Loading ...
Loading ...
Loading ...
Recessed Electric Fireplace
www.touchstonehomeproducts.com
800.215.1990
Update: 20201019
29
Remote Control Operation
• This remote control uses 1 CR2025 battery (included).
• To improve operation of the remote control, aim the remote control at the front of the fireplace. DO NOT
PRESS the buttons too quickly. Give the unit time to respond to each command.
• NOTICE: NEVER dispose of batteries in fire. Failure to observe this precaution may result in an
explosion. Dispose of batteries at your local hazardous material processing center.
Replacing Remote Control Battery
The following is instructions for replacing the battery in the remote control:
1. Pinch the latch toward the battery compartment.
2. Pull the battery compartment out to remove battery.
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe temperature, the
heater will automatically TURN OFF. To reset, please do the following:
1. Unplug the power cord from the outlet.
2. Turn ON/OFF switch on the CONTROL PANEL to OFF. Wait 5 minutes for fireplace to cool down.
3. Inspect the fireplace to make sure no vents are blocked or clogged with dust or lint. If they are, use a vacuum to
clean the vent areas.
4. With the POWER switch in the OFF position, plug the power cord back into the outlet.
5. If the problem continues, have your outlet and wiring inspected by a professional. If the outlet is OK, please
contact our customer support department at 800-215-1990.
Loading ...
Loading ...
Loading ...