwards with the metal frame
of the back. It is fully closed when the rocking
legs are flush against the rest of the rocking
chair.
1.
2.
3.
PLEASE NOTE: CHAIR PICTURED BELOW MAY DIFFER IN COLOR/STYLE FROM THE
ONE PURCHASED. THERE IS NO LUNCH TRAY FOR THIS MODEL. A LUNCH TRAY
WILL NOT FIT THE ROCKING CHAIR.
*Note:
knob
MAKE SURE THE CHAIR IS OPENED AND
LOCKED BEFORE SITTING IN THE CHAIR.
CLOSING:
1. Unlock the rocking chair.
2. Snap the canopy into the snap locks on the back. Make sure the
canopy is at against the back.
3. Fold the rocking chair by pulling the metal frame of the seat inwards
with the metal frame of the back. It is fully closed when the rocking
legs are ush against the rest of the rocking chair. .
DELUXE ROCKING CHAIR WITH CANOPY
You may need to unlock the locking system latch TO OPEN
MADE IN CHINA
MAX WEIGHT CAPACITY: 360 LBS
CAUTION: MOVING PARTS ON
ROCKING LEGS. BE CAREFUL
TO KEEP THOSE AREAS CLEAR
WHILE THEY ARE IN MOTION.
TO ATTACH PILLOW
Thread bungee cord* through
eyelid of pillow.
Make sure canopy is unsnapped
and brought to front of chair. Bring
pillow around the front.
Make sure the flat part if the
pillow is resting above the snap
holders and flat against the
fabric of the chair. Thread other
end of bungee cord through the
pillow’s eyelid.
The locking system (latch lock) is located on the right side of the rocking chair frame,
where the seat and the back of the chair meet. The latch consists of 2 parts: top and
bottom. To lock the chair, pull the bhottom latch down and under the protruding knob;
then pinch the top and bottom parts together until it is secure. Make sure it is securely
locked before sitting in the chair. To unlock the latch, pull both the top and bottom parts
away from each other and protruding knob.
Fully open the rocking chair: Carefully, push the metal
frame of the back of the rocking chair while pushing
down on the armrest until you cannot push any further.
Canopy is snapped against back of rocking chair.
Unsnap the canopy and rotate it over the chair. Adjust
the canopy to block out sun.
TO CLOSE
Unlock the rocking chair.
Snap the canopy into the snap locks on the
back. Make sure the canopy is flat against the
back.
Fold the rocking chair by pulling the metal
frame of the seat inwards with the metal frame
of the back. It is fully closed when the rocking
legs are flush against the rest of the rocking
chair.
1.
2.
3.
PLEASE NOTE: CHAIR PICTURED BELOW MAY DIFFER IN COLOR/STYLE FROM THE
ONE PURCHASED. THERE IS NO LUNCH TRAY FOR THIS MODEL. A LUNCH TRAY
WILL NOT FIT THE ROCKING CHAIR.
*Note:
knob
MAKE SURE THE CHAIR IS OPENED AND
LOCKED BEFORE SITTING IN THE CHAIR.
DELUXE ROCKING CHAIR WITH CANOPY
You may need to unlock the locking system latch TO OPEN
MADE IN CHINA
MAX WEIGHT CAPACITY: 360 LBS
CAUTION: MOVING PARTS ON
ROCKING LEGS. BE CAREFUL
TO KEEP THOSE AREAS CLEAR
WHILE THEY ARE IN MOTION.
TO ATTACH PILLOW
Thread bungee cord* through
eyelid of pillow.
Make sure canopy is unsnapped
and brought to front of chair. Bring
pillow around the front.
Make sure the flat part if the
pillow is resting above the snap
holders and flat against the
fabric of the chair. Thread other
end of bungee cord through the
pillow’s eyelid.
The locking system (latch lock) is located on the right side of the rocking chair frame,
where the seat and the back of the chair meet. The latch consists of 2 parts: top and
bottom. To lock the chair, pull the bhottom latch down and under the protruding knob;
then pinch the top and bottom parts together until it is secure. Make sure it is securely
locked before sitting in the chair. To unlock the latch, pull both the top and bottom parts
away from each other and protruding knob.
Fully open the rocking chair: Carefully, push the metal
frame of the back of the rocking chair while pushing
down on the armrest until you cannot push any further.
Canopy is snapped against back of rocking chair.
Unsnap the canopy and rotate it over the chair. Adjust
the canopy to block out sun.
TO CLOSE
Unlock the rocking chair.
Snap the canopy into the snap locks on the
back. Make sure the canopy is flat against the
back.
Fold the rocking chair by pulling the metal
frame of the seat inwards with the metal frame
of the back. It is fully closed when the rocking
legs are flush against the rest of the rocking
chair.
1.
2.
3.
PLEASE NOTE: CHAIR PICTURED BELOW MAY DIFFER IN COLOR/STYLE FROM THE
ONE PURCHASED. THERE IS NO LUNCH TRAY FOR THIS MODEL. A LUNCH TRAY
WILL NOT FIT THE ROCKING CHAIR.
*Note:
knob
MAKE SURE THE CHAIR IS OPENED AND
LOCKED BEFORE SITTING IN THE CHAIR.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 4
