Loading ...
Loading ...
Loading ...
8
INITIAL INSTALLATION
4. Loosen all four mounting bracket screws (R), then
completely remove the two mounting bracket screws
(R) from the round holes of canopy (E). Set aside for
later use.
Detach mounting bracket (D) from canopy (E).
5. Attach mounting bracket (D) to outlet box (not
included) using screws and washers provided with the
outlet box.
CAUTION: It is very important you use the proper
hardware when installing the mounting bracket (D) as
it will support the fan.
6. Remove the 10 preassembled motor screws (O),
washers, and ve preassembled motor blocks from
the underside of the motor assembly (I). Discard the
motor blocks and washers but save the motor screws
(O) for later.
Note: The notch in the tter plate allows a Phillips
screwdriver (not included) access to motor screws
(O).
For Standard or Angle Mounting Instructions,
continue to page 9. For Closemount Instructions,
proceed to page 11.
4
5
6
Standard and
Closemount
Mounting
Mounting
Angle
D
R
E
D
D
O
J
I
Notch
Motor Block
Washer
Loading ...
Loading ...
Loading ...